3,5-Diiodothyropropionic acid

3,5-Diiodothyropropionic acid 是一种甲状腺激素类似物,可诱导 α-肌球蛋白重链 mRNA 表达,与甲状腺激素受体 (TR) 结合(对 TRα1 和 TRβ1 的结合常数 Ka 分别为 2.40 和 4.06 M-1),在三维人体皮肤微血管内皮细胞发芽实验中促进血管生成,在甲状腺切除的大鼠中可防止心肌小动脉丢失,并在心梗后心力衰竭大鼠中增强心脏能量生成能力,因此可用于血管生成和心力衰竭相关研究。
产品编号: MS-S54831 纯度: 98.34% CAS No.: 1158-10-7 分子式: C15H12I2O4 分子量: 510.06
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
询价
50mg
询价
询价

产品描述

3,5-Diiodothyropropionic acid 是一种甲状腺激素类似物,可诱导 α-肌球蛋白重链 mRNA 表达,与甲状腺激素受体 (TR) 结合(对 TRα1 和 TRβ1 的结合常数 Ka 分别为 2.40 和 4.06 M-1),在三维人体皮肤微血管内皮细胞发芽实验中促进血管生成,在甲状腺切除的大鼠中可防止心肌小动脉丢失,并在心梗后心力衰竭大鼠中增强心脏能量生成能力,因此可用于血管生成和心力衰竭相关研究。

生物实验数据

生物活性 3,5-Diiodothyropropionic acid is a thyroid hormone analog that induces α-myosin heavy chain mRNA expression, binds to thyroid hormone receptor (TR) with association constants (Ka) of 2.40 and 4.06 M-1 for TRα1 and TRβ1, respectively, promotes angiogenesis in a three-dimensional human dermal microvascular endothelial cell sprouting assay, prevents myocardial arteriolar loss in thyroidectomized rats, and enhances cardiac energy production capacity in rats with heart failure after myocardial infarction, and thus can be used in research related to angiogenesis and heart failure.
体外研究
(In Vitro)

3,5-Diiodothyropropionic (0.1 μM) 在三维人皮肤微血管内皮细胞出芽实验中促进血管生成,使迁移细胞增加 2.1 倍,微血管长度增加 2.0 倍。
3,5-Diiodothyropropionic (0.1 mM,3 天) 在 10 天龄鸡胚尿囊膜上刺激血管生成。

体内研究
(In Vivo)

3,5-Diiodothyropropionic (80 mg/60-day release pellets,通过皮下缓释颗粒,6 周) 防止甲状腺切除大鼠的心肌小动脉丢失。
3,5-Diiodothyropropionic (375 μg/100 g,皮下注射,每日一次,10 天) 提高心脏的能量生成能力,并使心梗后心力衰竭大鼠中大多数下调的代谢基因恢复至接近正常水平。
3,5-Diiodothyropropionic (375 μg/100 g,皮下注射,每日一次,10 天,结合 Captopril (MS-Q24704) 2 g/L 饮用水,21 天) 提高心脏的能量生成能力,与单独使用相比,使心梗后心力衰竭大鼠中更多基因恢复至接近正常水平。

Animal Model: Thyroidectomized male Sprague-Dawley rats (10.5 weeks old)
Dosage: 80 mg/60-day release pellets
Administration: Via subcutaneous slow-release pellets for 6 weeks
Result: Prevented a 31% reduction in myocardial arteriolar length density in thyroidectomized Sprague-Dawley rats, with the 5-15 μm arterioles well preserved.
Failed to prevent hypothyroidism-induced decreases in body temperature, body weight gain, heart weight and heart weight-to-body weight ratio.
Did not improve cardiac function parameters including posterior wall thickness, fractional shortening, +dP/dt, -dP/dt, and heart rate.
Increased serum triiodothyronine (T3) levels but kept serum thyroxine (T4) levels as low as the placebo group.
Animal Model: Adult male Spraque-Dawley rats (175-275 g) were anesthetized with methoxyflurane, subjected to left thoracotomy, and a ligature was placed around the proximal left coronary artery to induce myocardial infarction
Dosage: 375 μg/100 g
Administration: Subcutaneous injection once daily for 10 days
Result: Reversed the downregulation of most metabolic genes.
Restored the energy-generating capacity of the heart.
Improved cardiac function as evidenced by reduced left ventricular end-diastolic pressure.
Animal Model: Adult male Spraque-Dawley rats (175-275 g) were anesthetized with methoxyflurane, subjected to left thoracotomy, and a ligature was placed around the proximal left coronary artery to induce myocardial infarction
Dosage: 375 μg/100 g
Administration: Subcutaneous injection once daily for 10 days, with Captopril (MS-Q24704) 2 g/L in drinking water for 21 days
Result: Reversed the downregulation of metabolic enzymes.
Restored the energy-generating capacity of the heart.
Improved cardiac function as evidenced by more genes returning toward normal compared to used alone.
性状 固体
颜色 White to off-white

化学信息

分子量 510.06
分子式 C15H12I2O4
CAS No. 1158-10-7

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 10.00 mg/mL (19.61 mM), Solution.
10% DMSO+90% Saline: < 10 mg/mL (19.61 mM), Lower concentrations may be soluble, but exact solubility limit is unknown.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式
Powder -20°C 3 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 50 mg/mL (98.03 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.9606 mL9.8028 mL19.6055 mL49.0138 mL
5 mM0.3921 mL1.9606 mL3.9211 mL9.8028 mL
10 mM0.1961 mL0.9803 mL1.9606 mL4.9014 mL
15 mM0.1307 mL0.6535 mL1.3070 mL3.2676 mL
20 mM0.0980 mL0.4901 mL0.9803 mL2.4507 mL
25 mM0.0784 mL0.3921 mL0.7842 mL1.9606 mL
30 mM0.0654 mL0.3268 mL0.6535 mL1.6338 mL
40 mM0.0490 mL0.2451 mL0.4901 mL1.2253 mL
50 mM0.0392 mL0.1961 mL0.3921 mL0.9803 mL
60 mM0.0327 mL0.1634 mL0.3268 mL0.8169 mL
80 mM0.0245 mL0.1225 mL0.2451 mL0.6127 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础