ILK-IN-2

Synonyms: OSU-T315 analog
ILK-IN-2(OSU-T315 analog)是一种可口服的 PDK2 抑制剂和 ILK 抑制剂(IC50 为 0.6 μM),可诱导细胞自噬(Autophagy)和凋亡(Apoptosis)并具有抗肿瘤活性,其通过阻止 AKT 向脂筏的转位直接废除 AKT 的激活,触发慢性淋巴细胞白血病(CLL)中 Caspase 依赖性凋亡,并延长 TCL1 小鼠模型的生存期。
产品编号: MS-T41028 纯度: 98.79% CAS No.: 1333146-24-9 分子式: C30H30F3N5O 分子量: 533.59
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
2mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
3-5 天
50mg
询价
询价
100mg
询价
询价
(0.1 - 0.2mg)
询价
询价

产品描述

ILK-IN-2(OSU-T315 analog)是一种可口服的 PDK2 抑制剂和 ILK 抑制剂(IC50 为 0.6 μM),可诱导细胞自噬(Autophagy)和凋亡(Apoptosis)并具有抗肿瘤活性,其通过阻止 AKT 向脂筏的转位直接废除 AKT 的激活,触发慢性淋巴细胞白血病(CLL)中 Caspase 依赖性凋亡,并延长 TCL1 小鼠模型的生存期。

生物实验数据

生物活性 ILK-IN-2 (OSU-T315 analog) is an orally available PDK2 inhibitor and ILK inhibitor with an IC50 of 0.6 μM that induces autophagy and apoptosis and exhibits antitumor activity, directly abolishing AKT activation by preventing AKT translocation to lipid rafts, triggering caspase-dependent apoptosis in chronic lymphocytic leukemia (CLL), and prolonging survival in the TCL1 mouse model.
IC50 & Target ILK:0.6 μM
体外研究
(In Vitro)

ILK-IN-2 (0-10 μM,24 h) 对 CLL 衍生细胞系和原代 CLL 细胞均有剂量依赖性的选择性细胞毒性,但对正常淋巴细胞的影响较小。
ILK-IN-2 (4 μM,16 h) 在 CLL 细胞中降低 Mcl-1 和 Bcl-xl 水平,触发 CLL 细胞中的 caspase 激活。
ILK-IN-2 (1-4 μM,15 min) 在 Mec-1,OSU-CLL 细胞中不影响 AKT 的近端膜信号传导。
ILK-IN-2 (0-5 μM,24 h) 抑制前列腺癌和乳腺癌细胞系增殖,对 LNCaP,PC-3,MDA-MB-231,MDA-MB-468,SKBR3,MCF-7 的 IC50 分别为 1.6,2,1,1.5,1.8,2.5 μM,而正常上皮细胞不受影响。
ILK-IN-2 (0-4 μM,24 h) 在 PC3,MDA-MB-231 中抑制 PDK2,是通过对 Ser-473 位点 Akt 磷酸化的抑制。
ILK-IN-2 (0-4 μM,24 h) 通过细胞自噬和凋亡导致 PC-3 细胞死亡。

Cell Viability Assay

Cell Line: Mec-1, OSU-CLL, B cell, T cell
Concentration: 0, 2, 4, 6, 8, 10 μM; 0, 1, 2, 3, 4, 5 μM
Incubation Time: 24 h
Result: Had dose-dependent cytotoxicity against CLL cells, while its cytotoxicity was reduced in normal T cells and B cells.

Apoptosis Analysis

Cell Line: CLL
Concentration: 4 μM
Incubation Time: 16 h
Result: Reversed the elevated levels of Mcl-1, significantly enhancing caspase 3/7 activity.

Western Blot Analysis

Cell Line: Mec-1, OSU-CLL
Concentration: 1, 2, 3, 4 μM
Incubation Time: 15 min
Result: Did not disrupt PDK1 phosphorylation, PI3 kinase activity or the activity of Ras interactions with proto-oncogene serine/threonine protein kinases.

Western Blot Analysis

Cell Line: PC3, MDA-MB-231
Concentration: 0, 1, 2, 3, 4 μM; 0, 0.5, 1, 1.5, 2, 2.5 μM
Incubation Time: 24 h
Result: Showed dose-dependent inhibition of Akt phosphorylation.

Apoptosis Analysis

Cell Line: PC-3
Concentration: 0, 1, 2, 3, 4 μM
Incubation Time: 24 h
Result: Induced cell apoptosis and autophagy simultaneously, and autophagy occured before cell apoptosis.
体内研究
(In Vivo)

ILK-IN-2 (25-50 mg/kg,口服或腹腔注射,每天一次,2-4 周) 延缓小鼠白血病进展,并显著提高携带 TCL1 白血病细胞的小鼠的总生存率。
ILK-IN-2 (25-50 mg/kg,口服,每天,35 天) 抑制裸鼠 PC-3 异种移植瘤的生长。

Animal Model: Pharmacokinetic properties of OSU-T315
Dosage: 50 mg/kg, daily for 4 weeks; 25 mg/kg, once daily for 2 weeks
Administration: Oral; Intraperitoneal injection (i.p.)
Result: Reduced white blood cell count and prolonged the survival of mice.
Animal Model: PC-3 tumor xenograft mice model
Dosage: 25, 50 mg/kg; daily; 35 days
Administration: Oral
Result: Significantly inhibited tumor growth (25 and 50 mg/kg groups inhibited 48% and 62% respectively).
Showed that the phosphorylation of Ser-473-Akt was dose-dependently inhibited, while the phosphorylation of Thr-308-Akt was not affected. At the same time, the phosphorylation levels of GSK3β and MLC and the expression levels of YB-1, HER2 and EGFR also appeared in parallel decline.
性状 固体
颜色 White to light yellow

化学信息

分子量 533.59
分子式 C30H30F3N5O
CAS No. 1333146-24-9
别名 OSU-T315 analog

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 1 mg/mL (1.87 mM), Sonication is recommended.
10% DMSO+90% Saline: 5.88 mg/mL (11.02 mM), Suspension.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 2 years
-20°C 1 year
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 50 mg/mL (93.70 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.8741 mL9.3705 mL18.7410 mL46.8524 mL
5 mM0.3748 mL1.8741 mL3.7482 mL9.3705 mL
10 mM0.1874 mL0.9370 mL1.8741 mL4.6852 mL
15 mM0.1249 mL0.6247 mL1.2494 mL3.1235 mL
20 mM0.0937 mL0.4685 mL0.9370 mL2.3426 mL
25 mM0.0750 mL0.3748 mL0.7496 mL1.8741 mL
30 mM0.0625 mL0.3123 mL0.6247 mL1.5617 mL
40 mM0.0469 mL0.2343 mL0.4685 mL1.1713 mL
50 mM0.0375 mL0.1874 mL0.3748 mL0.9370 mL
60 mM0.0312 mL0.1562 mL0.3123 mL0.7809 mL
80 mM0.0234 mL0.1171 mL0.2343 mL0.5857 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 2 years; -20°C, 1 year。-80°C储存时,请在2年内使用, -20°C储存时,请在1年内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础