B026 是一种选择性且口服有效的 p300/CBP 组蛋白乙酰转移酶 (p300/CBP HAT) 抑制剂,对 p300 和 CBP 的 IC50 值分别为 1.8 nM 和 9.5 nM,并对雄激素受体阳性 (AR+) 前列腺癌细胞具有抗癌活性。
产品编号: MS-U53873 CAS No.: 2379416-48-3 分子式: C27H23F4N5O4 分子量: 557.50
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
询价
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价

产品描述

B026 是一种选择性且口服有效的 p300/CBP 组蛋白乙酰转移酶 (p300/CBP HAT) 抑制剂,对 p300 和 CBP 的 IC50 值分别为 1.8 nM 和 9.5 nM,并对雄激素受体阳性 (AR+) 前列腺癌细胞具有抗癌活性。

生物实验数据

生物活性 B026 is a selective and orally active p300/CBP histone acetyltransferase (p300/CBP HAT) inhibitor with IC50 values of 1.8 nM and 9.5 nM for p300 and CBP, respectively, and exhibits anticancer activity against androgen receptor-positive (AR+) prostate cancer cells.
体外研究
(In Vitro)

B026 (0-5 μM; 12 h; cancer cell lines) has antiproliferative activity.
B026 (0-5 μM; 6 h; MV-4-11 cells) exhibits inhibitory effects on H3K27Ac expression.
B026 (0-5 μM; 12 h; MV-4-11 cells) targets the cellular p300 protein and increases the thermal stability of p300 protein in a dose-dependent manner.
B026 (0-1 μM; 24 h; MV-4-11 cells) decreases the expression of MYC, which a key oncogenictranscription factor that is regulated by superenhancer regions containing p300/CBP.

Cell Viability Assay

Cell Line: Maver-1, MV-4-11, K562, Kasumi-1, LnCaP-FGC and 22Rv1 cells
Concentration: 0-5 μM
Incubation Time: 12 hours
Result: Inhibited cell growth with IC50 values of 2.6, 4.2, 4.4, 9.8, 40.5 and 104.4 nM for Maver-1, MV-4-11, 22Rv1, LnCaP-FGC, Kasumi-1 and K562 cells, respectively.

Western Blot Analysis

Cell Line: MV-4-11 cells
Concentration: 0, 0.313, 0.625, 1.25, 2.5 and 5 μM
Incubation Time: 6 hours
Result: Decreased the expression of H3K27Ac in a dose-dependent manner.
体内研究
(In Vivo)

B026 (1-3 mg/kg; i.v. and p.o.; 0-24 h; male SD rats) has a low clearance (13.4 mL/min/kg) and good oral exposure (AUC=3.71 μM·h) with good oral bioavailability (F=56%) in rat.
B026 (50-100 mg/kg; p.o.; daily, for 28 days; balb/c female mice) inhibits tumor growth in a dose-dependent manner.

Animal Model: Balb/c female mice with MV-4-11 xenograft
Dosage: 50 and 100 mg/kg
Administration: Oral administration; daily, for 28 days
Result: Inhibited tumor growth with TGI of 75.0% at 50 mg/kg and 85.7% at 100 mg/kg, respectively.
Animal Model: Male SD rats
Dosage: 1 and 3 mg/kg
Administration: Intravenous injection and oral administration; 0.25, 0.5, 1, 2, 4, 8 and 24 hours
Result: 1.19
Administration i.v. (1 mg/kg) p.o. (3 mg/kg)
T1/2 (h) 1.5 1.02
Tmax (h) 0.83
Cmax (μM) 1.12
AUClast (μM·h) 2.22 3.71
Vdss (L/kg) 1.5
CL_obs (mL/min/kg) 13.4
PPB % 98.2
F % 56

化学信息

分子量 557.50
分子式 C27H23F4N5O4
CAS No. 2379416-48-3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础