PU-48 是一种可穿透血脑屏障的尿素转运蛋白 (urea transporter) 抑制剂,对大鼠 UT-A 的 IC50 为 0.32 μM,通过功能性抑制肾内髓集合管中的尿素转运蛋白 (包括 UT-A 亚型) 诱导尿素选择性利尿,且不改变血液中的钠、钾或氯离子水平,也不影响非尿素溶质的排泄,对细胞或动物模型无显著毒性,可用于水肿相关的研究。
产品编号: MS-Z12460 纯度: 99.76% CAS No.: 335394-78-0 分子式: C14H12N2O3S 分子量: 288.32
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价

产品描述

PU-48 是一种可穿透血脑屏障的尿素转运蛋白 (urea transporter) 抑制剂,对大鼠 UT-A 的 IC50 为 0.32 μM,通过功能性抑制肾内髓集合管中的尿素转运蛋白 (包括 UT-A 亚型) 诱导尿素选择性利尿,且不改变血液中的钠、钾或氯离子水平,也不影响非尿素溶质的排泄,对细胞或动物模型无显著毒性,可用于水肿相关的研究。

生物实验数据

生物活性 PU-48 is a blood-brain barrier-penetrant urea transporter inhibitor with an IC50 of 0.32 μM against rat UT-A that induces urea-selective diuresis by functionally inhibiting urea transporters (including UT-A isoforms) in the inner medullary collecting duct, does not alter blood sodium, potassium, or chloride levels, does not affect the excretion of non-urea solutes, and shows no significant toxicity in cell or animal models, making it suitable for research related to edema.
体外研究
(In Vitro)

PU-48 (0.25-4 µg/mL; 24 h) 在人血浆中表现出较高的血浆蛋白结合率 (超过 89%),且在所测试的浓度范围内无浓度依赖性差异。
PU-48 (10-9-10-4 M; 6 min) 可强效且特异性地抑制人、大鼠和小鼠红细胞中 UT-B 介导的尿素转运,其 IC50 值分别为 0.21 μM、0.33 μM 和 2.1 μM。
PU-48 (4 μM; 60 min) 可抑制表达 UT-A1 的 I 型 MDCK 细胞中 UT-A1 介导的尿素转运,IC50=0.32 μM,效力约为其抑制表达 UT-B 的 I 型 MDCK 细胞中 UT-B 介导转运作用的 2.8 倍 (IC50=0.90 μM)。
PU-48 (5-80 μM; 72 h) 在浓度高达 80 μM、孵育 72 h 后,对 I 型 MDCK 细胞无细胞毒性。
PU-48 (10 μM) 在稳定转染的 HEK293 细胞中不会抑制 hERG、NaV1.5 或 CaV1.2 通道的活性。

Cell Cytotoxicity Assay

Cell Line: Type I MDCK cells
Concentration: 5-80 μM
Incubation Time: 72 h
Result: Did not significantly reduce MDCK cell viability at concentrations up to 80 μM, with viability remaining near 100% relative to controls.
体内研究
(In Vivo)

PU-48 (12 mg/kg;口服;单次) 可在健康大鼠体内快速且广泛地分布于各组织中,在胃肠道、肝脏、肾脏和膀胱 (利尿活性的靶组织) 中浓度较高,能够穿过血脑屏障,且在 24 小时内无组织蓄积。
PU-48 (100 mg/kg;皮下注射;单次给药) 可在 UT-B 基因敲除和野生型雄性 C57BL/6 小鼠中诱导尿素选择性利尿,且不改变电解质排泄。
PU-48 (3.125-50 mg/kg;皮下注射;单次给药) 在 12.5 和 50 mg/kg 的皮下剂量下可诱导雄性 SD 大鼠产生剂量依赖性利尿作用,给药后 2 h 达到药效峰值。
PU-48 (50-100 mg/kg;皮下注射;每 8 小时 1 次;连续 6 天) 可在雄性 SD 大鼠中诱导持续性利尿,给药方案为连续 6 天每日 2 次皮下注射 50 mg/kg (首次剂量为 100 mg/kg),且不会引起电解质紊乱或改变肾转运体/水通道蛋白的表达。
PU-48 (14 g/kg;口服;单次给药) 对 4 周龄的雄性和雌性 CD-ICR 小鼠无急性毒性。

Animal Model: C57BL/6 UT-B null mice (10-week-old male, ~25 g); C57BL/6 wild-type mice (10-week-old male, ~25 g)
Dosage: 100 mg/kg
Administration: s.c.; single dose
Result: Significantly increased urine output in both UT-B null and wild-type mice.
Decreased urinary osmolality in both UT-B null and wild-type mice.
Decreased urinary urea concentration in both UT-B null and wild-type mice.
Decreased urinary non-urea solute concentration in both UT-B null and wild-type mice.
Increased urea excretion in both UT-B null and wild-type mice.
Did not change excretion of non-urea solutes (including Na+, K+, Cl-) in either group.
Reached peak changes at 2 h post-administration, with values returning to basal levels by 10 h.
Animal Model: Sprague-Dawley (SD) rats (male, 200~220 g)
Dosage: 3.125 mg/kg; 12.5 mg/kg; 50 mg/kg
Administration: s.c.; single dose
Result: Caused a dose-dependent increase in urine output at doses of 12.5 and 50 mg/kg.
Significantly reduced urinary osmolality at doses of 12.5 and 50 mg/kg (P<0.05).
Significantly reduced urinary urea concentration at doses of 12.5 and 50 mg/kg (P<0.05).
Showed no significant effect at the 3.125 mg/kg dose.
Reached peak changes at 2 h post-administration, with values returning to basal levels by 10 h.
Animal Model: Sprague-Dawley (SD) rats (male, 200~220 g)
Dosage: 50 mg/kg; 100 mg/kg (first dose)
Administration: s.c.; every 8 h; 6 days
Result: Caused continuous diuresis over the 6-day treatment period, with diuretic efficacy similar to that of hydrochlorothiazide (HCTZ).
Reduced urinary osmolality over the 6-day treatment period.
Reduced urinary urea concentration over the 6-day treatment period.
Did not significantly alter blood levels of Na+, K+, Cl-, urea, glucose, cholesterol, or triglycerides compared to vehicle controls.
Significantly reduced inner medullary tissue osmolality.
Significantly reduced inner medullary urea concentration.
Did not affect inner medullary Na+ or Cl- concentrations.
Caused no significant changes in renal protein expression levels of UT-A1, UT-A2, UT-A3, UT-B, AQP1, AQP2, AQP3, AQP4, NCC, or NKCC2.
性状 固体
颜色 Light yellow to yellow

化学信息

分子量 288.32
分子式 C14H12N2O3S
CAS No. 335394-78-0

储存&溶解度

储存方式

4°C, protect from light, stored under nitrogen

*In solvent: -80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 6.67 mg/mL (23.13 mM; 超声助溶 (<60°C); 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM3.4684 mL17.3418 mL34.6837 mL86.7092 mL
5 mM0.6937 mL3.4684 mL6.9367 mL17.3418 mL
10 mM0.3468 mL1.7342 mL3.4684 mL8.6709 mL
15 mM0.2312 mL1.1561 mL2.3122 mL5.7806 mL
20 mM0.1734 mL0.8671 mL1.7342 mL4.3355 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (protect from light, stored under nitrogen)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础