PI3K/mTOR-IN-17

PI3K/mTOR-IN-17 是一种 PI3K 和 mTOR 双重抑制剂(对 PI3K 和 mTOR 的 IC50 值分别为 1.21 μM 和 0.21 μM),通过将细胞生长阻滞在 G1 期诱导 caspase 介导的细胞凋亡 (apoptosis),上调 caspases-3、7、8 和 9 的水平、p53 的表达以及 Bax/Bcl-2 比值,抑制 PI3K/mTOR 信号通路,并可用于癌症研究,如非小细胞肺癌 (NSCLC)。
PI3K/mTOR-IN-17
产品编号: MS-Z29825 分子式: C36H34N4O6 分子量: 618.68
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PI3K/mTOR-IN-17 是一种 PI3K 和 mTOR 双重抑制剂(对 PI3K 和 mTOR 的 IC50 值分别为 1.21 μM 和 0.21 μM),通过将细胞生长阻滞在 G1 期诱导 caspase 介导的细胞凋亡 (apoptosis),上调 caspases-3、7、8 和 9 的水平、p53 的表达以及 Bax/Bcl-2 比值,抑制 PI3K/mTOR 信号通路,并可用于癌症研究,如非小细胞肺癌 (NSCLC)。

生物实验数据

生物活性 PI3K/mTOR-IN-17 is a dual inhibitor of PI3K and mTOR (with IC50 values of 1.21 μM and 0.21 μM for PI3K and mTOR, respectively) that induces caspase-mediated apoptosis (apoptosis) by arresting cell growth at the G1 phase, upregulates the levels of caspases-3, 7, 8, and 9, the expression of p53, and the Bax/Bcl-2 ratio, inhibits the PI3K/mTOR signaling pathway, and can be used for cancer research, such as non-small cell lung cancer (NSCLC).
IC50 & Target

PI3K

1.21 μM (IC50)

mTOR

0.21 μM (IC50)

Caspase 3

 

Caspase-7

 

Caspase-8

 

Caspase-9

 

Bax

 

Bcl-2

 

体外研究
(In Vitro)

PI3K/mTOR-IN-17 (Compound 8) 显示出优异的细胞毒性,对肺成纤维细胞 WI-38 的 IC50 值为 21.13 μM,对 A549 细胞的 IC50 值为 1.39 μM,选择性指数为 15.32。

PI3K/mTOR-IN-17 (1.39 μM, 48 h) 可上调 A549 细胞中 p53 和 Bax 的水平,并下调 Bcl-2、EGFR、PI3K 和 mTOR 的水平。

PI3K/mTOR-IN-17 (1.39 μM, 48 h) 可上调 A549 细胞中启动型 caspase-8 和 9 的水平,以及执行型 caspase-3 和 7 的水平。

PI3K/mTOR-IN-17 (1.39 μM, 48 h) 通过将 A549 细胞生长阻滞在 G1 期,显著诱导细胞凋亡。

Real Time qPCR

Cell Line: A549 lung cancer cells
Concentration: 1.39 μM
Incubation Time: 48 h
Result: Significantly increased the expression of p53 by 8.38 folds Bax by 9.88 fold and downregulated the leves of Bcl-2 by 0.45 fold.
Suppressed gene expression of EGFR by 0.42 fold, PI3K by 0.45 fold, and mTOR by 0.58 fold.

Apoptosis Analysis

Cell Line: A549 lung cancer cells
Concentration: 1.39 μM
Incubation Time: 48 h
Result: Significantly increased the overall death rate by 21 fold.
Total apoptosis reached 25.03% (19.38% late apoptosis, 5.65% early apoptosis) compared to 1.19% in the untreated control group.
Markedly increased the cell population in the G1-phase to 80.2% compared to 57.3% in the control, and reduced the proportions of cells in the S and G2/M phases.

ELISA Assay

Cell Line: A549 lung cancer cells
Concentration: 1.39 μM
Incubation Time: 48 h
Result: Upregulated the initiator caspase-8 and 9 levels by almost 2.2 and 1.03 fold and the executioner caspases-3 and 7 by 1.73 and 1.34 fold.

化学信息

分子量 618.68
分子式 C36H34N4O6

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础