Aspirin lithium

Synonyms: Acetylsalicylic acid lithium; ASA lithium
Aspirin (Acetylsalicylic Acid) lithium 是一种口服有效的不可逆环氧合酶 COX-1 和 COX-2 抑制剂(IC50 分别为 5 和 210 μg/mL),可诱导细胞凋亡 (apoptosis)、抑制 NF-κB 活化,并通过抑制血小板前列腺素合成酶 (prostaglandin synthetase) 预防冠状动脉和脑血管血栓形成。
产品编号: MS-S49730 CAS No.: 552-98-7 分子式: C9H7LiO4 分子量: 186.09
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Aspirin (Acetylsalicylic Acid) lithium 是一种口服有效的不可逆环氧合酶 COX-1 和 COX-2 抑制剂(IC50 分别为 5 和 210 μg/mL),可诱导细胞凋亡 (apoptosis)、抑制 NF-κB 活化,并通过抑制血小板前列腺素合成酶 (prostaglandin synthetase) 预防冠状动脉和脑血管血栓形成。

生物实验数据

生物活性 Aspirin (Acetylsalicylic Acid) lithium is an orally active irreversible inhibitor of cyclooxygenase COX-1 and COX-2 (IC50: 5 and 210 μg/mL, respectively) that induces apoptosis, inhibits NF-κB activation, and also inhibits platelet prostaglandin synthetase, thereby preventing coronary and cerebrovascular thrombosis.
IC50 & Target

COX-1

 

COX-2

 

体外研究
(In Vitro)

Aspirin lithium 抑制人关节软骨细胞中的 COX-1 和 COX-2,IC50 值分别为 3.57 μM 和 29.3 μM。
Aspirin acetylates COX-1 的丝氨酸 530,从而阻断血小板中血栓素 A 的合成,减少血小板聚集。
Aspirin lithium 通过干扰 CCAAT/增强子结合抑制 COX-2 蛋白表达蛋白质 beta (C/EBPbeta) 与其在 COX-2 启动子/增强子上的同源位点。
Aspirin lithium 抑制 NF-κB 依赖性转录自 lgκ 增强子和人类免疫缺陷病毒 (HIV) 转染 T 细胞中的长末端重复序列 (LTR)。
Aspirin lithium 通过激活半胱天冬酶、激活 p38 MAP 激酶、释放线粒体细胞色素 c、和神经酰胺途径的激活。

体内研究
(In Vivo)

注意:
请勿仅参考一篇文章来确定实验条件。建议在正式实验前,通过预实验确定最佳实验条件 (动物品系、年龄、剂量、频率及周期、检测时间及指标等)。

Aspirin lithium (5-150 mg/kg,口服,一次) 对成年酵母菌发热雄性大鼠表现出显著的解热活性。
Aspirin 可用于诱导胃肠溃疡模型。

诱导胃肠溃疡模型
致病原理
Aspirin 可抑制动物内源性前列腺素(PG)的合成。Aspirin 还能溶解粘膜上皮细胞的磷脂,导致粘膜通透性增加。
具体造模方法:
小鼠:白化病小鼠 • 雄性 • 6 周龄
给药方式:500 mg/kg • oral • 单剂量
造模成功指标
组织学改变: 造成表皮上皮细胞的侵蚀。
导致粘膜厚度减少。
无COX-1反应诱发溃疡。

Animal Model: Male albino Charles River rats (200-250 g, 8 animals/group, fever was induced by 20 mL/kg of a 20% aqueous suspension of brewer’s yeast which was injected SC in the back below the nape of the neck)
Dosage: 5, 25, 50, 100 and 150 mg/kg
Administration: PO, once
Result: Produced a statistically significant decrease of 0.23°C at 15 min post-drug at the dose of 150 mg/kg. Antipyretic effect gradually increased in magnitude until a peak effect of 1.96 °C was reached at 120 min post-drug. The ED50 of aspirin was found to be 10.3 mg/kg with confidence limits of 1.8-23.0 mg/kg. The antipyretic response to aspirin is dependent on the dose of the compound administered.
Animal Model: Albino male mice
Dosage: 500 mg/kg, single dose
Administration: oral
Result: Caused erosion of the surface epithelial cells.
Resulted in a decrease in the mucosal thickness.
Induced ulcer without COX-1 reaction.

化学信息

分子量 186.09
分子式 C9H7LiO4
CAS No. 552-98-7
别名 Acetylsalicylic acid lithium; ASA lithium

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础