FXR antagonist 4

FXR antagonist 4 (Compound 4l) 是一种具有口服活性、选择性的 FXR 拮抗剂,其 IC50 为 0.70 μM,可与 FXR 结合,差异性调控胆汁酸和脂质转运蛋白基因,且不影响糖异生相关基因,而 FXR modulator 1 可激活 AMPK 信号通路以抑制脂肪酸合成,减轻肝脂肪变性、气球样变和纤维化,并改善血脂异常,因此可用于代谢功能障碍相关脂肪性肝炎的研究。
FXR antagonist 4
产品编号: MS-W65994 分子式: C25H20O6 分子量: 416.42
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

FXR antagonist 4 (Compound 4l) 是一种具有口服活性、选择性的 FXR 拮抗剂,其 IC50 为 0.70 μM,可与 FXR 结合,差异性调控胆汁酸和脂质转运蛋白基因,且不影响糖异生相关基因,而 FXR modulator 1 可激活 AMPK 信号通路以抑制脂肪酸合成,减轻肝脂肪变性、气球样变和纤维化,并改善血脂异常,因此可用于代谢功能障碍相关脂肪性肝炎的研究。

生物实验数据

生物活性 FXR antagonist 4 (Compound 4l) is an orally active and selective FXR antagonist with an IC50 of 0.70 μM that binds to FXR and differentially regulates bile acid and lipid transporter genes without affecting gluconeogenesis-related genes, whereas FXR modulator 1 activates the AMPK signaling pathway to inhibit fatty acid synthesis, alleviates hepatic steatosis, ballooning degeneration, and fibrosis, and improves dyslipidemia, and can therefore be used for the study of metabolic dysfunction-associated steatohepatitis.
体外研究
(In Vitro)

FXR modulator 1 可强效抑制 HEK293T 细胞中 CDCA 诱导的 FXR 激活,其 IC50 为 0.70 μM。
FXR modulator 1 (10 μM) 可强效破坏 CDCA 诱导的 SRC1-2 共激活因子肽向纯化 FXR-LBD 的募集,抑制率超过 90%。
FXR modulator 1 (1-10 μM; 24 h) 在 HepG2 细胞中作为选择性 FXR 调节剂,可剂量依赖性调控胆汁酸和脂质代谢基因 (SHP、BSEP、SREBP-1c、CYP7A1),且不影响糖异生基因 (PEPCK、G6Pase)。
FXR modulator 1 (2-10 μM) 以剂量依赖方式激活培养细胞中的 AMPK-ACC 通路,提高 AMPK 和 ACC 的磷酸化水平。

Real Time qPCR

Cell Line: HepG2 cells
Concentration: 1-10 μM
Incubation Time: 24 h
Result: Downregulated mRNA levels of SHP, BSEP, and SREBP-1c when administered alone or with CDCA, completely reversing CDCA-induced SREBP-1c induction at 10 μM.
Dose-dependently upregulated CYP7A1 mRNA levels compared to vehicle control, both alone and with CDCA.
Showed no significant effects on gluconeogenic genes PEPCK and G6Pase, either alone or in combination with CDCA.
体内研究
(In Vivo)

FXR modulator 1 (25-100 mg/kg;口服;每日;12 周) 可剂量依赖性地改善 CDA-HFD 诱导的 MASH 小鼠的肝脂肪变性、气球样变、纤维化和血脂异常,其中 100 mg/kg 剂量可使脂质参数恢复至接近正常水平,并将 NAS 总评分降至 2.2。

Animal Model: C57BL/6 (male, MASH induced by CDA-HFD feeding for 3 weeks prior to treatment)
Dosage: 25 mg/kg; 50 mg/kg; 100 mg/kg
Administration: p.o.; daily; 12 weeks
Result: Dose-dependently reduced elevated alanine transaminase (ALT), aspartate transaminase (AST), triglycerides (TG), total cholesterol (TC), low-density lipoprotein (LDL-C), and hepatic hydroxyproline (Hyp) levels, while increasing high-density lipoprotein (HDL-C) levels; the 100 mg/kg dose restored lipid parameters to near-normal levels.
Dose-dependently reduced the liver-to-body weight ratio to reverse hepatomegaly.
Dose-dependently reduced hepatic macrovesicular steatosis, hepatocellular ballooning, lipid droplet accumulation, and collagen deposition.
Reduced total NAS scores from 5.4 (model group) to 3.6 (25 mg/kg), 3.1 (50 mg/kg), and 2.2 (100 mg/kg); dose-dependently decreased hepatocellular ballooning and steatosis sub-scores.

化学信息

分子量 416.42
分子式 C25H20O6

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础