Antibiofilm agent-22

Antibiofilm agent-22 是一种靶向 FpvA 受体的抑菌剂,可通过螯合铁破坏 las、pqs 和 rhl 通路,降低弹性蛋白酶、绿脓菌素和鼠李糖脂的产生并诱导细菌铁饥饿,从而用于铜绿假单胞菌 (Pseudomonas aeruginosa) 感染的研究。
Antibiofilm agent-22
产品编号: MS-Y13959 分子式: C22H38N2O5 分子量: 410.55
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Antibiofilm agent-22 是一种靶向 FpvA 受体的抑菌剂,可通过螯合铁破坏 las、pqs 和 rhl 通路,降低弹性蛋白酶、绿脓菌素和鼠李糖脂的产生并诱导细菌铁饥饿,从而用于铜绿假单胞菌 (Pseudomonas aeruginosa) 感染的研究。

生物实验数据

生物活性 Antibiofilm agent-22 is an antibacterial agent targeting the FpvA receptor that chelates iron, disrupts the las, pqs, and rhl pathways, reduces the production of elastase, pyocyanin, and rhamnolipids, and induces bacterial iron starvation, thereby making it useful for research on Pseudomonas aeruginosa infections.
体外研究
(In Vitro)

Antibiofilm agent-22 (Compound 5j) 可强效抑制 Pseudomonas aeruginosa PAO1 的生物膜形成,且无直接杀菌活性,其 IC50 为 2.66 μM。
Antibiofilm agent-22 (1.25-20 μM;过夜) 以浓度依赖的方式抑制 Pseudomonas aeruginosa PAO1 的生物膜形成。
Antibiofilm agent-22 (1.25-20 μM) 可显著且呈浓度依赖性地降低 Pseudomonas aeruginosa PAO1 中弹性蛋白酶、绿脓菌素和鼠李糖脂的产生,在 20 μM 时抑制作用达到最强。
Antibiofilm agent-22 (1.25-20 μM;24 小时) 可抑制 Pseudomonas aeruginosa PAO1 中的 las、pqs 和 rhl 群体感应系统,且不会影响 GFP 蛋白表达或细菌生长。
Antibiofilm agent-22 (1.25-20 μM) 是一种强效铁螯合剂 (pFe (III) = 22.99),可通过诱导铁饥饿,以浓度依赖的方式增强 Pseudomonas aeruginosa PAO1 中脓菌素和绿脓菌素的产生。
Antibiofilm agent-22 (24 小时) 可通过转录组失调破坏 Pseudomonas aeruginosa PAO1 的铁稳态,并损害生物膜形成的关键过程 (包括菌毛组装)。
Antibiofilm agent-22 及其 Fe3+ 二聚体对 Pseudomonas aeruginosa FpvA 受体表现出强而稳定的结合亲和力,可与天然绿脓菌素竞争以破坏铁摄取过程。
Antibiofilm agent-22 (1.25-20 μM) 以浓度依赖方式抑制铜绿假单胞菌 PAO1 的群集运动 (20 μM 时抑制率达 78%),并诱导细胞质空泡化和细胞膜变薄,但无直接杀菌活性。
Antibiofilm agent-22 与 Tobramycin (MS-F77565) 协同作用于 Pseudomonas aeruginosa PAO1,可使 Tobramycin 的 MIC 降低 32 倍 (FICI = 0.078)。
Antibiofilm agent-22 (3.125-50 μM) 在最高达 50 μM 的浓度下对兔红细胞无显著溶血活性。
Antibiofilm agent-22 (6.25-100 μM;24 小时) 在孵育 24 小时后,浓度高达 100 μM 时对 RAW 264.7、HSC 或 293T 细胞均无显著细胞毒性。

Cell Cytotoxicity Assay

Cell Line: RAW 264.7 macrophages, human hepatic stellate cells (HSCs), human embryonic kidney 293T cells
Concentration: 6.25 μM; 12.5 μM; 25 μM; 50 μM; 100 μM
Incubation Time: 24 h
Result: Did not exhibit significant cytotoxicity to any of the three cell types at concentrations up to 100 μM.
体内研究
(In Vivo)

Antibiofilm agent-22 (Compound 5j) (25 μM;局部处理;每天给药,持续 3 天或 9 天) 与 Tobramycin sulfate (MS-L17126) 联用可几乎完全清除小鼠 P. aeruginosa 感染模型中的伤口细菌。

Animal Model: ICR (male, 3-4 weeks old, P. aeruginosa single-species
infection model)
Dosage: 25 μM; 25 μM plus Tobramycin sulfate
Administration: topical; daily for 3 or 9 days
Result: Did not adversely affect mouse body weight, indicating favorable biosafety at the tested concentration.
Showed no statistically significant difference in wound bacterial load compared to the infection control group.
Achieved near-complete bacterial clearance from the wounds.

化学信息

分子量 410.55
分子式 C22H38N2O5

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础