Eloralintide sodium

Synonyms: LY-3841136 sodium
Eloralintide sodium 是一种胰淀素受体 (Amylin Receptor) 激动剂,可在表达人或大鼠 AMY1R、AMY3R 或 CTR 的细胞中选择性激活 AMY1R 和 AMY3R,在大鼠中激活 AMYRs 和 CTR 并诱导血浆 Ca2+ 水平持续降低,同时在瘦型和肥胖型大鼠中降低食欲、减轻体重,因此可用于肥胖症的相关研究。
Eloralintide sodium
产品编号: MS-U41229 纯度: 99.72% 分子式: C201H319N49O65S2.xNa 分子量: 4526.10 (free base)
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

Eloralintide sodium 是一种胰淀素受体 (Amylin Receptor) 激动剂,可在表达人或大鼠 AMY1R、AMY3R 或 CTR 的细胞中选择性激活 AMY1R 和 AMY3R,在大鼠中激活 AMYRs 和 CTR 并诱导血浆 Ca2+ 水平持续降低,同时在瘦型和肥胖型大鼠中降低食欲、减轻体重,因此可用于肥胖症的相关研究。

生物实验数据

生物活性 Eloralintide sodium is an amylin receptor (Amylin Receptor) agonist that selectively activates AMY1R and AMY3R in cells expressing human or rat AMY1R, AMY3R, or CTR, activates AMYRs and CTR in rats to induce a sustained decrease in plasma Ca2+ levels, and reduces appetite and body weight in lean and obese rats, making it suitable for research related to obesity.
体外研究
(In Vitro)

Eloralintide 在表达人或大鼠的 AMY1R、 AMY3R 或 CTR 的 UMUC3 细胞可选择性激活 AMY1R,AMY3R,对人 AMY1R 的 EC50 为 23.9 pM,对人 AMY1R 的 Ki 为 478.1 pM,对大鼠 AMY1R 的 EC50 为 5.4 pM,对大鼠 AMY1R 的 Ki 为 48.1 pM,对大鼠 AMY3R 的 EC50 为 13.8 pM,对大鼠 AMY3R 的 Ki 为 161.0 pM。

体内研究
(In Vivo)

Eloralintide sodium(10-30 nmol/kg,皮下注射,单次)可激活大鼠体内的 AMYR 和 CTR,并诱导血浆 Ca2+ 水平持续下降。
Eloralintide sodium (0.1-300 nmol/kg,皮下注射,单次给药) 可降低瘦鼠的食物摄入量和体重,减弱诱导的条件性味觉厌恶,并且降低甜味剂偏好的 ED50 为 8.9 nmol/kg。
Eloralintide sodium (0.1-100 nmol/kg,皮下注射,每三天一次,持续 13 天) 可通过减少脂肪量来降低雄性 DIO 大鼠的食物摄入量和体重。

Animal Model: Rat
Dosage: 10 or 30 nmol/kg
Administration: s.c.; single dose
Result: Induced a prolonged decrease in Ca2+ plasma levels.
Animal Model: Sprague-Dawley Rats (male, lean)
Dosage: 0.1, 0.3, 1, 30, 100, 300 nmol/kg
Administration: s.c.; single dose
Result: Dose-dependently reduced food intake and body
weight, with an ED50 of 3.7 nmol/kg for 96-hour food intake reduction and a 14.9% body weight reduction at the 300 nmol/kg single dose.
Attenuated the induced conditioned taste avoidance.
Reached an ED50 of 8.9 nmol/kg for saccharin preference reduction.
Animal Model: Long Evans DIO SD Rat (male, diet-induced obese)
Dosage: 0.1, 0.3, 1, 30, 100 nmol/kg
Administration: s.c.; every three days; 13 days
Result: Reduced food intake and body weight in a dose-dependent manner.
Reached an ED50 of 3.7 nmol/kg for change from baseline in food intake at 96 h.
Reached an ED50 of 6.1 nmol/kg for change from baseline in body weight at 96 h.
Resulted in fat mass loss accounting for approximately 85%, 77%, and 68% of total body weight loss at doses of 10, 30, and 100 nmol/kg Q3D, respectively.\nReached an ED50 of 0.8 nmol/kg for loss of fat mass.
性状 固体
颜色 White to off-white

化学信息

分子量 4526.10 (free base)
分子式 C201H319N49O65S2.xNa
别名 LY-3841136 sodium

储存&溶解度

储存方式

Sealed storage, away from moisture

Powder -80°C 2 years
-20°C 1 year

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础