SphK1-IN-2 是一种有效的选择性 SphK1 抑制剂,对 SphK1 和 SphK2 的 IC50 值分别为 19.81 nM 和 >10 μM,具有抗增殖活性,可诱导细胞周期阻滞和凋亡 (apoptosis),可用于癌症研究。
产品编号: MS-R60091 CAS No.: 3031483-60-7 分子式: C27H30BrNO4S 分子量: 544.50
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

SphK1-IN-2 是一种有效的选择性 SphK1 抑制剂,对 SphK1 和 SphK2 的 IC50 值分别为 19.81 nM 和 >10 μM,具有抗增殖活性,可诱导细胞周期阻滞和凋亡 (apoptosis),可用于癌症研究。

生物实验数据

生物活性 SphK1-IN-2 is a potent and selective SphK1 inhibitor with IC50 values of 19.81 nM and >10 μM for SphK1 and SphK2, respectively, and it exhibits antiproliferative activity, induces cell cycle arrest and apoptosis, and can be used for cancer research.
IC50 & Target

SphK1

19.81 nM (IC50)

SphK2

>10 μM (IC50)

体外研究
(In Vitro)

SphK1-IN-2 (4-24 μM; 72 hours; cancer cell lines) has anti-proliferative activity on cancer cells.
SphK1-IN-2 (10-30 μM; 48 hours; HT-29 cells and MDA-MB-231 cells) induces G0/G1 phase arrest and apoptosis in colon cancer cells.

Cell Viability Assay

Cell Line: HT-29, SW480, MDA-MB231 and MCF-7 cells
Concentration: 4-24 μM
Incubation Time: 72 hours
Result: Had inhibitory activity against HT-29 and MDA-MB-231 with IC50 of 3.85 and 7.14 μM, respectively.

Cell Cycle Analysis

Cell Line: HT-29 cells and MDA-MB-231 cells
Concentration: 10 and 30 μM
Incubation Time: 72 hours
Result: Arrestd cell cycle at G0/G1 phase and reduced the expression of cyclin A, cyclin E1, cyclin D1, and CDK6.

Apoptosis Analysis

Cell Line: HT-29 cells and MDA-MB-231 cells
Concentration: 10 and 30 μM
Incubation Time: 48 hours
Result: Induced cell apoptosis in a dose-dependent manner.
体内研究
(In Vivo)

SphK1-IN-2 (50-100 mg/kg; i.p.; daily; for 14 days; female BALB/c nude mice) inhibits the growth of colon tumors and breast tumors in vivo.
SphK1-IN-2 (2-50 mg/kg; p.o., i.p. and i.v.; female BALB/c nude mice) exhibits a long half-life (T1/2=8.13 h) and high plasma exposure (AUClast = 8061 h*ng/mL).

Animal Model: Female BALB/c nude mice
Dosage: 2, 20 and 50 mg/kg(Pharmacokinetic Analysis)
Administration: Oral administration, intraperitoneal injection and intravenous injection
Result: 1.19
admin. p.o. i.p. i.v.
Tmax (min) 0.83 0.18
Cmax (ng/mL) 171 78582
AUClast (h*ng/mL) 242 8061 408
T1/2 (h) 8.13 4.20 2.23
CL_obs (mL/min/kg) 81.10
F (%) 2.38 79.00
Animal Model: Female BALB/c nude mice
Dosage: 50 and 100 mg/kg
Administration: Intraperitoneal injection; daily; for 14 days
Result: Inhibited the growth of HT29 tumors at a dose of 50 mg/kg and inhibited the growth of MDA-MB-231 breast tumors in a dose-dependent manner.

化学信息

分子量 544.50
分子式 C27H30BrNO4S
CAS No. 3031483-60-7

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础