CK2-TN03 是一种 ATP 竞争型的酪蛋白激酶 2 (CK2) 抑制剂,IC50 为 165 nM,Ki 为 20 nM,可抑制 CK2 介导的 survivin 激活并降低 CK2 依赖的 BRD4/MYCN 与 AKT1 磷酸化水平,从而通过抑制 survivin 发挥抗神经母细胞瘤作用,导致癌细胞有丝分裂灾难和凋亡 (apoptosis),可用于神经母细胞瘤的相关研究。
产品编号: MS-K71918 纯度: 98.02% CAS No.: 313226-24-3 分子式: C17H14N2O3S 分子量: 326.37
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价

产品描述

CK2-TN03 是一种 ATP 竞争型的酪蛋白激酶 2 (CK2) 抑制剂,IC50 为 165 nM,Ki 为 20 nM,可抑制 CK2 介导的 survivin 激活并降低 CK2 依赖的 BRD4/MYCN 与 AKT1 磷酸化水平,从而通过抑制 survivin 发挥抗神经母细胞瘤作用,导致癌细胞有丝分裂灾难和凋亡 (apoptosis),可用于神经母细胞瘤的相关研究。

生物实验数据

生物活性 CK2-TN03 is an ATP-competitive casein kinase 2 (CK2) inhibitor with an IC50 of 165 nM and a Ki of 20 nM that inhibits CK2-mediated survivin activation and reduces CK2-dependent BRD4/MYCN and AKT1 phosphorylation, thereby exerting anti-neuroblastoma effects through survivin inhibition and inducing mitotic catastrophe and apoptosis in cancer cells, and can be used for research related to neuroblastoma.
IC50 & Target

CK2

165 nM (IC50)

Caspase 3

 

Caspase-7

 

BRD4

 

Akt1

 

体外研究
(In Vitro)

CK2-TN03 (0.2-25.0 μM; 48 h) 可在髓母细胞瘤 DAOY 细胞株及多种神经母细胞瘤细胞株中诱导剂量依赖性细胞死亡,其 EC50 值范围为 0.31 至 1.95 μM;而在胶质母细胞瘤 U87 细胞中无活性 (EC50 >25 μM)。
CK2-TN03 (0.35-1.0 μM; 48 h) 以时间依赖方式激活 CHP-212 神经母细胞瘤细胞中的 caspase 3/7,主要诱导 caspase 依赖性细胞凋亡。
CK2-TN03 (0.5-1.0 μM; 24-48 h) 可诱导 CHP-212 神经母细胞瘤细胞发生 G2/M 期细胞周期阻滞及后续细胞死亡。
CK2-TN03 (0.5 μM; 24 h) 可使 CHP-212 神经母细胞瘤细胞停滞于有丝分裂期,阻断细胞成功分裂并引发有丝分裂灾难与细胞死亡。
CK2-TN03 (0.5 μM; 48 h) 可通过直接抑制 survivin 的 CK2 介导磷酸化,间接改变 AKT1/MDM2/p53 与 BRD4/MYCN 通路,下调 CHP-212 神经母细胞瘤细胞中 survivin 的活性与表达,同时不改变 CK2 的表达。
CK2-TN03 (0.5 μM; 48 h) 不影响分化的静息态 SH-SY5Y 神经母细胞瘤细胞的活力,这类细胞的 survivin 表达水平较低。
CK2-TN03 (1-10 μM; 72 h) 可在由 160 种癌细胞系组成的多样化细胞组中诱导细胞死亡,且具有显著的肿瘤实体选择性,对黑色素瘤、淋巴瘤、肺癌、神经母细胞瘤、卵巢癌、骨髓瘤、软组织癌和骨肉瘤细胞系的效力最高。
CK2-TN03 (10 μM; 1 h) 在 MDCKII-MDR1 细胞中表现出极佳的通透性,外排作用可忽略不计,且不具备 P-gp 底物活性。

Apoptosis Analysis

Cell Line: Neuroblastoma CHP-212
Concentration: 0.35, 0.5 and 1.0 μM
Incubation Time: 48 h (monitored every 2 h)
Result: Induced a time-dependent increase in caspase 3/7 activation, with significantly higher activation levels observed from 18 h onward compared to vehicle-treated controls.
Left a fraction of cell death unaffected by cotreatment with pan-caspase inhibitor Q-VD-OPh, while the inhibitor reduced most CK2-TN03-induced cell death.

Cell Cycle Analysis

Cell Line: Neuroblastoma CHP-212
Concentration: 0.5 and 1.0 μM
Incubation Time: 24 h, 48 h
Result: Increased the percentage of cells in the G2/M phase and the subG1 (dead cell) population after 24 and 48 h of treatment, with significant increases observed at both concentrations and time points compared to controls.
Increased G2/M phase cells after 24 h at 0.5 μM and 1.0 μM.
Further elevated G2/M and subG1 populations after 48 h at both concentrations.

Cell Viability Assay

Cell Line: Differentiated neuroblastoma SH-SY5Y
Concentration: 0.5 μM
Incubation Time: 48 h
Result: Did not reduce viability of differentiated SH-SY5Y cells, which had ~20% of the survivin protein levels present in undifferentiated cells.
体内研究
(In Vivo)

CK2-TN03 (40 mg/kg; i.p.; 每日一次共 28 天) 可显著抑制神经母细胞瘤异种移植瘤的生长并改善小鼠存活率,部分小鼠实现了肿瘤的长期控制或缓解。

Animal Model: (Ncr)-Foxn1 nu nude mice (7-8 weeks old)
Dosage: 40 mg/kg
Administration: i.p.; once daily; 28 days
Result: Reduced tumor growth rate, with tumor volume relative to baseline (VTx/VT0) reaching ~6 on day 28, compared to ~9 in vehicle controls.
Improved mouse survival: 5 treated mice survived to day 49, compared to 1 vehicle-treated mouse; 2 treated mice survived beyond day 85, with one showing complete tumor remission by day 14 and the other exhibiting a small, non-growing tumor mass post-treatment.
Increased p53 levels and decreased survivin levels and survivin phosphorylation in tumor tissue.
性状 固体
颜色 Light yellow to yellow

化学信息

分子量 326.37
分子式 C17H14N2O3S
CAS No. 313226-24-3

储存&溶解度

储存方式
Powder -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 83.33 mg/mL (255.32 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM3.0640 mL15.3200 mL30.6401 mL76.6002 mL
5 mM0.6128 mL3.0640 mL6.1280 mL15.3200 mL
10 mM0.3064 mL1.5320 mL3.0640 mL7.6600 mL
15 mM0.2043 mL1.0213 mL2.0427 mL5.1067 mL
20 mM0.1532 mL0.7660 mL1.5320 mL3.8300 mL
25 mM0.1226 mL0.6128 mL1.2256 mL3.0640 mL
30 mM0.1021 mL0.5107 mL1.0213 mL2.5533 mL
40 mM0.0766 mL0.3830 mL0.7660 mL1.9150 mL
50 mM0.0613 mL0.3064 mL0.6128 mL1.5320 mL
60 mM0.0511 mL0.2553 mL0.5107 mL1.2767 mL
80 mM0.0383 mL0.1915 mL0.3830 mL0.9575 mL
100 mM0.0306 mL0.1532 mL0.3064 mL0.7660 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础