PI3Kδ/HDAC6-IN-1

PI3Kδ/HDAC6-IN-1(Compound 22E)是一种口服有效的 PI3Kδ 和 HDAC6 双重抑制剂,IC50 值分别为 2.4 nM 和 6.2 nM,对非霍奇金淋巴瘤 (NHL) 细胞表现出强大的抗增殖作用,并具有体内抗肿瘤活性且无明显毒性,可将细胞周期阻滞于 G0/G1 期并诱导细胞凋亡 (apoptosis),同时阻断 PI3K/AKT/mTOR 信号通路并增加 α-微管蛋白和组蛋白 H3 的乙酰化水平。
产品编号: MS-S85629 CAS No.: 3075011-99-0 分子式: C34H38N10O4 分子量: 650.73
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PI3Kδ/HDAC6-IN-1(Compound 22E)是一种口服有效的 PI3Kδ 和 HDAC6 双重抑制剂,IC50 值分别为 2.4 nM 和 6.2 nM,对非霍奇金淋巴瘤 (NHL) 细胞表现出强大的抗增殖作用,并具有体内抗肿瘤活性且无明显毒性,可将细胞周期阻滞于 G0/G1 期并诱导细胞凋亡 (apoptosis),同时阻断 PI3K/AKT/mTOR 信号通路并增加 α-微管蛋白和组蛋白 H3 的乙酰化水平。

生物实验数据

生物活性 PI3Kδ/HDAC6-IN-1 (Compound 22E) is an orally effective dual inhibitor of PI3Kδ and HDAC6 with IC50 values of 2.4 nM and 6.2 nM, respectively, exhibits potent antiproliferative effects against non-Hodgkin lymphoma (NHL) cells along with in vivo antitumor activity without obvious toxicity, induces cell cycle arrest at G0/G1 phase and apoptosis, and blocks the PI3K/AKT/mTOR signaling pathway while increasing the acetylation levels of α-tubulin and histone H3.
IC50 & Target PI3Kδ:2.4 nM
体外研究
(In Vitro)

PI3Kδ/HDAC6-IN-1 (Compound 22E) (浓度为 0.1 nM -10 μM,24-120 小时) 对 PI3Kδ 和 HDAC6 均有抑制活性,IC50 分别为 2.4 nM 和 6.4 nM,并对 JEKO-1 细胞表现出抗增殖活性。

PI3Kδ/HDAC6-IN-1 (浓度为 10-30 μM,45-85 °C) 可提高 PI3Kδ 和 HDAC6 的热稳定性。

PI3Kδ/HDAC6-IN-1 (浓度为 0.1-10 μM, 4 天) 抑制 NHL 细胞的增殖,IC50 值分别为 34 nM (SU-DHL-6 细胞) 和 53 nM (JEKO-1细胞)。

PI3Kδ/HDAC6-IN-1 (.3-9 μM,24 小时) 可诱导 SU-DHL-6 和 JEKO-1 细胞发生 G0/G1 期阻滞。

PI3Kδ/HDAC6-IN-1 (3-9 μM,72 小时) 可诱导 SU-DHL-6 和 JEKO-1 细胞发生浓度依赖性的细胞凋亡 (Annexin V 阳性)。

PI3Kδ/HDAC6-IN-1 (3-9 μM,12 小时) 在细胞水平上抑制 SU-DHL-6 和 JEKO-1 细胞中的 PI3K 和 HDAC 相关蛋白。

Cell Cycle Analysis

Cell Line: SU-DHL-6 and JEKO-1 cells
Concentration: 0.3 μM, 1 μM, 3 μM, 9 μM
Incubation Time: 24 h
Result: Increased the ratio of cells in G0/G1 phase, blocked cancer cells in the G0/G1 phase.
Downregulated cyclin D1, cyclin E1, CDK6, CDK4, and CDK2 proteins.

Apoptosis Analysis

Cell Line: SU-DHL-6 and JEKO-1 cells
Concentration: 0.3 μM, 1 μM, 3 μM, 9 μM
Incubation Time: 72 h
Result: Induced Annexin V positivity, downregulated the anti-apoptotic protein BCL-2, increased levels of cleaved PARP and cleaved caspase-3.
Induced a concentration-dependent increase in the ROS-positive cell count in JEKO-1 cells.

Western Blot Analysis

Cell Line: SU-DHL-6 and JEKO-1 cells
Concentration: 0.3 μM, 1 μM, 3 μM, 9 μM
Incubation Time: 12 h
Result: Inhibited hosphorylation of downstream signaling proteins of PI3K, including AKT, P70S6K, and 4EBP1, as well as the oncogene-encoded protein c-MYC, while having no effect on total protein levels.
Increased histone H3 and α-tubulin acetylation levels.
体内研究
(In Vivo)

PI3Kδ/HDAC6-IN-1 (Compound 22E) (25 mg/kg,口服,每日一次,21 天) 具有抗肿瘤潜力,可抑制 NOD-SCID 小鼠 SU-DHL-6 和 JEKO-1 肿瘤异种移植模型中的 PI3K 通路和 HDAC 相关蛋白。

Animal Model: SU-DHL-6 and JEKO-1 tumor xenograft models in NOD-SCID mice
Dosage: 25 mg/kg
Administration: p.o., 21 days
Result: Reduced tumor growth, exhibited antitumor activity, with corresponding TGI rates of 69.42 % in the SU-DHL-6 model and 67.56 % in the JEKO-1 model.
Reduced p-AKT levels and increased acetyl-α-tubulin levels, reduced Ki-67 levels and increased cleaved caspase-3 levels.

化学信息

分子量 650.73
分子式 C34H38N10O4
CAS No. 3075011-99-0

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础