STING Degrader-2

STING Degrader-2 是一种具有口服活性的 STING 降解剂,可促进不依赖蛋白酶体的 STING 降解,抑制 cGAMP 诱导的 STING 激活、STING 寡聚化以及 STING 和干扰素调节因子 3 (IRF3) 的磷酸化,并能在 cGAMP 诱导的自身免疫病小鼠模型中降低血清 IFN-β 和 CXCL-10 水平,因此可用于自身免疫病的研究。
STING Degrader-2
产品编号: MS-Z97498 分子式: C43H39FN4O8S 分子量: 790.86
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

STING Degrader-2 是一种具有口服活性的 STING 降解剂,可促进不依赖蛋白酶体的 STING 降解,抑制 cGAMP 诱导的 STING 激活、STING 寡聚化以及 STING 和干扰素调节因子 3 (IRF3) 的磷酸化,并能在 cGAMP 诱导的自身免疫病小鼠模型中降低血清 IFN-β 和 CXCL-10 水平,因此可用于自身免疫病的研究。

生物实验数据

生物活性 STING Degrader-2 is an orally active STING degrader that promotes proteasome-independent STING degradation, inhibits cGAMP-induced STING activation, STING oligomerization, and phosphorylation of STING and interferon regulatory factor 3 (IRF3), and reduces serum IFN-β and CXCL-10 levels in a cGAMP-induced mouse model of autoimmune disease, making it useful for the study of autoimmune diseases.
体外研究
(In Vitro)

STING Degrader-2 (compound SI-43) (6 h) 可抑制 cGAMP 诱导的 THP1-Blue ISG 细胞中 STING 的激活,其 IC50 为 0.11 μM。
STING Degrader-2 (1 μM;预处理 2 h 后 22 h) 通过不依赖蛋白酶体、依赖溶酶体的途径诱导 THP1 (STINGM155) 细胞中 STINGM155 的降解。
STING Degrader-2 (0.05-2.5 μM; 6 h) 可显著降低 THP1 细胞和骨髓来源巨噬细胞中 IFN-β 与 CXCL-10 的分泌水平。
STING Degrader-2 (0.1-1 μM; 6-9 h) 可抑制 cGAMP 诱导的 IRF3 和 STING 的磷酸化,以及 THP1-Blue ISG 细胞中 STING 的二聚化与寡聚化。
STING Degrader-2 (0.01-10 μM; 6-48 h) 可在 THP1 细胞中诱导突变体 STINGS154 和 STINGM155 降解,但不会影响 STINGR232 和 mSTING。

Western Blot Analysis

Cell Line: THP1-Blue ISG cells
Concentration: 0.1; 1 μM
Incubation Time: 6; 9 h
Result: Decreased cGAMP-induced
phosphorylation of IRF3 and STING.
Induced STING dimerization and oligomerization.

ELISA Assay

Cell Line: THP1 cells; BMDM
Concentration: 0.05; 0.5; 2.5 μM
Incubation Time: 6 h
Result: Significantly reduced IFN-β and CXCL-10 secretion in THP1 cells and BMDM isolated from mice, at 0.05 and 0.5 μM.

Western Blot Analysis

Cell Line: THP1 cells harboring STINGS154, STINGM155, STINGR232, or mSTING
Concentration: 0.01; 0.1; 0.5; 1; 5; 10 μM
Incubation Time: 6; 12; 24; 48 h
Result: Induced degradation of mutants STINGS154 and STINGM155, while sparing STINGR232 and mSTING in THP1 cells.
Demonstrated low inhibition activity against STINGM155 in THP1 cells.
体内研究
(In Vivo)

STING Degrader-2 (compound SI-43) (10-20 mg/kg;口服或皮下注射;单次给药) 在 cGAMP 诱导的自身免疫病小鼠模型中表现出体内药效。

Animal Model: C57BL/6 mice with cGAMP-induced autoimmune disease
Dosage: 20 mg/kg (p.o.); 10 mg/kg (s.c.)
Administration: p.o. or s.c.; single dose
Result: Significantly reduced cGAMP-induced serum IFN-β levels.
Significantly reduced cGAMP-induced serum CXCL-10 levels.

化学信息

分子量 790.86
分子式 C43H39FN4O8S

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础