7-Hydroxystaurosporine

Synonyms: UCN-01; KRX-0601
7-Hydroxystaurosporine (UCN-01) 是 Staurosporine (MS-F83766) 的衍生物,是一种具有抗肿瘤活性的选择性蛋白激酶 C (PKC) 抑制剂,可诱导结肠癌和白血病细胞凋亡 (apoptosis) 并抑制其增殖,还能抑制胶质母细胞瘤细胞的侵袭和迁移,在乳腺癌异种移植小鼠模型中显示出抑制活性,可用于结肠癌、乳腺癌、胶质母细胞瘤和白血病的研究。
产品编号: MS-Q83176 纯度: 97.8% CAS No.: 112953-11-4 分子式: C28H26N4O4 分子量: 482.53
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
3-5 天
5mg
询价
询价
10mg
询价
询价
50mg
询价
询价

产品描述

7-Hydroxystaurosporine (UCN-01) 是 Staurosporine (MS-F83766) 的衍生物,是一种具有抗肿瘤活性的选择性蛋白激酶 C (PKC) 抑制剂,可诱导结肠癌和白血病细胞凋亡 (apoptosis) 并抑制其增殖,还能抑制胶质母细胞瘤细胞的侵袭和迁移,在乳腺癌异种移植小鼠模型中显示出抑制活性,可用于结肠癌、乳腺癌、胶质母细胞瘤和白血病的研究。

生物实验数据

生物活性 7-Hydroxystaurosporine (UCN-01), a derivative of Staurosporine (MS-F83766), is a selective protein kinase C (PKC) inhibitor with antitumor activity that induces apoptosis and inhibits the proliferation of colon cancer and leukemia cells, suppresses the invasion and migration of glioblastoma cells, exhibits inhibitory activity in a mouse model of breast cancer xenografts, and can be used for research on colon cancer, breast cancer, glioblastoma, and leukemia.
体外研究
(In Vitro)

7-Hydroxystaurosporine (0-10 μM,1 小时-3 天) 可诱导 HL60、K562 和 HT-29 细胞 DNA 断裂,同时保持细胞膜完整性,并诱导细胞凋亡。
7-Hydroxystaurosporine (3 μM,1-2 天) 可诱导 K562 和 HT29 细胞染色质浓缩和致密微核体的形成。
7-Hydroxystaurosporine (3-10 μM,3 小时-1 天) 可诱导 HL60、K562 和 HT29 细胞细胞收缩、膜起泡、染色质浓缩和核碎裂。
7-Hydroxystaurosporine (3-10 μM,0-96 小时) 可诱导细胞周期蛋白 B1/cdc2 激酶的早期瞬时激活 (在 HL60 细胞中发生于 1-2 小时内,在 HT29 细胞中发生于 24 小时内),该激活先于细胞凋亡 DNA 片段化和形态学改变的发生。
7-Hydroxystaurosporine (24-48 小时) 以浓度和时间依赖的方式降低 U-87MG 细胞的活力。
7-Hydroxystaurosporine (0-125 nmol/L,24-48 小时) 抑制胶质母细胞瘤 U-87MG 细胞的侵袭行为,这种抑制作用在表达抑癌基因 BRCA1 或 PTEN 的细胞中显著增强,并伴有 E-cadherin 表达的增加。
7-Hydroxystaurosporine (0-125 nmol/L,48 小时) 抑制 U-87MG 细胞的迁移。

Apoptosis Analysis

Cell Line: HL60, K562, HT29 cells
Concentration: 0-10 μM, 10 μM in HL60 cells, 3 μM in K562 and HT29 cells
Incubation Time: 1, 2, and 3 h for HL60 cells, 1, 2, and 3 days for K562 and HT29 cells
Result: Induced apoptotic DNA fragmentation not only in HL60 but also in HT29 and K562 cells independently of p53.
Showed complete DNA fragmentation within 3 h in HL60 cells and 48 h in K562 and HT29 cells.
Showed plasma membrane integrity during apoptosis.

Cell Invasion Assay

Cell Line: U-87MG cells, U-87MG cells transfected with BRCA1 and PTEN
Concentration: 0, 25, 50,75, 100, 125 nmol/L
Incubation Time: 48 h
Result: Markedly concentration-dependently inhibited cell invasion capacity of U-87MG cells, with reductions of approximately 12% and 25%, at 50 and 100 nmol/L, respectively.
Caused an 87% and a 90% inhibition in invasion in cells transfected with BRCA1 and PTEN, respectively.

Western Blot Analysis

Cell Line: U-87MG cells
Concentration: 0, 25, 50,75, 100, 125 nmol/L
Incubation Time: 24 h
Result: Increased E-cadherin levels in a concentration-dependently manner.
Resulted in approximate 2.2- and 6.3-fold increases in the E-cadherin protein at 50 and100 nmol/L, respectively.

Cell Migration Assay

Cell Line: U-87MG cells
Concentration: 50 and 100 nmol/L
Incubation Time: 48 h
Result: Showed an inhibitory effect on the migration of U-87MG cells.
体内研究
(In Vivo)

7-Hydroxystaurosporine (7.5 mg/kg,腹腔注射,每周连续五天,持续 2 周) 在 Br-10 和 MCF-7 乳腺癌异种移植小鼠模型中表现出抗肿瘤作用。

Animal Model: Female BALB/c nu/nu mice (6-7 weeks old) serially subcutaneously transplanted with Br10, MCF-7 and estrogen-independent MX-1 strains, Br-10 and MCF-7 tumor-bearing mice received estradiol and progesterone to support tumor growth
Dosage: 7.5 mg/kg
Administration: i.p., five consecutive days a week for 2 weeks
Result: Suppressed Br-10 tumor growth with a T/C ratio of 27.0% on day 11.
Suppressed MCF-7 tumor growth with a T/C ratio of 25.0% on day 12.
Exhibited positive antitumor activity against Br-10 and MCF-7 tumor strains, but not MX-1.
Resulted in induction of p21 protein and accumulation of dephosphorylation of pRB in both Br-10 and MCF-7.
Only induced p21 in MX-1.
性状 固体
颜色 White to light yellow

化学信息

分子量 482.53
分子式 C28H26N4O4
CAS No. 112953-11-4
别名 UCN-01; KRX-0601

储存&溶解度

储存方式
Powder -20°C 3 years
4°C 2 years
In solvent -80°C 6 months
-20°C 1 month
运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 28 mg/mL (58.03 mM; 超声加热助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM2.0724 mL10.3621 mL20.7241 mL51.8103 mL
5 mM0.4145 mL2.0724 mL4.1448 mL10.3621 mL
10 mM0.2072 mL1.0362 mL2.0724 mL5.1810 mL
15 mM0.1382 mL0.6908 mL1.3816 mL3.4540 mL
20 mM0.1036 mL0.5181 mL1.0362 mL2.5905 mL
25 mM0.0829 mL0.4145 mL0.8290 mL2.0724 mL
30 mM0.0691 mL0.3454 mL0.6908 mL1.7270 mL
40 mM0.0518 mL0.2591 mL0.5181 mL1.2953 mL
50 mM0.0414 mL0.2072 mL0.4145 mL1.0362 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础