HDAC6-IN-44(compound H10)是一种选择性 HDAC6 抑制剂,IC50 值为 8.97 nM,能够抑制特发性肺纤化维表型并具有抗肺纤维化活性,在博来霉素诱导的肺纤维化小鼠模型中被验证可抑制肺纤维化进程且具有良好的代谢稳定性,有望用于特发性肺纤化领域研究。
HDAC6-IN-44
产品编号: MS-K56623 分子式: C20H21N3O3 分子量: 351.40
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

HDAC6-IN-44(compound H10)是一种选择性 HDAC6 抑制剂,IC50 值为 8.97 nM,能够抑制特发性肺纤化维表型并具有抗肺纤维化活性,在博来霉素诱导的肺纤维化小鼠模型中被验证可抑制肺纤维化进程且具有良好的代谢稳定性,有望用于特发性肺纤化领域研究。

生物实验数据

生物活性 HDAC6-IN-44 (compound H10) is a selective HDAC6 inhibitor with an IC50 value of 8.97 nM that inhibits the idiopathic pulmonary fibrosis phenotype and exhibits anti-pulmonary fibrosis activity, has been validated in a bleomycin-induced mouse model of pulmonary fibrosis to inhibit the progression of pulmonary fibrosis with favorable metabolic stability, and holds promise for research in the field of idiopathic pulmonary fibrosis.
IC50 & Target

HDAC6

8.97 nM (IC50)

HDAC1

878 nM (IC50)

HDAC2

3144 nM (IC50)

HDAC4

847 nM (IC50)

HDAC7

894 nM (IC50)

HDAC10

1319 nM (IC50)

HDAC11

>5000 nM (IC50)

体外研究
(In Vitro)

HDAC6-IN-44 (compound H10) (2.5-10 μM, 1-300 μM, 48 h) 以剂量依赖的方式抑制 TGF-β 诱导的 HELF 细胞增殖、细胞活力及其 HDAC6 活性,且未引起明显的细胞毒性效应。
HDAC6-IN-44 (2.5-10 μM, 48h) 通过作用于 HDAC6 相关信号通路干预 TGF-β1 相关的纤维化过程。

Cell Viability Assay

Cell Line: HELF cells
Concentration: 2.5-10 μM (cell proliferation test), 1-300 μM (survival toxicity test)
Incubation Time: 48 h
Result: Inhibited TGF-β-induced HELF cell proliferation without significantly inhibiting cell survival at a maximum concentration of approximately 10 μM.

Western Blot Analysis

Cell Line: HELF cells
Concentration: 2.5-10 μM
Incubation Time: 48 h
Result: Exhibited dose-dependent increase in acetylated α-tubulin expression and has no effect on histone H3 acetylation, while attenuating the elevated expression of all marker proteins induced by TGF-β1.
体内研究
(In Vivo)

HDAC6-IN-44 (compound H10) (0.1 mL/10g, 腹腔注射, 每日注射持续三周) 对肺纤维化小鼠模型中肺组织 HDAC6 活性增加及胶原沉积具有显著抑制作用。
HDAC6-IN-44 (0.1 mL/10g, 腹腔注射, 每日注射持续三周) 能够剂量依赖性地抑制肺纤维化小鼠模型的肺纤维化的进程。

Animal Model: Bleomycin-induced pulmonary fibrosis mouse model
Dosage: 0.1 mL/10g
Administration: Intraperitoneal injection (i.p.), daily for 3 weeks
Result: Caused the blue collagen fiber deposition to be spot-like, with the surrounding alveolar cavity slightly collapsed and the alveolar wall thickened, but the collagen fiber deposition was significantly less than that in the model group. Additionally, HDAC6-IN-44 could dose-dependently inhibit the expression of α-SMA and p-Smad2/3 in BLM-induced pulmonary fibrosis in mice.

化学信息

分子量 351.40
分子式 C20H21N3O3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础