TYMJ-01 是一种荧光探针和 eEF2K 分子胶降解剂,可通过泛素-蛋白酶体通路诱导 eEF2K 呈剂量依赖性的特异性降解(DC50 为 82 nM),抑制三阴性乳腺癌细胞的增殖、迁移和侵袭,实现三阴性乳腺癌细胞内 eEF2K 降解的动态荧光成像,增强 Paclitaxel 的抗肿瘤活性,并可用于三阴性乳腺癌的研究。
产品编号: MS-U98658 CAS No.: 3109321-90-3 分子式: C27H28N6O4S 分子量: 532.61
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

TYMJ-01 是一种荧光探针和 eEF2K 分子胶降解剂,可通过泛素-蛋白酶体通路诱导 eEF2K 呈剂量依赖性的特异性降解(DC50 为 82 nM),抑制三阴性乳腺癌细胞的增殖、迁移和侵袭,实现三阴性乳腺癌细胞内 eEF2K 降解的动态荧光成像,增强 Paclitaxel 的抗肿瘤活性,并可用于三阴性乳腺癌的研究。

生物实验数据

生物活性 TYMJ-01 is a fluorescent probe and eEF2K molecular glue degrader that induces dose-dependent and specific degradation of eEF2K via the ubiquitin-proteasome pathway with a DC50 of 82 nM, inhibits the proliferation, migration, and invasion of triple-negative breast cancer cells, enables dynamic fluorescence imaging of eEF2K degradation in triple-negative breast cancer cells, enhances the antitumor activity of Paclitaxel, and can be used for the study of triple-negative breast cancer.
IC50 & Target eEF2K:82 nM (DC50)
体外研究
(In Vitro)

TYMJ-01 (500 nM; 3-48 h) 可对固定化 MDA-MB-231 细胞中 eEF2K 的降解过程进行实时可视化观察,其荧光强度随 3-48 h 孵育时长增加而降低,且与细胞核内的 eEF2K 共定位。
TYMJ-01 (10 μM; 1-48 h) 可对活的 MDA-MB-231 细胞中 eEF2K 的降解过程进行实时可视化观察,其荧光强度在 6 h 时达到峰值后下降,且不会造成细胞损伤。
TYMJ-01 (500 nM; 24 h) 单药细胞毒性极低,但可显著增强 Paclitaxel 在 MDA-MB-231 细胞中的抗肿瘤活性。
TYMJ-01 (0.2-1.0 μM; 24 h) 可抑制 MDA-MB-231 细胞增殖。
TYMJ-01 (0.2-1.0 μM; 48 h) 可通过下调关键细胞周期调控因子,在 MDA-MB-231 细胞中诱导 G1 期细胞周期阻滞。
TYMJ-01 (200 nM; 48 h) 可通过下调关键迁移相关调控因子抑制 MDA-MB-231 细胞的迁移。
TYMJ-01 (4.12-1000 nM; 24 h) 可在 MDA-MB-231 细胞中以剂量依赖方式下调增殖、存活及迁移相关蛋白 c-Myc、Bcl-2 和 N-cadherin 的表达。

Immunofluorescence

Cell Line: MDA-MB-231 cells
Concentration: 500 nM
Incubation Time: 3, 6, 12, 24, 48 h
Result: Showed decreasing green fluorescence intensity (corresponding to eEF2K binding) over incubation time, which correlated with decreasing red fluorescence from anti-eEF2K antibody.
Co-localized fluorescence with DAPI-stained nuclei, confirming nucleoplasmic distribution of eEF2K binding.

Cell Viability Assay

Cell Line: MDA-MB-231 cells
Concentration: 500 nM (alone or in combination with paclitaxel 10 nM)
Incubation Time: 24 h
Result: Had minimal impact on cell viability when used alone.
Increased the cell inhibitory rate by nearly 25% when combined with paclitaxel (10 nM) compared to paclitaxel alone.

Cell Proliferation Assay

Cell Line: MDA-MB-231 cells
Concentration: 0.2, 0.5 and 1.0 μM(24 h, EdU assay); not specified (10 days, colony formation assay)
Incubation Time: 24 h (EdU assay); 10 days (colony formation assay)
Result: Markedly reduced the proportion of EdU-positive cells.
Significantly suppressed colony formation capacity.

Cell Cycle Analysis

Cell Line: MDA-MB-231 cells
Concentration: 0.2, 0.5 and 1.0 μM
Incubation Time: 48 h
Result: Increased the proportion of cells in the G1 phase and decreased the proportion of cells in the S phase in a dose-dependent manner.
Downregulated mRNA expression of cell cycle-related genes cyclinD, cyclinE, CDK4, and CDK6.

Cell Migration Assay

Cell Line: MDA-MB-231 cells
Concentration: 200 nM
Incubation Time: 48 h
Result: Markedly reduced the wound closure rate.
Downregulated mRNA and protein expression of migration-related genes/proteins N-cadherin, E-cadherin, Vimentin, and c-Myc.

Western Blot Analysis

Cell Line: MDA-MB-231 cells
Concentration: 4.12, 12.35, 37, 111, 333 and 1000 nM
Incubation Time: 24 h
Result: Induced dose-dependent downregulation of c-Myc, Bcl-2, and N-cadherin protein levels.

化学信息

分子量 532.61
分子式 C27H28N6O4S
CAS No. 3109321-90-3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础