Antitumor agent-217

Antitumor agent-217 是一种双线粒体靶向的抗癌剂,对膀胱癌细胞 J82 具有强效且选择性的抗增殖活性 (IC50 = 6.3 μM),可抑制 J82 的集落形成与迁移,并在线粒体中积累,改变线粒体形态,减少 ATP 生成,提高 ROS 生成量并降低线粒体膜电位,从而诱导膀胱癌细胞发生凋亡 (Apoptosis) 和铁死亡 (Ferroptosis),可用于膀胱癌的研究。
Antitumor agent-217
产品编号: MS-W61596 分子式: C32H36BrClN5O2P 分子量: 668.99
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Antitumor agent-217 是一种双线粒体靶向的抗癌剂,对膀胱癌细胞 J82 具有强效且选择性的抗增殖活性 (IC50 = 6.3 μM),可抑制 J82 的集落形成与迁移,并在线粒体中积累,改变线粒体形态,减少 ATP 生成,提高 ROS 生成量并降低线粒体膜电位,从而诱导膀胱癌细胞发生凋亡 (Apoptosis) 和铁死亡 (Ferroptosis),可用于膀胱癌的研究。

生物实验数据

生物活性 Antitumor agent-217 is a dual mitochondria-targeted anticancer agent that exhibits potent and selective antiproliferative activity against bladder cancer J82 cells (IC50 = 6.3 μM), inhibits colony formation and migration of J82 cells, accumulates in mitochondria, alters mitochondrial morphology, reduces ATP production, increases ROS generation, and decreases mitochondrial membrane potential, thereby inducing apoptosis and ferroptosis in bladder cancer cells, and can be used for bladder cancer research.
IC50 & Target

Bax

 

Bcl-2

 

体外研究
(In Vitro)

Antitumor agent-217 (化合物 7f) (Range of concentrations; 72 h) 可抑制 OVCAR3、SKOV3、J82、T24 和 A549 癌细胞的活力,其中对 J82 细胞的效力最强 (IC50 = 6.3 μM),且相对于正常 SV-HUC-1 细胞具有高选择性。
Antitumor agent-217 (1.5-6 μM; 6-8 days) 可剂量依赖性地抑制 J82 膀胱癌细胞的集落形成。
Antitumor agent-217 (1.5-6 μM; 24-48 h) 可剂量依赖性地抑制 J82 膀胱癌细胞的迁移。
Antitumor agent-217 (10 μM; 4 h) 在 J82 膀胱癌细胞的线粒体中积累。
Antitumor agent-217 (8 μM; 48 h) 可破坏 J82 膀胱癌细胞的线粒体形态,引发线粒体肿胀、膜破裂及嵴丢失。
Antitumor agent-217 (2-8 μM; 48 h) 剂量依赖性地降低 ATP 生成和线粒体膜电位,并增加 J82 膀胱癌细胞中的细胞内 ROS 水平。
Antitumor agent-217 (2-8 μM; 48 h) 可降低 ATP 生成和线粒体膜电位,增加细胞内 ROS 水平,上调促凋亡蛋白 BAX,下调抗凋亡蛋白 BCL-2,抑制 NRF2/SLC7A11/GPX4 信号通路,同时升高脂质过氧化和 MDA 水平,降低 GSH 水平,从而诱导 J82 膀胱癌细胞发生凋亡和铁死亡。

Cell Proliferation Assay

Cell Line: J82 human bladder cancer cells
Concentration: 1.5, 3, 6 μM
Incubation Time: 6-8 days
Result: Dose-dependently inhibited colony formation of J82 cells, with significant inhibition at all tested concentrations compared to untreated controls.
Showed slightly greater inhibitory potency than cisplatin at equal concentrations.

Cell Migration Assay

Cell Line: J82 human bladder cancer cells
Concentration: 1.5, 3, 6 μM
Incubation Time: 24 h, 48 h
Result: Significantly reduced the migration ability of J82 cells, with dose-dependent inhibition of wound closure at 24 and 48 h compared to untreated controls.
Exhibited an inhibitory effect comparable to that of cisplatin.

Apoptosis Analysis

Cell Line: J82 human bladder cancer cells
Concentration: 2, 4, 8 μM
Incubation Time: 48 h
Result: Induced 5.02% early apoptosis and 47.5% late apoptosis in J82 cells at 8 μM, with total apoptosis reaching ~52.5%.
Dose-dependently upregulated pro-apoptotic BAX protein and downregulated anti-apoptotic BCL-2 protein, with the BAX/GAPDH ratio increasing to ~1.7 and the BCL-2/GAPDH ratio decreasing to ~0.5 at 8 μM compared to control.

化学信息

分子量 668.99
分子式 C32H36BrClN5O2P

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础