SYL3C aptamer sodium

SYL3C aptamer sodium 是一种靶向 EpCAM 的 DNA 核酸适配体,可靶向多种癌细胞系,并可用于靶向癌细胞成像和循环肿瘤细胞检测。
SYL3C aptamer sodium
产品编号: MS-Y13790 纯度: 95.31% 分子量: 14838.5 (free acid)
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

SYL3C aptamer sodium 是一种靶向 EpCAM 的 DNA 核酸适配体,可靶向多种癌细胞系,并可用于靶向癌细胞成像和循环肿瘤细胞检测。

生物实验数据

生物活性 SYL3C aptamer sodium is a DNA aptamer targeting EpCAM that targets multiple cancer cell lines and can be used for targeted cancer cell imaging and circulating tumor cell detection.
IC50 & Target

Epithelial cell adhesion molecule (EpCAM)

体外研究
(In Vitro)

SYL3C aptamer (不同浓度;37 °C 下作用 30 min) sodium 可与乳腺癌 MDA-MB-231 细胞结合,其 Kd 值为 38 nM;还可与胃癌 Kato III 细胞结合,Kd 值为 67 nM,结合亲和力强于全长 SYL3 aptamer。
SYL3C aptamer (流式细胞术处理 30 min,共聚焦成像处理 40 min,浓度 200 nM) sodium 可特异性结合 EpCAM 阳性癌细胞系 (MDA-MB-231, Kato III, HT-29, T47D, SW480),而不结合 EpCAM 阴性癌细胞系 (HEK-293T, U118MG, Ramos)。
SYL3C aptamer (4℃ 条件下处理 40 min,浓度 200 nM) 可选择性标记 EpCAM 阳性的乳腺癌 MDA-MB-231 细胞和胃癌 Kato III 细胞以用于荧光成像,而对 EpCAM 阴性的胚肾 HEK-293T 细胞无可见标记。
SYL3C aptamer (细胞孵育 30 min) sodium 固定于固体表面时,捕获胃癌 Kato III 细胞的效率最高可达 63%,纯度达 80%,且对 EpCAM 阴性 Ramos 细胞的非特异性捕获极少。

Cell Cytotoxicity Assay

Cell Line: HT-29, HEK293, CHO cells
Concentration: 25 nM, 50 nM, 100 nM, 250 nM, 500 nM, 1 μM
Incubation Time: 24 h
Result: Maintained cell viability above 80% across all tested concentrations and cell lines after 24-hour incubation.
体内研究
(In Vivo)

Cy7-SYL3C (经尾静脉单次注射,静脉给予) sodium 可通过肾脏代谢实现 EpCAM 阳性结直肠癌异种移植物的靶向近红外荧光成像;与 DNA 四面体偶联形成的 Cy7-DTN-SYL3C (经尾静脉单次注射,静脉给予) 可延长循环时间,在 24 小时内使肿瘤摄取量翻倍,将肿瘤与背景信号比提升至 3.05,同时维持对 EpCAM 的特异性结合。
DTN-SYL3C (0.02 mg/kg;静脉注射;单次尾静脉注射) sodium 在健康 BALB/c 小鼠中具有生物相容性,给药 24 小时后未对主要器官造成可观察到的损伤。

Animal Model: BALB/c Nude (female, 5-6 weeks old, subcutaneous colorectal cancer xenograft model)
Dosage: 1 nM (Cy7-SYL3C); 1 nM (Cy7-DTN-SYL3C)
Administration: i.v.; single tail vein injection
Result: Exhibited primary renal metabolism, with fluorescence signals localized in the liver and kidneys for the first 4 hours, then concentrated in the kidneys with decreasing intensity over time.
Showed enhanced, prolonged fluorescence signals at the tumor site, confirming specific binding to EpCAM.
Had kidney fluorescence intensity 1.8 to 2 times higher than Cy7-SYL3C from 2 to 24 hours (statistically significant), indicating prolonged circulation time.
Had tumor fluorescence intensity twice as high as Cy7-SYL3C over 24 hours.
Displayed a dispersed dot-like binding pattern in tumor tissue with a Pearson’s coefficient of 0.32 against EpCAM (Cy5-SYL3C).
Animal Model: BALB/c (6-7 weeks old, healthy)
Dosage: 0.02 mg/kg (equivalent to 1 nM)
Administration: i.v.; single tail vein injection
Result: Showed no significant differences in H&E staining of major organs compared to the PBS control group, with no evident tissue damage observed.
性状 固体
颜色 White to off-white

化学信息

分子量 14838.5 (free acid)

储存&溶解度

储存方式

-20°C, sealed storage, away from moisture

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础