Adenosine receptor antagonist 6

Adenosine receptor antagonist 6 是一种具有口服活性且选择性的 A2A 腺苷受体(A2A adenosine receptor,A2AAR)拮抗剂,Ki 值为 19.18 nM,其与 A2A adenosine receptor 结合后可抑制 5’-N-ethylcarboxamide adenosine(NECA)(MS-E95617)介导的 cAMP 产生(IC50 = 0.089 μM)和免疫抑制,同时促进 IL-2 和 IFN-γ 的分泌,消除腺苷对 T 细胞活化和细胞因子释放的免疫抑制作用,并抑制 CT26/MC38 异种移植模型中的肿瘤生长,因此可用于结肠癌的研究。
产品编号: MS-S97336 CAS No.: 2913578-04-6 分子式: C18H16N6O 分子量: 332.36
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Adenosine receptor antagonist 6 是一种具有口服活性且选择性的 A2A 腺苷受体(A2A adenosine receptor,A2AAR)拮抗剂,Ki 值为 19.18 nM,其与 A2A adenosine receptor 结合后可抑制 5’-N-ethylcarboxamide adenosine(NECA)(MS-E95617)介导的 cAMP 产生(IC50 = 0.089 μM)和免疫抑制,同时促进 IL-2 和 IFN-γ 的分泌,消除腺苷对 T 细胞活化和细胞因子释放的免疫抑制作用,并抑制 CT26/MC38 异种移植模型中的肿瘤生长,因此可用于结肠癌的研究。

生物实验数据

生物活性 Adenosine receptor antagonist 6 is an orally active and selective A2A adenosine receptor (A2AAR) antagonist with a Ki of 19.18 nM that, upon binding to the A2A adenosine receptor, inhibits 5’-N-ethylcarboxamide adenosine (NECA) (MS-E95617)-mediated cAMP production (IC50 = 0.089 μM) and immunosuppression while promoting IL-2 and IFN-γ secretion, abolishes the immunosuppressive effects of adenosine on T cell activation and cytokine release, suppresses tumor growth in CT26/MC38 xenograft models, and can therefore be used for the study of colon cancer.
IC50 & Target

A1

392.23 nM (Ki)

A2B

2129 nM (Ki)

A3

9036 nM (Ki)

体外研究
(In Vitro)

Adenosine receptor antagonist 6 (Compound 11a) (0.001-100 μM) 在活化的原代人外周血单核细胞 (PBMCs) 中以剂量依赖性抑制 NECA 介导的 cAMP 产生,IC50 为 0.089 μM。
Adenosine receptor antagonist 6 (0.1-10 μM) 在活化的原代人外周血单核细胞 (PBMCs) 中消除腺苷对 T 细胞活化和细胞因子释放的免疫抑制作用。
Adenosine receptor antagonist 6 (0.03-3 μM) 在活化的原代人外周血单核细胞 (PBMCs) 中抑制 5’-N-乙基羧酰胺腺苷 (NECA) (MS-E95617) 介导的免疫抑制,并恢复 IL-2 和 IFN-γ 的分泌。
Adenosine receptor antagonist 6 (0.8125-50 μM, 48 h) 抑制 HCT116 细胞 (IC50 = 17.21 μM)、MDA-MB-231 细胞 (IC50 = 53.77 μM)、MC38 细胞 (IC50 = 18.91 μM) 和 CT26 细胞 (IC50 = 19.36 μM) 的增殖。
Adenosine receptor antagonist 6 对 CYP450 酶的代谢清除率较低,其中 CYP1A2 在其立体选择性代谢中起主要作用。

体内研究
(In Vivo)

Adenosine receptor antagonist 6 (Compound 11a) (15-25 mg/kg, 口服给药,每日一次,19-21 天) 在单独使用或与 PD-L1 单克隆抗体联合使用时,抑制 CT26/MC38 异种移植模型中的肿瘤生长。

Animal Model: CT26 cancer cells (5 × 105 in 100 μL) were injected subcutaneously into both flanks of BALB/c mice
Dosage: 25 mg/kg
Administration: p.o. once daily for 19 days
Result: Demonstrated a tumor growth inhibition rate (TGI) of 37%.
Exhibited significant enhancement of efficacy (TGI = 92%) when combined with PD-L1 monoclonal antibody (10 mg/kg, i.p., b.i.w.).
Animal Model: MC38 cancer cells (5 × 105 in 100 μL) were injected subcutaneously into both flanks of C57BL/6 mice
Dosage: 15 mg/kg
Administration: p.o. once daily for 21 days
Result: Demonstrated a tumor growth inhibition rate (TGI) of 69.74%.
Exhibited significant enhancement of efficacy (TGI = 98.1%) when combined with PD-L1 monoclonal antibody (10 mg/kg, i.p., b.i.w.).

化学信息

分子量 332.36
分子式 C18H16N6O
CAS No. 2913578-04-6

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础