HER2-targeted peptide H10

HER2-targeted peptide H10 是一种 Kd 值为 30.4 nM 的 HER2 靶向肽,与纳米颗粒偶联时可在异种移植小鼠的 HER2 阳性肿瘤组织中特异性聚集,可用于 HER2 阳性乳腺癌的相关研究。
产品编号: MS-Q31345 CAS No.: 1802710-54-8 分子式: C50H83N17O12 分子量: 1114.30
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

HER2-targeted peptide H10 是一种 Kd 值为 30.4 nM 的 HER2 靶向肽,与纳米颗粒偶联时可在异种移植小鼠的 HER2 阳性肿瘤组织中特异性聚集,可用于 HER2 阳性乳腺癌的相关研究。

生物实验数据

生物活性 HER2-targeted peptide H10 is a HER2-targeting peptide with a Kd value of 30.4 nM that, when conjugated to nanoparticles, specifically accumulates in HER2-positive tumor tissues in xenograft mice and can be used for research related to HER2-positive breast cancer.
体外研究
(In Vitro)

HER2-targeted peptide H10 (H10) (5.0 × 10-5 M; 30 min at 4 °C) 可特异性结合高表达 HER2 的 SKBR-3 细胞,而不结合低表达 HER2 的 293A 细胞;在 HER2 表达下调的 SKBR-3 细胞中,该结合作用完全消失。
HER2-targeted peptide H10 (0.1-100 μM) 表现出低细胞毒性,在受试细胞中,0.1 μM 至 100 μM 的浓度范围内细胞存活率接近 100%。

Immunofluorescence

Cell Line: human breast cancer SKBR-3 cells, human embryonic kidney 293A cells, HER2-downregulated RNAi SKBR-3 cells
Concentration: 5.0 × 10-5 M (FITC-labeled H10); 1 mM (Hoechst 33342)
Incubation Time: 30 min (at 4 °C)
Result: Showed strong green fluorescence signal on the membrane of SKBR-3 cells, but no significant binding to 293A cells.
Drastically reduced green fluorescence signal in HER2-downregulated RNAi SKBR-3 cells.
Measured a 53.32% binding rate of FITC-H10 to SKBR-3 cells via flow cytometry.
体内研究
(In Vivo)

HER2-targeted peptide H10 (2 μM;静脉注射;单次) 偶联量子点在裸鼠的 HER2 阳性乳腺癌异种移植物中特异性聚集,与非靶向量子点相比,其肿瘤荧光强度高且生物分布良好。

Animal Model: BALB/c nude mice (8-week-old female)
Dosage: 2 μM
Administration: i.v.; single dose
Result: Showed specific accumulation at the tumor site in in vivo imaging.
Confirmed high fluorescence intensity in tumor tissue, with relatively lower accumulation in liver and spleen compared to H6-Qdot705.
Reached quantitative ex vivo fluorescence intensity of ~65,000 ×106 photons/cm2/s in tumors.

化学信息

分子量 1114.30
分子式 C50H83N17O12
CAS No. 1802710-54-8

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础