SYN1436 是一种人新生儿 Fc 受体 (hFcRn) 选择性拮抗剂,IC50 为 2.4 nM,可通过结合 hFcRn 抑制 hFcRn-hIgG 相互作用,并可用于自身免疫性疾病的研究。
产品编号: MS-W85011 CAS No.: 947545-69-9 分子式: C144H200N38O32S4 分子量: 3103.62
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

SYN1436 是一种人新生儿 Fc 受体 (hFcRn) 选择性拮抗剂,IC50 为 2.4 nM,可通过结合 hFcRn 抑制 hFcRn-hIgG 相互作用,并可用于自身免疫性疾病的研究。

生物实验数据

生物活性 SYN1436 is a selective antagonist of human neonatal Fc receptor (hFcRn) with an IC50 of 2.4 nM that binds to hFcRn to inhibit hFcRn-hIgG interaction and can be used for research on autoimmune diseases.
体外研究
(In Vitro)

SYN1436 (2.4 nM;2 小时) 在 pH 6 条件下的 ELISA 实验中强效抑制 hIgG-shFcRn 相互作用,其 IC50 为 2.4 nM。
SYN1436 (2.8 nM;1小时) 在 pH 6 条件下的 FACS 竞争实验中可强效抑制 hIgG 与表达 hFcRn 的 293c11 细胞的结合,其 IC50 为 2.8 nM。
SYN1436 (0.04-20 nM) 可在 pH 6 和 pH 7.4 条件下以极高亲和力结合固定化 shFcRn,其 Kd 值分别 <0.5 nM 和 <0.8 nM。
SYN1436 在 10 μM 浓度下,于 pH 6 条件下不会抑制 shFcRn-HSA 相互作用;且在 pH 6 或 pH 7.4 条件下,浓度高达 100 μM 时也不会与 HSA 直接结合。

体内研究
(In Vivo)

SYN1436 (0.5-10 mg/kg;静脉注射;每日 1 次;连续 4 天) 以剂量依赖的方式增强人 FcRn 转基因小鼠体内的 hIgG 分解代谢,其中 10 mg/kg 剂量可使 hIgG 水平降低 90%,并将 hIgG 的半衰期缩短至 34 小时。
SYN1436 (1-5 mg/kg;皮下注射或静脉注射;每周 1 次或每周 3 次;最长 4 周) 可剂量依赖性降低食蟹猴的内源性血清 IgG 水平,且不改变白蛋白、IgM 或 IgA 水平。

Animal Model: TG32B (muFcRn -/-, muβ2m -/-, huFcRn +/+, huβ2m +/+ transgenic strain)
Dosage: 0.5 mg/kg; 1 mg/kg; 2.5 mg/kg; 5 mg/kg; 10 mg/kg
Administration: i.v.; once daily; 4 days
Result: Reduced serum hIgG levels in a dose-dependent manner at 120 h.
Reduced hIgG levels by 90% compared to vehicle control at 10 mg/kg dose.
Shortened the serum half-life of hIgG from 114 h (vehicle control) to 34 h at 10 mg/kg dose.
Animal Model: Cynomolgus monkeys (average body weight 4.2 kg)
Dosage: 1 mg/kg; 5 mg/kg
Administration: s.c. (once weekly for 4 doses or three times weekly for 12 doses); i.v. (three times weekly for 12 doses or three times weekly for 7 doses); up to 4 weeks
Result: Reduced serum IgG by ~30% over 4 weeks with weekly s.c. dosing of 1 mg/kg.
Reduced serum IgG by 60% over 4 weeks with three-times-weekly s.c. or i.v. dosing of 1 mg/kg.
Reduced serum IgG by ~50% over 4 weeks with weekly s.c. dosing of 5 mg/kg.
Reduced serum IgG by 60% over 4 weeks with three-times-weekly s.c. dosing of 5 mg/kg.
Reduced serum IgG by up to 80% after 2.5 weeks of treatment with three-times-weekly i.v. dosing of 5 mg/kg.
Restored serum IgG levels to pretreatment or near-pretreatment levels after treatment cessation.
Had no effect on serum albumin, IgM, or IgA concentrations, with levels remaining within ~20% of predose values.

化学信息

分子量 3103.62
分子式 C144H200N38O32S4
CAS No. 947545-69-9

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础