Alteplase

Synonyms: 阿替普酶; Actilyse; Activase
Alteplase (Actilyse; Activase) 是一种重组制备的组织纤溶酶原激活剂,作为一种溶栓剂,在急性缺血性脑卒中、肺栓塞、急性心肌梗死、导管闭塞等疾病中发挥重要作用,下方产品规格指 Alteplase 有效含量,该产品中 Alteplase 有效含量与总质量的比例为 1:46~1:50,实际比例以批次为准。
产品编号: MS-Q91328 CAS No.: 105857-23-6
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
询价
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价

产品描述

Alteplase (Actilyse; Activase) 是一种重组制备的组织纤溶酶原激活剂,作为一种溶栓剂,在急性缺血性脑卒中、肺栓塞、急性心肌梗死、导管闭塞等疾病中发挥重要作用,下方产品规格指 Alteplase 有效含量,该产品中 Alteplase 有效含量与总质量的比例为 1:46~1:50,实际比例以批次为准。

生物实验数据

生物活性 Alteplase (Actilyse; Activase) is a recombinant tissue plasminogen activator that acts as a thrombolytic agent and plays an important role in conditions such as acute ischemic stroke, pulmonary embolism, acute myocardial infarction, and catheter occlusion; the product specification below refers to the effective Alteplase content, and in this product the ratio of effective Alteplase content to total mass is 1:46–1:50, with the actual ratio subject to the batch.
体外研究
(In Vitro)

Alteplase (8.3 和 250 μg/mL, 12 小时) 在人体胎儿视网膜色素上皮细胞 (hfRPE 细胞) 中显示出显著的活性降低。
Alteplase (8.3 和 250 μg/mL, 0-6 小时) 在 hfRPE 细胞中以时间依赖性的方式显著降低了跨上皮阻力,并诱导细胞死亡。
产品信息
本品辅料含 L-精氨酸、磷酸、聚山梨酯 80 等。

Cell Viability Assay

Cell Line: hfRPE cells
Concentration: 8.3 and 250 μg/mL
Incubation Time: 12 h
Result: Decreased the number of cells that adhered to the cell culture dish, i.e., the number of living cells following treatment of hfRPE cells with 83 μg/ml alteplase for 12 h and 250 μg/ml alteplase for 6 and 12 h.

Immunofluorescence

Cell Line: hfRPE cells
Concentration: 8.3 and 250 μg/mL
Incubation Time: 0-6 h
Result: Increased The number of positive hfRPE cells for both EthD-III and FITC-Annexin V staining.
体内研究
(In Vivo)

Alteplase (0.9-10 mg/kg,静脉注射,发作后 20 到 40 分钟或发作后 180 和 240 分钟) 在血栓栓塞性中风小鼠中中风发作后 (<3 小时) 早期给药时是有益的,但如果延迟给药 (≥3 小时) 则无益。

Animal Model: Mice model of thromboembolic stroke
Dosage: 0.9-10 mg/kg
Administration: i.v., 20 to 40 minutes post ictus or 180 and 240 minutes post ictus
Result: Significantly reduced the final infarct volume in the early stage.
Clinical Trial
NCT NumberSponsorConditionStart DatePhase
NCT04357730Denver Health and Hospital Authority|Genentech, Inc.|University of Colorado, Denver|National Jewish Health|Beth Israel Deaconess Medical Center|Long Island Jewish Medical Center|Scripps Health|St. Mary´s Medical Center|University of Miami|Ben Taub Hospital|The Methodist Hospital Research Institute
Severe Acute Respiratory Syndrome|Respiratory Failure|Acute Respiratory Distress Syndrome
2020-05-14PHASE2
NCT03581877Northwell Health
Pulmonary Embolism|Pulmonary Hypertension|Thromboembolism|Right Ventricular Dysfunction
2019-01-28PHASE4
NCT01576679The Hospital for Sick Children
Intra-abdominal Abscess
2012-03PHASE3
性状 固体
颜色 White to off-white

化学信息

CAS No. 105857-23-6
别名 阿替普酶; Actilyse; Activase

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础