Antibacterial agent 352

Antibacterial agent 352 是一种具有口服活性的抗菌剂,可通过氢键、π-π 堆积和疏水作用结合至金黄色葡萄球菌 DNA 促旋酶的活性空腔,从而阻断细菌 DNA 合成,对包括金黄色葡萄球菌、短小芽孢杆菌、表皮葡萄球菌和粪肠球菌在内的革兰氏阳性菌具有抗菌活性,可破坏已形成的金黄色葡萄球菌生物膜并抑制其形成,可用于金黄色葡萄球菌伤口感染的研究。
Antibacterial agent 352
产品编号: MS-Q46760 分子式: C22H16ClN3O5 分子量: 437.83
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Antibacterial agent 352 是一种具有口服活性的抗菌剂,可通过氢键、π-π 堆积和疏水作用结合至金黄色葡萄球菌 DNA 促旋酶的活性空腔,从而阻断细菌 DNA 合成,对包括金黄色葡萄球菌、短小芽孢杆菌、表皮葡萄球菌和粪肠球菌在内的革兰氏阳性菌具有抗菌活性,可破坏已形成的金黄色葡萄球菌生物膜并抑制其形成,可用于金黄色葡萄球菌伤口感染的研究。

生物实验数据

生物活性 Antibacterial agent 352 is an orally active antibacterial agent that binds to the active cavity of Staphylococcus aureus DNA gyrase through hydrogen bonding, π-π stacking, and hydrophobic interactions, thereby blocking bacterial DNA synthesis; it exhibits antibacterial activity against Gram-positive bacteria including Staphylococcus aureus, Bacillus pumilus, Staphylococcus epidermidis, and Enterococcus faecalis, disrupts established Staphylococcus aureus biofilms and inhibits Staphylococcus aureus biofilm formation, and can be used for research on Staphylococcus aureus wound infections.
IC50 & Target

DNA Gyrase

 

体外研究
(In Vitro)

Antibacterial agent 352 (Compound W-2-4) (24 h) 可在体外强效抑制 S. aureus ATCC 6538 (MIC = 2 μg/mL)、B. pumilus AS1.212 (MIC = 2 μg/mL)、S. epidermidis ATCC122228 (MIC = 4 μg/mL) 和 E. faecium AS1.130 (MIC = 0.5 μg/mL) 的生长。
Antibacterial agent 352 (1-8 μg/mL; 24 h) 是针对 S. aureus ATCC 6538 的杀菌剂,其 MBC 为 8 μg/mL (MBC/MIC ratio = 4)。
Antibacterial agent 352 (20-400 μg/mL; 3 h) 会破坏金黄色葡萄球菌 (S. aureus) ATCC 6538 的膜完整性,导致胞内蛋白呈浓度和时间依赖性泄漏。
Antibacterial agent 352 (0.5-8 μg/mL; 24 h) 可呈浓度依赖性破坏预先形成的金黄色葡萄球菌 (S. aureus) ATCC 6538 生物膜,在 8 μg/mL (4×MIC) 浓度下清除率达 67.9%。
Antibacterial agent 352 (1.2-100.0 μg/mL; 72 h) 对 HaCaT 和 H1975 细胞的细胞毒性较低,其 IC50 值大于 100 μM,因此对 S. aureus ATCC 6538 的选择性指数大于 19.9。
Antibacterial agent 352 (8-512 μg/mL; 1 h) 对绵羊红细胞表现出极低的溶血活性,即使在最高达 512 μg/mL 的浓度下,溶血率仍低于 7%。

体内研究
(In Vivo)

Antibacterial agent 352 (10-30 mg/kg;口服;每隔 1 天;共 6 次给予) 在小鼠金黄色葡萄球菌 (S. aureus) 伤口感染模型中展现出剂量依赖性的体内抗菌效力与伤口愈合活性,在 30 mg/kg 口服剂量下可实现细菌完全清除与伤口完全愈合。
Antibacterial agent 352 (30-60 mg/kg;口服;每日;连续 7 天) 在小鼠中无显著急性全身毒性。

Animal Model: KM mice (female, 4-5 weeks old, SPF-grade)
Dosage: 10 mg/kg; 20 mg/kg; 30 mg/kg
Administration: p.o.; every other day; 6 doses
Result: Accelerated wound healing compared to the saline control at 12 days post-treatment.
Reduced bacterial burden in wound tissue by one-log (≈300 CFU at 104 dilution, vs. ≈3000 CFU in the control) at 10 mg/kg dose at 12 days post-treatment.
Achieved a wound healing rate of ≈94.73% (comparable to vancomycin 20 mg/kg) at 20 mg/kg dose at 12 days post-treatment.
Reduced bacterial burden by two-log (17 CFU at 104 dilution) at 20 mg/kg dose at 12 days post-treatment.
Resulted in complete wound healing at 30 mg/kg dose at 12 days post-treatment.
Eradicated all S. aureus from wound tissue (no bacterial colonies recovered) at 30 mg/kg dose at 12 days post-treatment.
Reduced inflammatory cell infiltration, preserved intact tissue structure, and showed regularly arranged collagen fibers (resembling normal tissue) via histopathological analysis at 30 mg/kg dose.

化学信息

分子量 437.83
分子式 C22H16ClN3O5

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础