MST3-IN-1 是一种选择性且具有口服活性的 MST3 抑制剂(IC50 = 122.4 nM),对 HepG2 细胞表现出抗增殖活性,可有效诱导 HepG2 细胞凋亡并将细胞周期阻滞于 G2/M 期,在 HepG2 异种移植小鼠模型中显著抑制肿瘤生长,可用于肝癌的相关研究。
产品编号: MS-T58766 CAS No.: 3095435-97-2 分子式: C25H21F4N5O3S 分子量: 547.52
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

MST3-IN-1 是一种选择性且具有口服活性的 MST3 抑制剂(IC50 = 122.4 nM),对 HepG2 细胞表现出抗增殖活性,可有效诱导 HepG2 细胞凋亡并将细胞周期阻滞于 G2/M 期,在 HepG2 异种移植小鼠模型中显著抑制肿瘤生长,可用于肝癌的相关研究。

生物实验数据

生物活性 MST3-IN-1 is a selective and orally active MST3 inhibitor (IC50 = 122.4 nM) that exhibits antiproliferative activity against HepG2 cells, effectively induces apoptosis and arrests the cell cycle at the G2/M phase in HepG2 cells, significantly inhibits tumor growth in a HepG2 xenograft mouse model, and can be used for research related to liver cancer.
体外研究
(In Vitro)

MST3-IN-1 (Compound LD-1) (72 h) 对多种癌细胞系表现出抗增殖活性,其 GI50 值分别为 0.68 μM (HepG2 细胞)、0.77 μM (HCT116 细胞) 和 0.83 μM (H226 细胞),对 HK2 细胞的抑制作用均大于 30 μM,表现出良好的选择性。
MST3-IN-1 (1 μM) 对 MST3 的抑制率高达 95.49%,而对 AKT2 的抑制率仅为 66.51%。
MST3-IN-1 (0.25-2 μM, 24 h) 可诱导 HepG2 细胞凋亡,并可能通过阻滞 G2/M 期抑制细胞增殖。
MST3-IN-1 (0.33-3 μM, 24 h) 能以浓度依赖性方式降低 p-MST3 的表达水平,但不影响 MST3 的总蛋白表达。

Apoptosis Analysis

Cell Line: HepG2 cells
Concentration: 0.5, 1, 2 μM
Incubation Time: 24 h
Result: Induced apoptosis in HepG2 cells.

Immunofluorescence

Cell Line: HepG2 cells
Concentration: 0.5, 1, 2 μM
Incubation Time: 48 h
Result: Revealed distinct morphological characteristics of apoptosis, including chromatin condensation and nuclear fragmentation.

Cell Cycle Analysis

Cell Line: HepG2 cells
Concentration: 0.25, 0.5, 1 μM
Incubation Time: 24 h
Result: Increased the proportion of cells at the G2/M phase.

Western Blot Analysis

Cell Line: HepG2 cells
Concentration: 0.33, 1, 3 μM
Incubation Time: 24 h
Result: Reduced the expression level of p-MST3.
Increased the expression level of cleaved caspase-3.
Reduced the expression levels of caspase-3 and Bcl-2.
Did not affect the expression level of MST3.
体内研究
(In Vivo)

MST3-IN-1 (Compound LD-1) (40 mg/kg,每日灌胃给药,持续 15 天) 在 HepG2 异种移植小鼠模型中显示出良好的抑制肝细胞癌肿瘤生长的疗效。

Animal Model: HepG2 cells (5 × 106) were injected subcutaneously into the right armpit of the mice
Dosage: 40 mg/kg
Administration: i.g. daily for 15 days
Result: Exhibited a significant tumor growth inhibition (TGI) rate of 47.64%, outperforming the current first-line treatment agent Sorafenib (MS-X92288) (TGI = 32.52%).
Showed no mouse mortality or significant body weight loss was observed across all dosage groups.

化学信息

分子量 547.52
分子式 C25H21F4N5O3S
CAS No. 3095435-97-2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础