PDE3/4-IN-4 是一种口服有效的 PDE3A 和 PDE4B 抑制剂,对 PDE3A 的 IC50 为 10 nM,对 PDE4B 的 IC50 为 9.4 nM,且相对于大多数其他 PDE 家族成员表现出选择性活性,可通过调控 cAMP/PKA/CREB 信号通路抑制促炎因子 IL-6、降低肝组织中炎性标志物的表达并减轻肝纤维化程度,从而限制胆汁淤积和脓毒症诱导的肝病小鼠模型中的肝损伤,可用于肝损伤、胆汁淤积性肝病及脓毒症诱导的肝损伤相关研究。
产品编号: MS-Q42752 CAS No.: 3088024-27-2 分子式: C30H27F2N5O4 分子量: 559.56
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PDE3/4-IN-4 是一种口服有效的 PDE3A 和 PDE4B 抑制剂,对 PDE3A 的 IC50 为 10 nM,对 PDE4B 的 IC50 为 9.4 nM,且相对于大多数其他 PDE 家族成员表现出选择性活性,可通过调控 cAMP/PKA/CREB 信号通路抑制促炎因子 IL-6、降低肝组织中炎性标志物的表达并减轻肝纤维化程度,从而限制胆汁淤积和脓毒症诱导的肝病小鼠模型中的肝损伤,可用于肝损伤、胆汁淤积性肝病及脓毒症诱导的肝损伤相关研究。

生物实验数据

生物活性 PDE3/4-IN-4 is an orally active inhibitor of PDE3A and PDE4B with an IC50 of 10 nM for PDE3A and 9.4 nM for PDE4B, and it exhibits selective activity relative to most other PDE family members; by modulating the cAMP/PKA/CREB signaling pathway, it inhibits the pro-inflammatory factor IL-6, reduces the expression of inflammatory markers in liver tissue, and alleviates the degree of liver fibrosis, thereby limiting liver injury in mouse models of cholestasis- and sepsis-induced liver disease, and it can be used for research related to liver injury, cholestatic liver disease, and sepsis-induced liver injury.
IC50 & Target PDE3A:10 nM
体外研究
(In Vitro)

PDE3/4-IN-4 (compound D5) (10-60 μM;作用 24 h) 在浓度高达 60 μM、作用 24 h 的条件下,对人正常肝细胞 LO2 未表现出显著毒性。
PDE3/4-IN-4 (compound D5) 可抑制 Lipopolysaccharides (LPS) (MS-X54539) 刺激的 LO2 细胞中 IL-6 的分泌,其 IC50 为 14.89 μM。
PDE3/4-IN-4 (compound D5) (15 μM;LPS 刺激前预处理 12 h) 可上调 LPS 诱导的 LO2 细胞中 p-CREB 和 p-PKA 的表达。
PDE3/4-IN-4 (compound D5) 在小鼠、大鼠、犬、猴及人肝微粒体中具有充足的代谢稳定性。

Western Blot Analysis

Cell Line: LPS-induced LO2 cells
Concentration: 15 μM (pre-treatment before LPS stimulation)
Incubation Time: 12 h (pre-treatment before 4 h LPS stimulation)
Result: Markedly increased the expression of phosphorylated CREB (p-CREB) and phosphorylated PKA (p-PKA) compared to LPS-induced cells; confirmed increased p-CREB expression via immunofluorescence staining.
体内研究
(In Vivo)

PDE3/4-IN-4 (compound D5) (10-40 mg/kg;灌胃;每日一次;连续 7 天) 可减轻胆管结扎术 (BDL) 小鼠的肝脏炎症与纤维化,其中 40 mg/kg 剂量的疗效更优。
PDE3/4-IN-4 (10-40 mg/kg;灌胃;每日一次;连续 7 天) 可减轻盲肠结扎穿刺术 (CLP) 小鼠的肝脏炎症与损伤,其中 40 mg/kg 剂量的效果更显著。

Animal Model: C57BL/6 (male, 18-22 g, bile duct ligation surgery)
Dosage: 10 mg/kg; 40 mg/kg
Administration: p.o.; daily; 7 days
Result: Significantly reduced hepatic mRNA expression of IL-6 and IL-1β; reduced total bile acid (TBA) and alanine aminotransferase (ALT) levels; partially restored liver architecture (HE staining); increased hepatic p-CREB and p-PKA expression; reduced collagen deposition (Masson staining, 40 mg/kg only); showed greater efficacy at 40 mg/kg.
Animal Model: C57BL/6 (male, 18-22 g, cecal ligation and puncture surgery)
Dosage: 10 mg/kg; 40 mg/kg
Administration: p.o.; daily; 7 days
Result: Reduced hepatic mRNA expression of IL-6 and IL-1β; reduced total bile acid (TBA), aspartate aminotransferase (AST), and alanine aminotransferase (ALT) levels; increased hepatic p-CREB and p-PKA expression; reduced hepatic inflammatory cell infiltration and restored hepatocyte structure (HE staining, 40 mg/kg only); reduced collagen deposition (Masson staining, 40 mg/kg only); showed greater efficacy at 40 mg/kg.

化学信息

分子量 559.56
分子式 C30H27F2N5O4
CAS No. 3088024-27-2

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础