Antifungal agent 22

Antifungal agent 22(compound D16)是一种潜在的口服有效抗真菌活性分子,IC50 值为 0.5 μg/mL,能穿透血脑屏障,通过破坏真菌细胞膜完整性杀死 C. neoformans H99 细胞,具有选择性抗隐球菌活性、代谢稳定性好且细胞毒性低。
产品编号: MS-G23805 CAS No.: 2640054-39-1 分子式: C21H26Cl3NOS 分子量: 446.86
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Antifungal agent 22(compound D16)是一种潜在的口服有效抗真菌活性分子,IC50 值为 0.5 μg/mL,能穿透血脑屏障,通过破坏真菌细胞膜完整性杀死 C. neoformans H99 细胞,具有选择性抗隐球菌活性、代谢稳定性好且细胞毒性低。

生物实验数据

生物活性 Antifungal agent 22 (compound D16) is a potentially orally effective antifungal molecule with an IC50 of 0.5 μg/mL that penetrates the blood-brain barrier, kills C. neoformans H99 cells by disrupting fungal cell membrane integrity, and exhibits selective anticryptococcal activity, good metabolic stability, and low cytotoxicity.
IC50 & Target

IC50: 0.5 μg/mL (Fungal).

体外研究
(In Vitro)

Antifungal agent 22 (compound D16) (0-1 μg/mL, 24 h) inhibits ergosterol biosynthesis, which results in stress-induced upregulation of ERG genes in C. neoformans H99.
Antifungal agent 22 (0-8 μg/mL) effectively inhibits the growth of C. neoformans H99 (0-72 h), inhibits the formation of C. neoformans H99 biofilms in a concentration-dependent manner (24 h).
Antifungal agent 22 (0-8 μg/mL, 48-72 h) shows selective anti-Cryptococcus activity, has a fungistatic effect.
Antifungal agent 22 (0-100 μM, 48 h) shows low cytotoxicity against a human HUVEC cell line with an IC50 of 20.18 μM.

Cell Proliferation Assay

Cell Line: C. neoformans H99 cells
Concentration: 0, 1, 2, 4, 8 μg/mL
Incubation Time: 0, 4, 8, 12, 24, 48, and 72 h
Result: Almost completely inhibited the growth of C. neoformans H99 at 8 μg/mL, remained at nearly 100% inhibition rate after 72 h, had minimum fungicidal concentrations of 8 μg/mL.

Cell Viability Assay

Cell Line: Fungal cells (RPMI 1640 medium)
Concentration: 0, 0.5, 1, 2, 4, 8 μg/mL
Incubation Time: 48, 72 h
Result: Showed selective anti-Cryptococcus activity, with IC50 range of 0.06-2 μg/mL and a MIC50 value (average IC50 values) of 0.62 μg/mL.
体内研究
(In Vivo)

Antifungal agent 22 (D16) (15 mg/kg, Intragastrically, daily for 5 days) shows potent anti-Cryptococcal efficacy.

Animal Model: ICR female mice (18-22 g, 4-6 weeks, tail vein injected with C. neoformans H99 cells)
Dosage: 15 mg/kg
Administration: Intragastrically, daily for 5 days
Result: Showed potent anti-Cryptococcal efficacy, significantly reduced the number of C. neoformans H99 cells in the brain after 5 days, prolong the median survival time (14 days) of the infected mice at a dose of 15 mg/kg.

化学信息

分子量 446.86
分子式 C21H26Cl3NOS
CAS No. 2640054-39-1

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

Antifungal agent 22 相关分类

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础