Methyl aminolevulinate hydrochloride

Methyl aminolevulinate hydrochloride 是一种用于光动力疗法 (PDT) 的增敏剂 (sensitizer),可穿透皮肤并在细胞中诱导包括原卟啉 IX 在内的光活性卟啉生成,暴露于适宜光线时产生 ROS,引发细胞氧化和细胞死亡,同时通过表皮重建、细胞因子介导的真皮成纤维细胞活化、弹性蛋白分解、新胶原生成及毛细血管扩张血管压迫发挥光损伤逆转剂的作用,并可降低增殖标志物 Ki-67 和早期皮肤癌变标志物 TP53 的表达,延迟无毛小鼠中紫外线诱导的皮肤肿瘤发病时间并降低肿瘤负荷,因此可用于光化性角化病和基底细胞癌的相关研究。
产品编号: MS-F22614 纯度: 98.98% CAS No.: 79416-27-6 分子式: C6H12ClNO3 分子量: 181.62
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1g
询价
3-5 天
5g
询价
3-5 天
10g
询价
3-5 天
25g
询价
3-5 天
50g
询价
询价

产品描述

Methyl aminolevulinate hydrochloride 是一种用于光动力疗法 (PDT) 的增敏剂 (sensitizer),可穿透皮肤并在细胞中诱导包括原卟啉 IX 在内的光活性卟啉生成,暴露于适宜光线时产生 ROS,引发细胞氧化和细胞死亡,同时通过表皮重建、细胞因子介导的真皮成纤维细胞活化、弹性蛋白分解、新胶原生成及毛细血管扩张血管压迫发挥光损伤逆转剂的作用,并可降低增殖标志物 Ki-67 和早期皮肤癌变标志物 TP53 的表达,延迟无毛小鼠中紫外线诱导的皮肤肿瘤发病时间并降低肿瘤负荷,因此可用于光化性角化病和基底细胞癌的相关研究。

生物实验数据

生物活性 Methyl aminolevulinate hydrochloride is a sensitizer used in photodynamic therapy (PDT) that penetrates the skin and induces the production of photoactive porphyrins, including protoporphyrin IX, in cells; upon exposure to appropriate light, it generates ROS, causing cellular oxidation and cell death, and it acts as a photodamage reversal agent through epidermal reconstruction, cytokine-mediated dermal fibroblast activation, elastin degradation, neocollagenesis, and telangiectatic vascular compression, while also reducing the expression of the proliferation marker Ki-67 and the early skin carcinogenesis marker TP53, delaying the onset of ultraviolet-induced skin tumors and reducing tumor burden in hairless mice, and thus can be used in research related to actinic keratosis and basal cell carcinoma.
体外研究
(In Vitro)

Methyl aminolevulinate (0.0001-1.4 mmol/L) hydrochloride 可在小鼠腺癌 LM2 细胞培养物中诱导浓度依赖性的光活性卟啉生成,在 1.4 mmol/L 浓度下的生成量最高,达 48 ng/105 cells;且在所有测试浓度下,90%的卟啉均留存于细胞内。
Methyl aminolevulinate (1.2-1.8 mmol/L, 3 h) hydrochloride 在 1.8 mmol/L 浓度下对小鼠腺癌 LM2 细胞无固有细胞毒性,但以 1.2 mmol/L 处理 3 h 后再给予 3 J/cm2 光照时,可诱导 98%的细胞死亡。

Cell Cytotoxicity Assay

Cell Line: murine adenocarcinoma LM2 cell
Concentration: 1.8 mmol/L (intrinsic cytotoxicity); 1.2 mmol/L (photodynamic cytotoxicity)
Incubation Time: 3 h (photodynamic cytotoxicity)
Result: Showed no cytotoxicity to LM2 cells at 1.8 mmol/L when used alone.
Induced 98% cell death when used at 1.2 mmol/L for 3 h followed by irradiation with 3 J/cm2 light.
体内研究
(In Vivo)

Methyl aminolevulinate (8-20%;局部给药;每周一次;紫外线暴露小鼠给药 26 周;非紫外线暴露小鼠给药最长 36 周) hydrochloride 可显著延迟无毛小鼠中紫外线诱导的皮肤肿瘤发病时间并降低肿瘤负荷,在紫外线诱导的皮肤肿瘤中选择性聚集光活性卟啉。

Animal Model: Hairless mice (UV radiation-induced tumor model)
Dosage: 8-20%
Administration: topical; weekly; 26 weeks (UV-exposed mice); up to 36 weeks (non-UV-exposed mice)
Result: Delayed the appearance of UV-induced small tumors (AK or in situ SCC) by 2-3 weeks.
Delayed larger lesions (invasive SCC) by 5-7 weeks.
Caused an approximate 2- to 2.5-fold decrease in the number of UV-induced tumors per mouse after 26 weeks.
Significantly increased the tumor-free time on the methyl aminolevulinate-PDT side compared with the vehicle-PDT side in contralaterally treated mice.
Prevented tumor formation in non-UV-exposed mice treated for up to 36 weeks.
Induced higher levels of photoactive porphyrins (PAPs) in UV-induced tumors compared with normal skin of hairless mice.
Induced PAP formation only at the sites where it was applied.
Caused faster clearance of PAP than that formed by topical aminolevulinic acid.
性状 固体
颜色 White to off-white

化学信息

分子量 181.62
分子式 C6H12ClNO3
CAS No. 79416-27-6

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 2 mg/mL (11.01 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式

4°C, sealed storage, away from moisture

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

H2O 中的溶解度 : 100 mg/mL (550.60 mM; 超声助溶)

DMSO 中的溶解度 : 100 mg/mL (550.60 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
H2O / DMSO1 mM5.5060 mL27.5300 mL55.0600 mL137.6500 mL
5 mM1.1012 mL5.5060 mL11.0120 mL27.5300 mL
10 mM0.5506 mL2.7530 mL5.5060 mL13.7650 mL
15 mM0.3671 mL1.8353 mL3.6707 mL9.1767 mL
20 mM0.2753 mL1.3765 mL2.7530 mL6.8825 mL
25 mM0.2202 mL1.1012 mL2.2024 mL5.5060 mL
30 mM0.1835 mL0.9177 mL1.8353 mL4.5883 mL
40 mM0.1377 mL0.6883 mL1.3765 mL3.4413 mL
50 mM0.1101 mL0.5506 mL1.1012 mL2.7530 mL
60 mM0.0918 mL0.4588 mL0.9177 mL2.2942 mL
80 mM0.0688 mL0.3441 mL0.6883 mL1.7206 mL
100 mM0.0551 mL0.2753 mL0.5506 mL1.3765 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础