Ningnanmycin 是一种植物抗病毒剂,它可结合 TMV CP 圆盘上的特定残基,抑制 CP 组装,将 CP 圆盘拆解为单体,并破坏 TMV CP 圆盘的结构以降低致病性,同时可结合 PVY CP 的关键氨基酸,干扰 CP-CP 相互作用,抑制 CP 组装和病毒颗粒形成,并阻断 PVY 复制,还可诱导抗病毒响应基因 PRXIIB、PRXIIE、PUB4 和 PER42 的表达,从而激活宿主防御系统,因此可用于烟草花叶病毒感染和马铃薯 Y 病毒感染的相关研究。
产品编号: MS-Y60866 CAS No.: 156410-09-2 分子式: C16H25N7O8 分子量: 443.41
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Ningnanmycin 是一种植物抗病毒剂,它可结合 TMV CP 圆盘上的特定残基,抑制 CP 组装,将 CP 圆盘拆解为单体,并破坏 TMV CP 圆盘的结构以降低致病性,同时可结合 PVY CP 的关键氨基酸,干扰 CP-CP 相互作用,抑制 CP 组装和病毒颗粒形成,并阻断 PVY 复制,还可诱导抗病毒响应基因 PRXIIB、PRXIIE、PUB4 和 PER42 的表达,从而激活宿主防御系统,因此可用于烟草花叶病毒感染和马铃薯 Y 病毒感染的相关研究。

生物实验数据

生物活性 Ningnanmycin is a plant antiviral agent that binds to specific residues on the TMV CP disk, inhibits CP assembly, disassembles the CP disk into monomers, and disrupts the structure of the TMV CP disk to reduce pathogenicity; it also binds to key amino acids of PVY CP, interferes with CP-CP interactions, inhibits CP assembly and virion formation, and blocks PVY replication, while inducing the expression of antiviral response genes PRXIIB, PRXIIE, PUB4, and PER42 to activate the host defense system, and can therefore be used in research related to tobacco mosaic virus infection and potato virus Y infection.
体外研究
(In Vitro)

Ningnanmycin 对 TMV CP 四层聚集圆盘的亲和力最高 (Kd 1.10-3.96 μM),其次是 TMV RNA (Kd 16.5 μM)、TMV CP 单体 (Kd 18.6 μM) 和 TMV 颗粒 (Kd 25.8-52.3 μM)。
Ningnanmycin (1:5、1:20 衣壳蛋白圆盘:Ningnanmycin 分子比例) 可剂量依赖性地将重组型和野生型 TMV CP 四层聚集圆盘拆解为单体,当比例为 1:20 时可实现完全拆解。
Ningnanmycin (突变 CP 圆盘与 Ningnanmycin 分子比例为 1:20;20°C) 的结合亲和力 (20°C 时突变体圆盘的 Kd 为 43.5 μM,野生型圆盘的 Kd 为 1.10 μM) 以及诱导 CP 圆盘解聚的能力,会因 TMV CP 残基 Ser15、Ser49、Arg71 和 Tyr72 的突变而显著降低。
Ningnanmycin 可与纯化的野生型 PVY 外壳蛋白结合,通过 MST、ITC 测得其解离常数为 2.24、1.34 μM。
Ningnanmycin (0.5 mg/mL;喷雾处理;24 -96 h;溶液漂浮处理;48 h) 可抑制 Nicotiana tabacum cv. K326 中 TMV 外壳蛋白的复制,处理 72 h 后可完全清除可检测到的 CP。
Ningnanmycin (500 μg/mL;喷雾处理;接种后 24 h 和 72 h 各处理 1 次) 可显著 Nicotiana benthamiana 中的马铃薯 Y 病毒感染,抑制马铃薯 Y 病毒的复制,Y 病毒外壳蛋白的聚合,增强防御酶活性,升高 SOD、POD 和 CAT 水平。

Western Blot Analysis

Cell Line: Nicotiana tabacum cv. K326
Concentration: 0.5 mg/mL
Incubation Time: spray; 24 h, 72 h, or 96 h; float on solution; 48 h
Result: Reduced TMV coat protein (CP) levels after 48-hour leaf disc treatment.
Weakened TMV CP bands after 24-hour spray treatment.
Eliminated detectable TMV CP after 72-hour spray treatment.

RT-PCR

Cell Line: Nicotiana benthamiana
Concentration: 500 μg/mL
Incubation Time: spray; twice at 24 and 72 hours postinoculation
Result: Reduced relative PVY-GFP transcript levels to ~0.9, ~0.8, and ~0.6 at 3, 7, and 9 days postinoculation respectively compared to mock and ribavirin-treated controls.
Reduced relative ΔPVY-GFP transcript levels to ~0.2, ~0.3, and ~0.2 at 3, 7, and 9 days postinoculation respectively compared to mock controls.

Western Blot Analysis

Cell Line: Nicotiana benthamiana
Concentration: 500 μg/mL
Incubation Time: spray; twice at 24 and 72 hours postinoculation
Result: Decreased PVY-GFP protein levels gradually over time, while levels increased in mock-treated plants.

Immunofluorescence

Cell Line: Nicotiana benthamiana
Concentration: 500 μg/mL
Incubation Time: spray; twice at 24 and 72 hours postinoculation
Result: Diminished GFP fluorescence, indicating inhibited CP-CP interactions, compared to bright fluorescence in mock and ribavirin-treated plants.

化学信息

分子量 443.41
分子式 C16H25N7O8
CAS No. 156410-09-2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础