Anticancer agent 324

Anticancer agent 324 是一种 Survivin 抑制剂,可竞争性结合 Survivin 的连接区并触发 IAP 的蛋白酶体降解,阻断 Borealin 结合及染色体过客复合物的形成,抑制 Survivin-CRM1 核质转运,激活外源性 (caspase-8) 和内源性 (caspase-9) 凋亡 (apoptosis) 通路,激活执行型 caspase-3 和 caspase-7,并阻滞细胞周期,可用于乳腺癌的研究。
Anticancer agent 324
产品编号: MS-V31566 分子式: C85H130N28O21S 分子量: 1912.18
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Anticancer agent 324 是一种 Survivin 抑制剂,可竞争性结合 Survivin 的连接区并触发 IAP 的蛋白酶体降解,阻断 Borealin 结合及染色体过客复合物的形成,抑制 Survivin-CRM1 核质转运,激活外源性 (caspase-8) 和内源性 (caspase-9) 凋亡 (apoptosis) 通路,激活执行型 caspase-3 和 caspase-7,并阻滞细胞周期,可用于乳腺癌的研究。

生物实验数据

生物活性 Anticancer agent 324 is a Survivin inhibitor that competitively binds to the linker region of Survivin to trigger proteasomal degradation of IAP, blocks Borealin binding and chromosomal passenger complex formation, inhibits Survivin-CRM1 nucleocytoplasmic transport, activates both extrinsic (caspase-8) and intrinsic (caspase-9) apoptosis pathways, activates executioner caspase-3 and caspase-7, and induces cell cycle arrest, and can be used for breast cancer research.
IC50 & Target

Caspase-3

 

Caspase-7

 

Caspase-8

 

Caspase-9

 

体外研究
(In Vitro)

Anticancer agent 324 (Compound P3) 与 Survivin 的连接区结合的亲和力高于 cIAP1、NAIP 和 XIAP,使其能够竞争性破坏 Survivin 与这些 IAP 家族成员之间的保护性相互作用。
Anticancer agent 324 (5-50 μM;24-48 小时) 呈时间依赖性降低 MCF-7 人乳腺癌细胞的活力。
Anticancer agent 324 (15-45 μM;24-48 小时) 可在体外以时间依赖的方式诱导人乳腺癌 MCF-7 细胞中的 caspase-3 和 caspase-7 活性。
Anticancer agent 324 (25 μM;48 小时) 可显著激活 MCF-7 人乳腺癌细胞中的 caspase-8 (外源性通路) 和 caspase-9 (内源性通路)。
Anticancer agent 324 (25 μM;48 小时) 可显著提高 MCF-7 人乳腺癌细胞的凋亡水平和有丝分裂灾变发生率。

Cell Viability Assay

Cell Line: MCF-7 human breast cancer cells
Concentration: 5 μM; 10 μM; 15 μM; 20 μM; 25 μM; 30 μM; 35 μM; 40 μM; 45 μM; 50 μM
Incubation Time: 24 h; 48 h
Result: Reduced MCF-7 cell viability in a time-dependent manner.
Reached an IC50 of 40 μM at 24 h and 25 μM at 48 h.
Showed significant reductions in viability at all tested concentrations relative to control at 48 h, with effect sizes (Cohen's d) ranging from 6.20 to 19.52.

Apoptosis Analysis

Cell Line: MCF-7 human breast cancer cells
Concentration: 15 μM; 25 μM; 35 μM; 45 μM
Incubation Time: 24 h; 48 h
Result: Increased total apoptosis to 82.78% at 25 μM, with significant increases in early apoptosis (18.7%, p = 0.0044, Cohen's d = -4.73) and late apoptosis (64.1%, p = 2.86e-05, Cohen's d = -17.4), and minimal non-significant necrosis (1.36%, p = 0.0868).
Increased total apoptosis to 23.23% at 45 μM, with significant increases only in late apoptosis (19.2%, p = 0.001, Cohen's d = 5.53) and necrosis (13.1%, p = 0.0043, Cohen's d = 5.86), while early apoptosis did not change significantly (p = 0.462).

Immunofluorescence

Cell Line: MCF-7 human breast cancer cells
Concentration: 25 μM
Incubation Time: 48 h
Result: Significantly increased the proportion of non-viable cells (red fluorescence from PI) relative to control (p = 0.00011), confirming induction of apoptosis and mitotic catastrophe.

化学信息

分子量 1912.18
分子式 C85H130N28O21S

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础