HDAC8-IN-14 是一种姜黄素衍生物,也是一种选择性 HDAC8 抑制剂(Ki 值为 9 nM),可诱导活性氧 (ROS) 的产生、破坏线粒体膜电位并促进细胞凋亡 (apoptosis),显著促进细胞在亚 G0/G1 期积累(这与细胞凋亡 (apoptosis) 或坏死 (necroptosis) 相符),并诱导细胞色素 c (cytochrome c)、裂解型 caspase-3 和促凋亡蛋白 Bak 的表达上调,而抗凋亡蛋白 Bcl-2 的水平保持不变,可用于白血病的研究。
HDAC8-IN-14
产品编号: MS-R74281 分子式: C37H27Cl2N5O 分子量: 628.55
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

HDAC8-IN-14 是一种姜黄素衍生物,也是一种选择性 HDAC8 抑制剂(Ki 值为 9 nM),可诱导活性氧 (ROS) 的产生、破坏线粒体膜电位并促进细胞凋亡 (apoptosis),显著促进细胞在亚 G0/G1 期积累(这与细胞凋亡 (apoptosis) 或坏死 (necroptosis) 相符),并诱导细胞色素 c (cytochrome c)、裂解型 caspase-3 和促凋亡蛋白 Bak 的表达上调,而抗凋亡蛋白 Bcl-2 的水平保持不变,可用于白血病的研究。

生物实验数据

生物活性 HDAC8-IN-14 is a curcumin derivative and a selective HDAC8 inhibitor with a Ki value of 9 nM that induces reactive oxygen species (ROS) production, disrupts mitochondrial membrane potential, and promotes apoptosis, significantly promotes cell accumulation in the sub-G0/G1 phase, which is consistent with apoptosis or necroptosis, and induces upregulation of cytochrome c, cleaved caspase-3, and the pro-apoptotic protein Bak while the level of the anti-apoptotic protein Bcl-2 remains unchanged, and can be used for leukemia research.
IC50 & Target

HDAC8

9 nM (Ki)

Caspase-3

 

体外研究
(In Vitro)

HDAC8-IN-14 (Compound 5e) (0.1-100 μM,48 小时) 在 MOLT-4 细胞中表现出较低的值 (IC50 = 90 nM),在 EL-4 细胞中 IC50 值为 1.98 μM,在 YAC-1 细胞中为 1.17 μM,在 L1210 细胞中为 18.94 μM,而在非癌性 HEK-293 细胞系中则表现出显著更高的值 (IC50 = 39.20 μM),表明其在有效浓度下对非癌细胞具有选择性和安全性。
HDAC8-IN-14 (100 nM,30 分钟) 在 MOLT-4 细胞中显示出显著的 ROS 诱导作用,该作用通过荧光染料 H2DCFDA (MS-F61126) 进行检测。
HDAC8-IN-14 (48 小时) 可诱导线粒体去极化,表现为 JC-1 荧光强度的变化;可触发细胞凋亡 (约 10%) 和坏死 (约 30%);并导致细胞周期阻滞,其特征是亚 G0 期凋亡细胞比例增加 20%,同时 G0/G1 期和 G2/M 期细胞比例减少,S 期细胞比例略有增加。
HDAC8-IN-14 (50-100 nM,48 小时) 可显著上调细胞色素 c、裂解型 caspase-3 和促凋亡蛋白 Bak 的表达,而抗凋亡蛋白 Bcl-2 的水平保持不变,表明其在 MOLT-4 细胞中通过一种不依赖于 Bcl-2 的机制激活内源性凋亡途径。

Western Blot Analysis

Cell Line: MOLT-4 cells
Concentration: 50 nM, 100 nM
Incubation Time: 48 h
Result: Induced a significant upregulation of cytochrome c, cleaved caspase-3, and the pro-apoptotic protein Bak while leaving the anti-apoptotic Bcl-2 levels unaltered.
体内研究
(In Vivo)

HDAC8-IN-14 (50 mg/kg,腹腔注射,每日一次,持续 30 天) 能有效抑制 DLA 小鼠模型中的肿瘤生长,且不表现出明显的全身毒性。

Animal Model: The left thigh of each female Swiss albino mice (6-8 weeks) was injected with 0.5 million DLA cells to induce a tumor.
Dosage: 50 mg/kg
Administration: I.p., once daily for 30 days
Result: Reduced tumor burden compared to the control group.
Resulted in the upregulation of cytochrome c, cleaved caspase 3, and proapoptotic Bax, the levels of the anti-apoptotic Bcl-2 remained unchanged.
Exhibited reduced nuclear density, suggesting decreased tumor cell proliferation.
No significant histopathological alterations were observed in the liver and kidney tissues of treated mice.
Indicated no toxicity to liver function.
The body weight of the animals at the end of the study showed no variation.

化学信息

分子量 628.55
分子式 C37H27Cl2N5O

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础