JST-TfR09

Synonyms: PPMX-T003; TSP-A18
JST‑TfR09 (PPMX‑T003) 是一种靶向转铁蛋白受体 1 (TfR1/CD71) 的人源单克隆抗体 (mAb),可阻断转铁蛋白与 TfR1 的结合、抑制 TfR1 内化及细胞铁摄取,并通过激活自溶酶体系统触发铁蛋白降解、促进 ROS 生成和脂质过氧化,最终诱导铁死亡 (ferroptosis),对由造血干细胞分化而来的人成红细胞具有细胞毒性,可用于白血病研究,推荐同型对照为 Human IgG1 lambda, Isotype Control (MS-J32982)。
JST-TfR09
产品编号: MS-T94738 纯度: 99.59% 分子量: 145.79 kDa
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

JST‑TfR09 (PPMX‑T003) 是一种靶向转铁蛋白受体 1 (TfR1/CD71) 的人源单克隆抗体 (mAb),可阻断转铁蛋白与 TfR1 的结合、抑制 TfR1 内化及细胞铁摄取,并通过激活自溶酶体系统触发铁蛋白降解、促进 ROS 生成和脂质过氧化,最终诱导铁死亡 (ferroptosis),对由造血干细胞分化而来的人成红细胞具有细胞毒性,可用于白血病研究,推荐同型对照为 Human IgG1 lambda, Isotype Control (MS-J32982)。

生物实验数据

生物活性 JST‑TfR09 (PPMX‑T003) is a human monoclonal antibody (mAb) targeting transferrin receptor 1 (TfR1/CD71) that blocks transferrin binding to TfR1, inhibits TfR1 internalization and cellular iron uptake, and triggers ferritin degradation via activation of the autolysosomal system, promoting ROS generation and lipid peroxidation to ultimately induce ferroptosis; it is cytotoxic to human erythroblasts differentiated from hematopoietic stem cells and can be used for leukemia research, with the recommended isotype control being Human IgG1 lambda, Isotype Control (MS-J32982).
IC50 & Target

CD71

体外研究
(In Vitro)

JST-TfR09 (10 ng-200 ng; 48 h) 可降低 MT2、Su9T1 和 KK1 的存活率,且这种细胞死亡可被 ferrostatin-1 抑制。
JST-TfR09 (100 ng/mL; 48 h) 可下调 TFR1、FTH1 和 FTL,上调 IRP2 和 NCOA4,并在 ED、KK1 和 MT2 ATLL 细胞系中诱导溶酶体依赖性铁蛋白降解及自噬。
JST-TfR09 (100 ng/mL; 48 h) 可升高 Su9T1、MT2、ST1、SO4、KK1、ED 成人 T 细胞白血病淋巴瘤 (ATLL) 细胞系以及 MOLT4、JURKAT T 细胞急性淋巴细胞白血病 (T-ALL) 细胞系内的细胞内亚铁离子、ROS 和脂质过氧化 (MDA) 水平,这些都是铁死亡的关键标志。
JST-TfR09 对由 CD34 造血干细胞分化而来的人成红细胞产生体外毒性,作用浓度高于 156 ng/mL。

Cell Viability Assay

Cell Line: adult T-cell leukemia/lymphoma (ATLL) cell lines (ED, Su9T01, S1T, KK1, KOB, ST1), HTLV-1-transformed human T-cell lines (MT2, HUT102), cutaneous T-cell lymphoma (CTCL) cell lines (HUT78, HH)
Concentration: 10 ng/well; 200 ng; 100 ng/mL
Incubation Time: 48 h
Result: Reduced the viability of MT2, Su9T1, and KK1 ATLL cell lines to 40-60% relative to controls.
Increased cell viability to almost 80% in MT2, Su9T1, and KK1 ATLL cell lines when co-treated with ferrostatin-1.

Western Blot Analysis

Cell Line: ATLL cell lines (ED, KK1, MT2)
Concentration: 100 ng/mL;
25 μM Aloxistatin (MS-E12703) + 50 μM Pepstatin A (MS-J26816) (pretreatment);
10 μM MG132 (MS-L06849) (pretreatment)
Incubation Time: 48 h (JST-TfR09); 24 h (pretreatment prior to JST-TfR09)
Result: Decreased TFR1, FTH1, and FTL protein levels in ED and KK1 cells.
Increased IRP2 and NCOA4 protein levels in ED and KK1 cells.
Prevented JST-TfR09-induced ferritin degradation in cells pretreated with lysosomal inhibitors, while proteasomal inhibitor pretreatment did not.
Increased LC3-II expression relative to LC3-I in cells, indicating autophagy activation, which was blocked by lysosomal inhibitor co-treatment.
性状 液体
颜色 Colorless to light yellow

化学信息

分子量 145.79 kDa
别名 PPMX-T003; TSP-A18

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Shipping with dry ice.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础