PLX647 dihydrochloride

PLX647 dihydrochloride 是一种具有口服活性且高度特异性的 FMS 和 KIT 双激酶抑制剂,IC50 分别为 28 和 16 nM,其在 1 μM 浓度下于 400 个激酶组中显示出对 FMS 和 KIT 的选择性,但 FLT3 和 KDR 除外(IC50 分别为 91 和 130 nM)。
产品编号: MS-F18693 CAS No.: 1779796-38-1 分子式: C21H19Cl2F3N4 分子量: 455.30
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PLX647 dihydrochloride 是一种具有口服活性且高度特异性的 FMS 和 KIT 双激酶抑制剂,IC50 分别为 28 和 16 nM,其在 1 μM 浓度下于 400 个激酶组中显示出对 FMS 和 KIT 的选择性,但 FLT3 和 KDR 除外(IC50 分别为 91 和 130 nM)。

生物实验数据

生物活性 PLX647 dihydrochloride is an orally active and highly specific dual kinase inhibitor of FMS and KIT with IC50 values of 28 and 16 nM, respectively, and at 1 μM it demonstrates selectivity for FMS and KIT across a panel of 400 kinases, except for FLT3 and KDR (IC50 = 91 and 130 nM).
体外研究
(In Vitro)

In vitro, PLX647 dihydrochloride potently inhibits proliferation of BCR-FMS cells, with an IC50 of 92 nM. A corresponding Ba/F3 cell line expressing BCR-KIT is also quite sensitive to PLX647 dihydrochloride, with an IC50 of 180 nM. PLX647 dihydrochloride also inhibits endogenous FMS and KIT, as demonstrated by inhibition of the ligand-dependent cell lines M-NFS-60 (IC50=380 nM) and M-07e (IC50=230 nM), which express FMS and KIT, respectively.
PLX647 dihydrochloride potently inhibits the growth of FLT3-ITD-expressing MV4-11 cells (IC50=110 nM). PLX647 dihydrochloride displays minimal inhibition of the proliferation of Ba/F3 cells expressing BCR-KDR (IC50=5 μM). PLX647 dihydrochloride inhibits osteoclast differentiation with an IC50 of 0.17 μM.

体内研究
(In Vivo)

PLX647 dihydrochloride (40 mg/kg; p.o.; twice daily for 7 days) reduces macrophage accumulation in UUO kidney and blood monocytes.
PLX647 dihydrochloride (40 mg/kg; p.o.; male Swiss Webster mice) reduces LPS-induced TNF-α and IL-6 release.
PLX647 dihydrochloride (20-80 mg/kg; p.o.; daily or twice daily from 27-41 days) shows effects on collagen-induced arthritis.
PLX647 dihydrochloride (30 mg/kg) results in significant inhibition of TRAP5b immunostaining and bone osteolysis. PLX647 dihydrochloride (30 mg/kg BID) is able to prevent bone damage by the tumor cells.

Animal Model: Male C57BL/6 mice (mouse unilateral ureter obstruction model)
Dosage: 40 mg/kg
Administration: P.o.; twice daily for 7 days
Result: Resulted in reduction in the levels of F4/80+ macrophages by 77%.
Animal Model: 7-9 wk old Male DBA/1J mice (Mouse collagen-induced arthritis model)
Dosage: 20 mg/kg, 80 mg/kg
Administration: P.o.; daily (20 mg/kg) from 27-41 days, twice daily (80 mg/kg) from 27-41 days
Result: 20 mg/kg PLX647 had no initial effect on the development of severe arthritis. However, starting on day 33, no further development of disease severity was recorded, and a 30% inhibition of the macroscopic signs of arthritis was evident in clinical score on day 41. Mice treated with 80 mg/kg BID PLX647 initially shows delayed development of severe arthritic signs. Starting on day 33, the signs of arthritis began to decrease in this treatment group, reaching a maximum reversal of 76% on day 41.

化学信息

分子量 455.30
分子式 C21H19Cl2F3N4
CAS No. 1779796-38-1

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础