NOD2 antagonist 1

产品编号: MS-V47379 纯度: 99.57% CAS No.: 2411441-54-6 分子式: C26H26N4O3S 分子量: 474.57
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价

生物实验数据

生物活性

NOD2 antagonist 1 is a selective NOD2 antagonist with an IC50 of 5.23 μM. NOD2 antagonist 1 acts directly on the NOD2 protein, downregulates the secretion of pro-inflammatory cytokines such as IL-8 and TNF-α, and inhibits the synergistic cross-response of inflammation mediated by NOD2 and TLR4. NOD2 antagonist 1 can be used in studies related to immunity and inflammation.

IC50 & Target NOD2:5.23 μM
体外研究
(In Vitro)

NOD2 antagonist 1 (compound 32) (0.3125-20 μM; 1 h preincubation before 18 h agonist stimulation) 可强效且中等选择性地抑制 HEK-Blue NOD2 细胞中 NOD2 介导的 NF-κB 转录活性,其 IC50 为 5.23 μM;同时可抑制 HEK-Blue NOD1 细胞中 NOD1 介导的活性,IC50 为 28.2 μM。
NOD2 antagonist 1 (20 μM; 18 h) 对 NOD2 和 NOD1 细胞无细胞毒性。
NOD2 antagonist 1 (20 μM; 1 h preincubation before 20 h agonist stimulation) 可在 20 μM 浓度下显著抑制 THP-1 细胞中 MDP 诱导的 IL-8 释放,并适度降低同一细胞系中 C12-iE-DAP 诱导的 IL-8 释放。
NOD2 antagonist 1 (20 μM; 1 h preincubation before 20 h dual agonist stimulation) 可在 20 μM 浓度下强效阻断 THP-1 细胞中 NOD2/TLR4 串扰诱导的 TNF-α 释放,仅对相同细胞系中 NOD1/TLR4 串扰诱导的 TNF-α 释放表现出微弱的抑制作用。
NOD2 antagonist 1 (20 μM; 1 h preincubation before 18 h agonist stimulation) 可在 20 μM 浓度下抑制人原代 PBMC 中 NOD2 介导的 IL-6、IL-10 和 TNF-α 释放,且不影响 T 淋巴细胞来源的细胞因子释放。

ELISA Assay

Cell Line: human leukemia monocytic THP-1 cells
Concentration: 20 μM
Incubation Time: 1 h preincubation before 20 h agonist stimulation
Result: Significantly suppressed MDP-induced IL-8 release in THP-1 cells, with inhibitory activity similar to the positive control GSK669.
Reduced C12-iE-DAP-induced IL-8 release, though to a lesser extent than the positive control noditinib-1.

ELISA Assay

Cell Line: human leukemia monocytic THP-1 cells
Concentration: 20 μM
Incubation Time: 1 h preincubation before 20 h dual agonist stimulation
Result: Markedly suppressed TNF-α release from THP-1 cells stimulated with MDP plus LPS, reducing levels to those induced by LPS alone.
Only slightly decreased TNF-α release from cells stimulated with C12-iE-DAP plus LPS.
性状 固体
颜色 White to off-white

化学信息

分子量 474.57
分子式 C26H26N4O3S
CAS No. 2411441-54-6

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 35.71 mg/mL (75.25 mM; 超声助溶 (<60°C); 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.1072 mL10.5359 mL21.0717 mL52.6793 mL
5 mM0.4214 mL2.1072 mL4.2143 mL10.5359 mL
10 mM0.2107 mL1.0536 mL2.1072 mL5.2679 mL
15 mM0.1405 mL0.7024 mL1.4048 mL3.5120 mL
20 mM0.1054 mL0.5268 mL1.0536 mL2.6340 mL
25 mM0.0843 mL0.4214 mL0.8429 mL2.1072 mL
30 mM0.0702 mL0.3512 mL0.7024 mL1.7560 mL
40 mM0.0527 mL0.2634 mL0.5268 mL1.3170 mL
50 mM0.0421 mL0.2107 mL0.4214 mL1.0536 mL
60 mM0.0351 mL0.1756 mL0.3512 mL0.8780 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础