| 生物活性 | ENMD-2076 Tartrate is a multi-target kinase inhibitor with IC50 values of 1.86, 14, 58.2, 15.9, 92.7, 70.8, 20.2 and 56.4 nM for Aurora A, Flt3, KDR/VEGFR2, Flt4/VEGFR3, FGFR1, FGFR2, Src and PDGFRα, respectively. |
| IC50 & Target | FGFR1:92.7 nM, FGFR2:70.8 nM, FLT4:15.9 nM, Flt3:14 nM, Aurora A:1.86 nM, PDGFRα:56.4 nM, KDR:58.2 nM |
| 体外研究 (In Vitro) |
ENMD-2076 is selective toward Aurora A versus Aurora B (IC50=350 nM). ENMD-2076 inhibits HUVEC growth with an IC50 value of 0.15 mM. Against 10 human leukemia cell lines, the IC50 values range from 0.025 to 0.53 mM. Within this panel, MV4:11 cells are the most sensitive cells by a factor of greater than 4. The lymphoma-derived U937 cell line treated with ENMD-2076 shows that the ENMD-2076 induces a dose-dependent increase in G2-M-phase arrest as well as the induction of apoptosis. ENMD-2076 inhibits cellular Flt3 ligand (FL)-induced Flt3 autophosphorylation in THP-1 cells, which have been shown to express FL-responsive wild-type Flt- 3 (18) with an IC50 value of 28 nM. ENMD-2076 inhibits stem cell factor (SCF)-induced Kit autophosphorylation in MO7e cells with an IC50 value of 40 nM. ENMD-2076 inhibits VEGFR2/KDR autophosphorylation with an IC50 value of 7 nM. |
| 体内研究 (In Vivo) |
ENMD-2076 treatment results in statistically significant, dose dependent inhibition of tumor growth or tumor regression. Moreover, there is no correlation between tumor growth rate and antitumor efficacy, which would conceivably be expected for a mitotic kinase inhibitor, as fast growing (e.g., A375 melanoma) and slow-growing (e.g., HT29 colon carcinoma) tumors are similarly inhibited by ENMD-2076. ENMD-2076 is well tolerated at daily doses up to 302 mg/kg (equivalent to 200 mg/kg of the free base), with no weight loss or signs of morbidity noted in any study at this dose with the exception of the A375 model. |
| 性状 | 固体 |
| 颜色 | Light brown to khaki |
| 分子量 | 525.56 |
| 分子式 | C25H31N7O6 |
| CAS No. | 1453868-32-0 |
| 储存方式 | 4°C, sealed storage, away from moisture *In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture) |
|||||||||||||||||||||||||||||||||||||||||||||||
| 运输条件 | Room temperature in continental US; may vary elsewhere. | |||||||||||||||||||||||||||||||||||||||||||||||
|
溶液配制表
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
DMSO 中的溶解度 : 25 mg/mL (47.57 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)
* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。
|
||||||||||||||||||||||||||||||||||||||||||||||||
请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。
母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。
体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清
以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。
方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。
计算结果:
工作液浓度: mg/ml;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。
1. 首先保证母液是澄清的;
2.
一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。