α,β-Methylene-ATP dilithium

α,β-Methylene-ATP dilithium 是一种能够透过血脑屏障的 P2X1 和 P2X3 受体激动剂,它通过激活外周肌肉和中枢蓝斑核 (LC) 的 P2X 受体引发可被 P2X 拮抗剂 PPADS (MS-J68606) 阻断的反射性升压反应,并通过激活中枢蓝斑核的去甲肾上腺素能神经元介导可被蓝斑核损伤剂 DSP-4 (MS-V75493/MS-W66159) 削弱抗伤害作用,可用于研究神经性疼痛病理机制、心血管反射调节及中枢神经系统的抗伤害作用。
产品编号: MS-T97691 CAS No.: 104809-20-3 分子式: C11H18Li2N5O12P3 分子量: 519.09
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

α,β-Methylene-ATP dilithium 是一种能够透过血脑屏障的 P2X1 和 P2X3 受体激动剂,它通过激活外周肌肉和中枢蓝斑核 (LC) 的 P2X 受体引发可被 P2X 拮抗剂 PPADS (MS-J68606) 阻断的反射性升压反应,并通过激活中枢蓝斑核的去甲肾上腺素能神经元介导可被蓝斑核损伤剂 DSP-4 (MS-V75493/MS-W66159) 削弱抗伤害作用,可用于研究神经性疼痛病理机制、心血管反射调节及中枢神经系统的抗伤害作用。

生物实验数据

生物活性 α,β-Methylene-ATP dilithium is an agonist of P2X1 and P2X3 receptors that crosses the blood-brain barrier, elicits a reflex pressor response by activating P2X receptors in peripheral muscles and the central locus coeruleus (LC) that can be blocked by the P2X antagonist PPADS (MS-J68606), and mediates antinociception by activating noradrenergic neurons in the central locus coeruleus that can be attenuated by the locus coeruleus lesioning agent DSP-4 (MS-V75493/MS-W66159), making it useful for studying the pathological mechanisms of neuropathic pain, cardiovascular reflex regulation, and antinociception in the central nervous system.
IC50 & Target

p2x1 Receptor

 

P2X3 Receptor

 

P2X7 Receptor

 

体外研究
(In Vitro)

电生理活性:
α,β-Methylene-ATP trisodium (10 μM;3 秒) 在大鼠背根神经节 (DRG) 神经元中诱发快速内向电流,与 P2X3 受体激活有关。10 μM Diinosine pentaphosphate (Ip5I) 可显著抑制这种内向电。
α,β-Methylene-ATP trisodium (10 μM;瞬时) 在大鼠肾上腺髓质嗜铬细胞 (Chromaffin cells) 中增强 Acetylcholine (MS-X27241) 诱发的电流幅度,且对 α-conotoxin RgIA (MS-X62748) 敏感的电流比例增加。

体内研究
(In Vivo)

α,β-Methylene-ATP (5-50 μg/kg;左侧腘动脉注射;单剂量) dilithium 在去大脑猫模型中诱发反射性升压反应,该反应可被坐骨神经切断或 P2X 受体拮抗剂 PPADS (MS-J68606) (10 mg/kg;左腘动脉注射) 阻断。
α,β-Methylene-ATP (10 nmol/rat;脑室内注射;单剂量) dilithium 在 Sprague-Dawley 大鼠中产生抗机械伤害作用,该作用可被 DSP-4 (MS-W66159/MS-V75493) (10 mg/kg DSP-4;腹腔注射) 预处理显著减弱。
α,β-Methylene-ATP (0.1-1 nmol/side;双侧蓝斑核微注射;单剂量) dilithium 在 Sprague-Dawley 大鼠中,以剂量依赖性升高大鼠的疼痛阈值,该效应可被 PPADS (MS-J68606) (0.1-1 nmol/side) 共注射拮抗。

Animal Model: Decerebrate cats
Dosage: 5, 20, 50 µg/kg α,β-Methylene-ATP
Administration: Left popliteal artery injection, single dose
Result: Significantly increased mean arterial pressure.
The pressor response was attenuated by sciatic nerve section and completely blocked by prior popliteal artery injection of PPADS (10 mg/kg), indicating involvement of P2X receptors in muscle afferents.
Animal Model: Sprague-Dawley rats (male, 180-250 g, 6-8 weeks old)
Dosage: 10 nmol/rat
Administration: Intracerebroventricular injection, single dose
Result: Elevated the mechanical nociceptive threshold by 63.6% at 5 min post-injection. Pretreatment with DSP-4 (50 mg/kg, i.p.), a noradrenergic neurotoxin, reduced the antinociceptive effect to baseline levels, suggesting involvement of locus coeruleus noradrenergic neurons.
Animal Model: Sprague-Dawley rats (male, 180-250 g, 6-8 weeks old)
Dosage: 0.1-1 nmol/side
Administration: Bilateral locus coeruleus microinjection, single dose, no cycle
Result: Dose-dependently increased the nociceptive threshold (peak at 5 min, 117.9% above control at 1 nmol/side).
Co-injection of PPADS (1 nmol/side) completely antagonized the antinociceptive effect, confirming P2X receptor-mediated mechanism.

化学信息

分子量 519.09
分子式 C11H18Li2N5O12P3
CAS No. 104809-20-3

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础