Fumonisin B3

Synonyms: 伏马菌素
Fumonisin B3 是一种具有口服活性的 Fumonisin 类真菌毒素,可从 Fusarium moniliforme、Fusarium proliferatum 和 Fusarium nygamai 中分离得到,能诱导癌前病变、引发鸡胚胚胎死亡并导致死亡鸡胚出现严重出血,可用于肝细胞癌的相关研究。
产品编号: MS-D88079 纯度: 99.51% CAS No.: 1422359-85-0 分子式: C34H59NO14 分子量: 705.83
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
100μg
询价
3-5 天
100µg
询价
3-5 天

产品描述

Fumonisin B3 是一种具有口服活性的 Fumonisin 类真菌毒素,可从 Fusarium moniliforme、Fusarium proliferatum 和 Fusarium nygamai 中分离得到,能诱导癌前病变、引发鸡胚胚胎死亡并导致死亡鸡胚出现严重出血,可用于肝细胞癌的相关研究。

生物实验数据

生物活性 Fumonisin B3 is an orally active Fumonisin-class mycotoxin that can be isolated from Fusarium moniliforme, Fusarium proliferatum, and Fusarium nygamai, induces precancerous lesions, causes chicken embryo mortality, and leads to severe hemorrhage in dead chicken embryos, and can be used for research related to hepatocellular carcinoma.
IC50 & Target

Fungal Metabolite

 

体内研究
(In Vivo)

Fumonisin B3 (饲料添加浓度 0.05-0.1%;每日给予;持续 15 至 20 天) 在大鼠肝脏中表现出致癌启动活性,可诱导 GGT+ 灶及后续的肝细胞结节,其活性与 Fumonisin B1 高度一致。
Fumonisin B3 (每枚鸡蛋 2-16 µg;气室注射;单次) 可诱导肉仔鸡胚胎出现剂量依赖性死亡,其中每枚鸡蛋给 16 µg 时死亡率为 14.6%,给 2 µg 时死亡率为 8.0%;还会导致死亡胚胎出现出血,但对存活胚胎无致畸作用。

Animal Model: strain not specified
Dosage: 0.05%; 0.1%
Administration: diet; daily; 15 to 20 days
Result: Induced gamma glutamyltranspeptidase positive (GGT+) foci in rat livers following 15 to 20 day dietary exposure.
Led to formation of hepatocyte nodules after subsequent AAF/PH treatment.
Closely mimicked the short-term toxic and cancer initiating effects of Fumonisin B1.
Animal Model: Peterson-Arbor Acres broiler embryos (72 h incubated prior to toxin injection)
Dosage: 2 µg per egg; 16 µg per egg
Administration: air cell injection; single dose
Result: Resulted in 8.0% cumulative embryonic mortality at 18 days of incubation, with no significant differences in hatchability and hatching weight compared to controls.
Resulted in 14.6% cumulative embryonic mortality at 18 days of incubation, which was significantly higher than control groups but not significantly different from the FB2 treatment group.
Caused all mortality within 7 days post-injection, with dead embryos showing severe hemorrhages in the back of the head, neck, and thoracic area.
Showed no gross developmental abnormalities and no significant difference in embryonic body weight compared to controls for surviving 18-day embryos.
性状 液体(密度:1.222 g/cm3)
颜色 Colorless to light yellow

化学信息

分子量 705.83
分子式 C34H59NO14
CAS No. 1422359-85-0
别名 伏马菌素

储存&溶解度

储存方式
Pure form -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础