Akt3 degrader 1

Akt3 degrader 1(化合物 12l)是一种选择性 Akt3 降解剂,可克服 Osimertinib (MS-Q22788) 诱导的 H1975OR NSCLC 细胞耐药性,并具有抗增殖活性,能显著抑制小鼠体内肿瘤生长,可用于耐药性非小细胞肺癌的研究。
产品编号: MS-X57793 纯度: 95.10% CAS No.: 2836342-69-7 分子式: C53H72N8O4 分子量: 885.19
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

Akt3 degrader 1(化合物 12l)是一种选择性 Akt3 降解剂,可克服 Osimertinib (MS-Q22788) 诱导的 H1975OR NSCLC 细胞耐药性,并具有抗增殖活性,能显著抑制小鼠体内肿瘤生长,可用于耐药性非小细胞肺癌的研究。

生物实验数据

生物活性 Akt3 degrader 1 (compound 12l) is a selective Akt3 degrader that overcomes Osimertinib (MS-Q22788)-induced resistance in H1975OR NSCLC cells, exhibits antiproliferative activity, significantly inhibits tumor growth in mice, and can be used for research on drug-resistant non-small cell lung cancer.
IC50 & Target

Akt3.

体外研究
(In Vitro)

Akt3 degrader 1 (0.001-100 μM; 24 h) shows antiproliferative effects on H1975OR cells with an IC50 of 0.972 μM.
Akt3 degrader 1 (1.6, 8, 40, 200, 1000 nM; 24 h) induces degradation of Akt3 through the ubiquitin proteasome-mediated proteolysis process in NSCLC cell lines.
Akt3 degrader 1 (10, 100 nM) selectively and dose-dependently degrades exogenous PH domain-only Akt3 protein but not the Akt3 del PH mutant in H1975OR cells.
Akt3 degrader 1 overcomes osimertinib-induced resistance in H1975OR NSCLC cells via disrupting the noncatalytic functions of Akt3.

Cell Proliferation Assay

Cell Line: H1975OR cells
Concentration: 0.001-100 µM
Incubation Time: 24 h
Result: Inhibited growth of H1975OR cells with an IC50 of 0.972 µM.

Western Blot Analysis

Cell Line: A549, HCC827, H1975, H1975OR, PC9, H1299, and H460 cells
Concentration: 1.6, 8, 40, 200, 1000 nM
Incubation Time: 24 h
Result: Selectively induced Akt3 degradation in all of these cell lines in a dose-dependent manner, whereas had minimal influence on Akt1 and Akt2 protein levels.
体内研究
(In Vivo)

Akt3 degrader 1 (10, 20 mg/kg; i.p.; every 3 days for 5 weeks) induces significant tumor growth inhibition (TGI) with an approximately TGI value of 75% in mice.

Animal Model: NOD-SCID-IL2Rg-/-(NSI) mice (H1975OR xenograft model).
Dosage: 10, 20 mg/kg
Administration: Intraperitoneal administration; every 3 days for 5 weeks
Result: Inhibited tumor growth without causing obvious body weight loss or other signs of toxicity.
性状 固体
颜色 Light yellow to yellow

化学信息

分子量 885.19
分子式 C53H72N8O4
CAS No. 2836342-69-7

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.

Akt3 degrader 1 相关分类

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础