Necroptosis inducer 1

Necroptosis inducer 1 是一种坏死性凋亡 (Necroptosis) 诱导剂,可抑制硫氧还蛋白还原酶 (TrxR) 活性、提升细胞内 ROS 水平,从而触发 ROS 介导的坏死性凋亡并诱导依赖坏死性凋亡的免疫原性细胞死亡,进而抑制肿瘤生长、重塑肿瘤免疫微环境,且在动物模型中与 anti-PD-1 具有协同作用,可用于结肠癌的研究。
Necroptosis inducer 1
产品编号: MS-R77327 分子式: C25H28AuF6N2O2PS2 分子量: 794.56
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Necroptosis inducer 1 是一种坏死性凋亡 (Necroptosis) 诱导剂,可抑制硫氧还蛋白还原酶 (TrxR) 活性、提升细胞内 ROS 水平,从而触发 ROS 介导的坏死性凋亡并诱导依赖坏死性凋亡的免疫原性细胞死亡,进而抑制肿瘤生长、重塑肿瘤免疫微环境,且在动物模型中与 anti-PD-1 具有协同作用,可用于结肠癌的研究。

生物实验数据

生物活性 Necroptosis inducer 1 is a necroptosis inducer that inhibits thioredoxin reductase (TrxR) activity, elevates intracellular ROS levels, triggers ROS-mediated necroptosis, and induces necroptosis-dependent immunogenic cell death, thereby inhibiting tumor growth, remodeling the tumor immune microenvironment, and exerting synergistic effects with anti-PD-1 in animal models, and it can be used for research on colon cancer.
体外研究
(In Vitro)

Necroptosis inducer 1 (Compound Au-1) (48 h) 在多种癌细胞系中表现出强细胞毒性,对 CT-26 细胞的活性最强 (IC50 = 1.03 μM)。
Necroptosis inducer 1 (0.5-2 μM; 24-48 h) 可在体外以浓度和时间依赖的方式抑制 CT-26 细胞中的 TrxR 活性。
Necroptosis inducer 1 (0.5-2 μM; 24 h) 可在 CT-26 细胞中诱导浓度依赖性的细胞内 ROS 积累。
Necroptosis inducer 1 (0.5-4 μM; 24-48 h) 可触发 ROS 介导的坏死性凋亡,作为 CT-26 细胞中占主导地位的细胞死亡途径,其特征为坏死性凋亡相关蛋白上调、Annexin V−/PI+细胞增加、PI 摄取及 LDH 释放。
Necroptosis inducer 1 (1-2 μM; 24 h) 可在 CT-26 细胞中诱导坏死性凋亡依赖性的免疫原性细胞死亡 (ICD),其特征为呈浓度依赖性的胞外钙网蛋白 (ecto-CRT) 暴露、ATP 释放以及 HMGB1 释放。

体内研究
(In Vivo)

Necroptosis inducer 1 (Compound Au-1) (10 mg/kg; i.v.; 两次; 每次间隔 48 小时) 对原位 CT-26 肿瘤的肿瘤生长抑制率 (IRT) 达 74.2%,对远端 CT-26 肿瘤的 IRT 达 83.9%,同时维持小鼠体重。
Necroptosis inducer 1 (10 mg/kg; i.v.; 每隔两天一次共 24 天) 给药后 IRT 达 43.1%,与抗 PD-1 联合用药时的 IRT 达 66.2%;可通过激活 CD8+ 和 CD4+ 辅助 T 细胞、减少调节性 T 细胞来重塑肿瘤免疫微环境,同时维持小鼠体重。

Animal Model: BALB/c (4-week-old, sex not specified, subcutaneously inoculated with CT-26 cells to establish primary and distant tumors)
Dosage: 10 mg/kg
Administration: i.v.; twice with 48-hour interval
Result: Achieved a 74.2% inhibition rate of tumor growth (IRT) in primary tumors.
Achieved an 83.9% IRT in distant tumors.
Maintained stable body weight throughout the treatment period.
Animal Model: BALB/c (4-week-old, sex not specified, subcutaneously inoculated with CT-26 cells to establish tumors reaching ~50 mm3)
Dosage: 10 mg/kg
Administration: i.v.; every 48 hours
Result: Achieved a 43.1% IRT as monotherapy.
Achieved a 66.2% IRT in combination with anti-PD-1.
Maintained stable body weight throughout the treatment period.
Increased tumor-infiltrating CD3+CD8+ T cells from 0.83% to 3.57%.
Increased proportions of CD3+CD8+CD38+ T cells from 10.03% to 37.68% and CD3+CD8+Ki67+ T cells from 30.44% to 48.20%.
Increased percentages of CD8+ T cells expressing TNF-α to 17.66%, IFN-γ to 38.00%, and granzyme B to 23.64%.
Increased tumor-infiltrating CD3+CD4+ T cells from 0.79% to 5.25%.
Increased helper T (CD4+CD185+) cells from 7.63% to 18.18%.
Decreased immunosuppressive regulatory T (CD3+CD4+Foxp3+) cells from 18.83% to 8.60%.
Observed elevated CD3+CD8+ T cell infiltration in spleens, lymph nodes, and peripheral blood.

化学信息

分子量 794.56
分子式 C25H28AuF6N2O2PS2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础