S-4048 是一种葡萄糖-6-磷酸转位酶调节剂和降糖剂,通过 OATP-1 被肝细胞摄取并在大鼠体内经肝胆系统快速消除,它能够阻断葡萄糖-6-磷酸转位酶、阻止葡萄糖-6-磷酸进入内质网,从而干扰葡萄糖-6-磷酸酶系统(即肝糖异生和糖原分解的最后步骤)以调节肝葡萄糖生成,能完全抑制 GLUT2 缺失肝细胞中由丙酮酸生成葡萄糖的过程且不影响胞质葡萄糖的释放,并能有效降低大鼠血糖水平,已被应用于 2 型糖尿病的相关研究。
产品编号: MS-N01233 CAS No.: 173534-37-7 分子式: C32H30ClN3O7 分子量: 604.05
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

S-4048 是一种葡萄糖-6-磷酸转位酶调节剂和降糖剂,通过 OATP-1 被肝细胞摄取并在大鼠体内经肝胆系统快速消除,它能够阻断葡萄糖-6-磷酸转位酶、阻止葡萄糖-6-磷酸进入内质网,从而干扰葡萄糖-6-磷酸酶系统(即肝糖异生和糖原分解的最后步骤)以调节肝葡萄糖生成,能完全抑制 GLUT2 缺失肝细胞中由丙酮酸生成葡萄糖的过程且不影响胞质葡萄糖的释放,并能有效降低大鼠血糖水平,已被应用于 2 型糖尿病的相关研究。

生物实验数据

生物活性 S-4048 is a glucose-6-phosphate translocase modulator and antihyperglycemic agent that is taken up by hepatocytes via OATP-1 and rapidly eliminated through the hepatobiliary system in rats; it blocks glucose-6-phosphate translocase, preventing glucose-6-phosphate from entering the endoplasmic reticulum and thereby interfering with the glucose-6-phosphatase system (i.e., the final steps of hepatic gluconeogenesis and glycogenolysis) to regulate hepatic glucose production, completely inhibits glucose production from pyruvate in GLUT2-deficient hepatocytes without affecting cytosolic glucose release, and effectively lowers blood glucose levels in rats, having been applied in research related to type 2 diabetes.
IC50 & Target

IC50:9.4 nM for rat microsomes.

体外研究
(In Vitro)

S-4048 (10 μM; 30-60 min) 不会抑制 GLUT2-/- 小鼠肝细胞释放胞质葡萄糖,这表明该次要葡萄糖释放通路不需要葡萄糖通过葡萄糖-6-磷酸转位酶重新进入内质网。

体内研究
(In Vivo)

S-4048 (30-50 mg/kg;静脉注射) 可降低饥饿雄性 Wistar 大鼠的血糖水平;50 mg/kg 静脉推注后呈现短效作用,而 30 mg/kg/h 静脉输注期间可维持血糖降低 50%的效果。
S-4048 (10 mg/kg;静脉推注) 在雄性 Wistar 大鼠体内会发生快速的肝胆消除,10 mg/kg 静脉推注剂量中 57%的药物在 30 分钟内以原型药物形式经胆汁排泄,从而产生较高的血浆清除率。
S-4048 (10-50 mg/kg;静脉推注) 在雄性 mrp-2 缺陷型 GY/TR3 大鼠中表现出短暂的降血糖作用,且其肝胆消除能力与 Wistar 大鼠相当。

Animal Model: Wistar (male, 280-360 g, starved for 24 hours prior to experiments)
Dosage: 50 mg/kg (blood glucose reduction); 30 mg/kg/h (sustained blood glucose reduction)
Administration: i.v. bolus injection; i.v. infusion
Result: Reduced blood glucose to maximum at 45 minutes, with levels returning to control values within 60 minutes after 50 mg/kg i.v. bolus injection.
Stabilized blood glucose levels at approximately 50% of the control group level after 60 minutes during constant 30 mg/kg/h i.v. infusion.
Animal Model: Wistar (male, 280-360 g, starved for 24 hours prior to experiments)
Dosage: 10 mg/kg
Administration: i.v. bolus injection
Result: Recovered 57% of the total administered dose as parent compound in bile within the first 30 minutes after administration.
Reached initial plasma concentrations of approximately 14 μmol/l, with a plasma clearance of about 80 mL/min/kg and an estimated half-life of about 10 minutes.
Animal Model: GY/TR3 (male, 280-360 g, mrp-2 deficient mutant Wistar strain, starved for 24 hours prior to experiments)
Dosage: 50 mg/kg (blood glucose study); 10 mg/kg (hepatobiliary elimination study)
Administration: i.v. bolus injection
Result: Lowered blood glucose with effect lasting as short as in Wistar rats, with levels returning to control values within 60-90 minutes after 50 mg/kg i.v. bolus injection.
Exhibited hepatobiliary elimination profile similar to that in Wistar rats after 10 mg/kg i.v. bolus injection.

化学信息

分子量 604.05
分子式 C32H30ClN3O7
CAS No. 173534-37-7

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础