Pro-PTX 是一种对 Pd 敏感的紫杉醇 前药,具有抗癌活性,可经 Pd 催化的去炔丙基化反应触发分子内环化,释放出活性 Paclitaxel 和一种无毒副产物,在癌细胞和非癌性人脑血管周细胞中表现出低细胞毒性和抗增殖活性,可用于非小细胞肺癌、胶质母细胞瘤和肺癌的相关研究。
产品编号: MS-K67392 CAS No.: 3011748-20-9 分子式: C56H63N3O17 分子量: 1050.11
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Pro-PTX 是一种对 Pd 敏感的紫杉醇 前药,具有抗癌活性,可经 Pd 催化的去炔丙基化反应触发分子内环化,释放出活性 Paclitaxel 和一种无毒副产物,在癌细胞和非癌性人脑血管周细胞中表现出低细胞毒性和抗增殖活性,可用于非小细胞肺癌、胶质母细胞瘤和肺癌的相关研究。

生物实验数据

生物活性 Pro-PTX is a Pd-sensitive prodrug of paclitaxel with anticancer activity that undergoes Pd-catalyzed depropargylation-triggered intramolecular cyclization to release active Paclitaxel and a nontoxic byproduct, exhibits low cytotoxicity and antiproliferative activity in cancer cells and noncancerous human brain vascular pericytes, and can be used for research on non-small cell lung cancer, glioblastoma, and lung cancer.
体外研究
(In Vitro)

Pro-PTX (0.001-10 μM; 5 days) 在 A549 (EC50 = 1.75 μM)、U87 (EC50 = 0.54 μM) 和 HBVPs (EC50 = 4.4 μM) 细胞中表现出低细胞毒性,仅在浓度≥1 μM 时可观察到活性。
Pro-PTX (100 μM; 10 h) 在 37 °C 条件下与聚合物负载 Pd 催化剂于 PBS 中孵育后,会完全转化为具有活性的 PTX。
Pro-PTX (0.75 μM; 48 h) 与 Pd 海藻酸盐水凝胶联合处理 A549 细胞可激活该前药,产生与活性 PTX 诱导的完全一致的微管稳定作用。

Cell Cytotoxicity Assay

Cell Line: human non-small-cell lung carcinoma A549 cells, human glioblastoma U87 cells, human brain vascular pericytes (HBVPs)
Concentration: 0.001-10 μM
Incubation Time: 5 days
Result: Reduced cell viability only at concentrations ≥1 μM in A549 cells, with an EC50 value of 1.75 μM.
Reduced cell viability only at concentrations ≥1 μM in U87 cells, with an EC50 value of 0.54 μM.
Showed negligible antiproliferative effect at most tested concentrations in HBVPs, with an EC50 value of 4.4 μM.

Immunofluorescence

Cell Line: human non-small-cell lung carcinoma A549 cells
Concentration: 0.75 μM
Incubation Time: 48 h
Result: Resulted in clear microtubule accumulation when co-treated with Pd Alginate hydrogels, identical to the pattern observed with active PTX treatment.
体内研究
(In Vivo)

Pro-PTX (20 mg/kg; 腹腔注射) 经 Pd-EV 介导的生物正交催化激活后,可在 BALB/c nu/nu 小鼠中显著、持续地抑制异种移植肺癌的生长。
Pro-PTX (10-20 mg/kg;腹腔注射;两次给药间隔 3 天) 在健康 BALB/c nu/nu 小鼠中耐受性良好,无肝细胞或肾毒性迹象。

Animal Model: BALB/c nu/nu mice (6-8-week-old female; subcutaneous lung cancer xenograft model)
Dosage: 20 mg/kg
Administration: i.p.; 3 doses (2 days and 5 days after first Pd-EV dose, third dose 2 days after second Pd-EV dose)
Result: Stopped tumor growth and temporarily reduced tumor size after the first treatment cycle.
Maintained significantly slower tumor growth rate than control groups for the duration of the study.
Reduced final tumor growth significantly relative to non-treated, pro-PTX-only, and Pd-EV-only control groups.
Animal Model: BALB/c nu/nu mice (6-8-week-old female)
Dosage: 10-20 mg/kg
Administration: i.p.; twice, separated by 3 days
Result: Exhibited weight evolution comparable to non-treated control mice.
Showed no significant differences in plasma levels of ALP, ALT, GGT, BA, ALB, BUN, and CHOL compared to non-treated control mice, with all values within established mouse reference intervals.

化学信息

分子量 1050.11
分子式 C56H63N3O17
CAS No. 3011748-20-9

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础