Ferroptosis inducer-7

Ferroptosis inducer-7 是一种口服有效的选择性铁死亡诱导剂,通过作用于肌醇 1,4,5-三磷酸受体(IP3R)/钙释放激活钙通道蛋白(ORAI)发挥作用,在免疫介导的骨髓衰竭中可缓解贫血症状、抑制骨髓 CTL 激活并改善造血功能,因此可用于再生障碍性贫血的研究。
产品编号: MS-R62825 CAS No.: 2723569-00-2 分子式: C29H31NO6 分子量: 489.56
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Ferroptosis inducer-7 是一种口服有效的选择性铁死亡诱导剂,通过作用于肌醇 1,4,5-三磷酸受体(IP3R)/钙释放激活钙通道蛋白(ORAI)发挥作用,在免疫介导的骨髓衰竭中可缓解贫血症状、抑制骨髓 CTL 激活并改善造血功能,因此可用于再生障碍性贫血的研究。

生物实验数据

生物活性 Ferroptosis inducer-7 is an orally active selective ferroptosis inducer that acts through inositol 1,4,5-trisphosphate receptor (IP3R)/calcium release-activated calcium channel protein (ORAI), and it alleviates anemia symptoms, inhibits bone marrow CTL activation, and improves hematopoietic function in immune-mediated bone marrow failure, thereby making it useful for the study of aplastic anemia.
体外研究
(In Vitro)

Ferroptosis inducer-7 (Compound 3a-M1) (1-10 μM) 显著抑制 BALB/c 小鼠淋巴结中 CD8+ T 细胞的增殖以及 IFN-γ 和 TNF-α 的释放。
Ferroptosis inducer-7 (7.5-480 μM,72 小时) 与其他免疫细胞系相比,表现出对细胞毒性淋巴细胞系-2 (CTLL-2) 的增殖选择性抑制。
Ferroptosis inducer-7 (7.5-30 μM,16 小时) 表明 CTL 功能的抑制是由于用 IL-2 处理的 CTLL-2 中铁死亡的激活所致。
Ferroptosis inducer-7 (10 μM,45 分钟) 可增加 CTL 细胞外由 IP3R /ORAI 钙通道触发的Ca2+ 内流。

Western Blot Analysis

Cell Line: IL-2 stimulated CTLL-2 cell line
Concentration: 7.5-30 μM
Incubation Time: 16 h
Result: Showed a significant increase in the phosphorylation levels of mitogen-activated protein kinase, ERK and p38.
Activated the MEK/ERK and p38 MAPK signaling pathway.

Cell Viability Assay

Cell Line: IL-2 stimulated CTLL-2 cell line
Concentration: 7.5-480 μM
Incubation Time: 72 h
Result: Showed the IC50 of Ferroptosis inducer-7 for IL-2-treated CTLL-2 (37.87 μM) was much lower than that for other immune cell lines, such as THP-1 (124.7 μM), HL-60 (132.6 μM), RAW264.7 (491.8 μM), HepG2 (491.9 μM), NRK-52E (705.1 μM), and IEC-6 (84.29 μM).
体内研究
(In Vivo)

Ferroptosis inducer-7 (10 mg/kg,口服,14 天) 不仅对缓解贫血症状、改善造血功能有显著作用,而且在提高免疫介导的骨髓衰竭 BALB/c 小鼠模型的存活率方面也有优势。
Ferroptosis inducer-7 (5-15 mg/kg,口服,21 天) 可提高 C57BL/6J 小鼠模型中免疫介导的骨髓衰竭模型的存活率、缓解贫血症状、改善造血功能,尤其是在骨髓衰竭早期阶段。
Ferroptosis inducer-7 (5-15 mg/kg,口服,单次给药) 抑制再生障碍性贫血 C57BL/6J 小鼠骨髓中的 T 细胞比例,尤其是 CD8+ 细胞和 CD8+/CD4+ 比率。
Ferroptosis inducer-7 (10 g/kg,口服,单次给药) 在小鼠模型中未引起异常,表明最大耐受剂量超过 10 g/kg。

Animal Model: Immune-mediated bone marrow failure BALB/c mice model
Dosage: 10 mg/kg, 14 d
Administration: Oral gavage (p.o.)
Result: Elevated body weight, peripheral red blood cells, hemoglobin levels, and platelet cells in mice.
Improved histopathological changes in the bone marrow, including increased nucleated cells, a restored nucleated-to-red blood cell ratio and a decrease in abnormal proportion of lymphocytes.
Animal Model: Aplastic anemia C57BL/6J mice
Dosage: 5-15 mg/kg, one single dose
Administration: Oral gavage (p.o.)
Result: Reduced the proportion of effector CD8+ T cells, and increased memory CD8+ T cells.
Suppressed the level of IFN-γ and hyperactivation of CTLs in the bone marrow of AA mice.

化学信息

分子量 489.56
分子式 C29H31NO6
CAS No. 2723569-00-2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础