ClpP activator-2

ClpP activator-2 (Compound GU18) 是一种 ClpP 激活剂,对 HsClpP 的 Kd 为 5.01 μM,可增强 HsClpP 的蛋白水解活性并促进其对 α-casein 的降解(EC50 为 1.09 μM),同时诱导线粒体活性氧 (ROS) 积累、引发线粒体结构与功能损伤,并具有显著的体内抗多发性骨髓瘤活性。
产品编号: MS-V91373 CAS No.: 3036751-71-7 分子式: C22H19Cl2F3N4O 分子量: 483.31
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

ClpP activator-2 (Compound GU18) 是一种 ClpP 激活剂,对 HsClpP 的 Kd 为 5.01 μM,可增强 HsClpP 的蛋白水解活性并促进其对 α-casein 的降解(EC50 为 1.09 μM),同时诱导线粒体活性氧 (ROS) 积累、引发线粒体结构与功能损伤,并具有显著的体内抗多发性骨髓瘤活性。

生物实验数据

生物活性 ClpP activator-2 (Compound GU18) is a ClpP activator with a Kd of 5.01 μM for HsClpP that enhances the proteolytic activity of HsClpP and promotes its degradation of α-casein with an EC50 of 1.09 μM, induces the accumulation of mitochondrial reactive oxygen species (ROS) to cause mitochondrial structural and functional damage, and exhibits significant in vivo anti-multiple myeloma activity.
体外研究
(In Vitro)

ClpP activator-2 强效激活纯化的 HsClpP,其 EC50 为 0.54 ± 0.12 μM。
ClpP activator-2 (2 h) 可促进 HsClpP 对 α-casein 的降解,其 EC50 为 1.09 ± 0.08 μM。
ClpP activator-2 可与纯化的 HsClpP 结合,通过 ITC 测得其解离常数 Kd 为 5.01 ± 1.05 μM。
ClpP activator-2 (0.45 μM; 24 h) 可在 0.45 μM 处理 24 h 后对 AMO.1 MM 细胞造成显著的线粒体超微结构损伤。
ClpP activator-2 (0.15-0.6 μM; 48 h) 可在处理 48 h 后,以浓度依赖的方式促进 AMO.1 和 ARP1 多发性骨髓瘤 (MM) 细胞中线粒体活性氧 (ROS) 的积累。

Cell Viability Assay

Cell Line: Human multiple myeloma cell lines AMO.1, ARP1
Concentration: Gradient concentrations
Incubation Time: 24 h, 48 h, 72 h
Result: Reduced cell viability in a time- and concentration-dependent manner.
For AMO.1 cells, reached IC50 values of 1.30 ± 0.08 μM (24 h), 0.68 ± 0.03 μM (48 h), and 0.08 ± 0.01 μM (72 h).
For ARP1 cells, reached IC50 values of 1.81 ± 0.14 μM (24 h), 0.86 ± 0.08 μM (48 h), and 0.21 ± 0.02 μM (72 h).

Cell Cycle Analysis

Cell Line: Human multiple myeloma cell lines AMO.1, ARP1
Concentration: 0.15-0.6 μM
Incubation Time: 24 h
Result: Induced dose-dependent G1 phase.

Apoptosis Analysis

Cell Line: Human multiple myeloma cell lines AMO.1, ARP1
Concentration: 0.15-0.6 μM (apoptosis assay); 0.45 μM (Western blotting)
Incubation Time: 24 h, 48 h, 72 h (apoptosis assay); 48 h (Western blotting)
Result: Induced time- and concentration-dependent apoptosis, with 95% of AMO.1 cells and 73.8% of ARP1 cells apoptotic after 72 h of 0.6 μM treatment.
Upregulated cleaved caspase-3.
体内研究
(In Vivo)

ClpP activator-2 (5-30 mg/kg;腹腔注射;隔日一次;14 天) 可剂量依赖性地抑制 NOD/SCID 小鼠体内多发性骨髓瘤的肿瘤生长。

Animal Model: NOD/SCID (female, 6-8 weeks old, subcutaneous xenograft model)
Dosage: 5 mg/kg; 15 mg/kg; 30 mg/kg
Administration: i.p.; every other day; 14 days
Result: Achieved 56.7% tumor volume inhibition at 5 mg/kg.
Achieved 83.4% tumor volume inhibition at 15 mg/kg.
Achieved 91.4% tumor volume inhibition at 30 mg/kg.
Showed no treatment-related damage to major organs in the 30 mg/kg group compared to controls.

化学信息

分子量 483.31
分子式 C22H19Cl2F3N4O
CAS No. 3036751-71-7

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础