TLR7/8 agonist 13

TLR7/8 agonist 13 是一种具有口服活性的 TLR7(最低有效浓度 (LEC) [hTLR7] = 1.6 μM)和 TLR8(LEC [hTLR8] = 1.6 μM)双重激动剂,对人外周血单核细胞 (hPBMC) 具有激动活性 (LEC [hPBMC] = 0.5 μM),可在小鼠和食蟹猴体内诱导内源性 IFNα,激活髓系树突状细胞和单核细胞并使其向 TH1 表型转变,在慢性 AAV-HBV 小鼠模型中降低病毒载量和 HBV 表面抗原,并具有间接诱导 IFNγ 的潜力,可促进 HBV 抗原特异性 CD8 T 细胞介导的应答的产生,因此可用于研究乙型肝炎病毒。
产品编号: MS-Y06728 CAS No.: 1402802-45-2 分子式: C12H22N4O2 分子量: 254.33
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

TLR7/8 agonist 13 是一种具有口服活性的 TLR7(最低有效浓度 (LEC) [hTLR7] = 1.6 μM)和 TLR8(LEC [hTLR8] = 1.6 μM)双重激动剂,对人外周血单核细胞 (hPBMC) 具有激动活性 (LEC [hPBMC] = 0.5 μM),可在小鼠和食蟹猴体内诱导内源性 IFNα,激活髓系树突状细胞和单核细胞并使其向 TH1 表型转变,在慢性 AAV-HBV 小鼠模型中降低病毒载量和 HBV 表面抗原,并具有间接诱导 IFNγ 的潜力,可促进 HBV 抗原特异性 CD8 T 细胞介导的应答的产生,因此可用于研究乙型肝炎病毒。

生物实验数据

生物活性 TLR7/8 agonist 13 is an orally active dual agonist of TLR7 (lowest effective concentration (LEC) [hTLR7] = 1.6 μM) and TLR8 (LEC [hTLR8] = 1.6 μM) that exhibits agonist activity against human peripheral blood mononuclear cells (hPBMC) (LEC [hPBMC] = 0.5 μM), induces endogenous IFNα in mice and cynomolgus monkeys, activates myeloid dendritic cells and monocytes and shifts them toward a TH1 phenotype, reduces viral load and HBV surface antigen in a chronic AAV-HBV mouse model, and has the potential to indirectly induce IFNγ, thereby promoting the generation of HBV antigen-specific CD8 T cell-mediated responses, and can therefore be used for research on hepatitis B virus.
IC50 & Target

human TLR7

 

TLR8

 

体外研究
(In Vitro)

TLR7/8 agonist 13 (Compound 50 d) 诱导 PBMCs 产生 IFNα、IFNγ、IL-12p40、IL-12p70 和 TNF-α。

体内研究
(In Vivo)

TLR7/8 agonist 13 (Compound 50 d) (1-50 mg/kg,口服,一次) 在 C57Bl/6 小鼠模型中诱导 IFNα、TH1 和髓系应答。
TLR7/8 agonist 13 (5 mg/kg,口服,每周一次,8 周) 通过两种不同的非细胞毒性机制在 AAV-HBV C57Bl/6 小鼠模型中抑制 HBsAg 分泌和 HBV 病毒载量。
TLR7/8 agonist 13 (3-30 mg/kg,口服,一次) 在食蟹猴中诱导内源性 IFNα,同时激活髓系树突状细胞和单核细胞,使其向 TH1 表型发展。

Animal Model: C57Bl/6 mice model
Dosage: 1, 5, 10, and 50 mg/kg
Administration: p.o. once
Result: Induced IFNα at low dose as well as TH1 and myeloid responses at higher doses.
Animal Model: AAV-HBV C57Bl/6 mice model
Dosage: 5 mg/kg
Administration: p.o., once a week, 8 weeks
Result: Decreased HBsAg levels by 2.4 log at the end of the dosing period, decreased the percent of HBsAg hepatocytes, decreased HBV viral load in the serum, had no decrease in liver HBV RNA levels nor in the percent of HBcAg hepatocytes.
Increased serum anti-HBsAg antibody levels.
Animal Model: Cynomolgus monkeys model
Dosage: 3, 9, and 30 mg/kg
Administration: p.o., once
Result: Had no change of clinical observations and body weight, body temperature, clinical pathology.
Induced IFNα production from the 9 mg/kg dose, induced an ISG response and CXCL10 from a lower dose than IFNα, i.e., 3 mg/kg.
Up-regulated Isg15 and Mx1, activated monocytes, IL-15 from 9 mg/kg, activated Myeloid dendritic cells, MCP1, MIP-1β, and IL-1Ra from 3 to 9 mg/kg, activated TNFα and IL-6 from 30 mg/kg.

化学信息

分子量 254.33
分子式 C12H22N4O2
CAS No. 1402802-45-2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础