PROTAC Sirt2 Degrader-2

PROTAC Sirt2 Degrader-2 是一种靶向 SIRT2 的高效选择性 PROTAC 降解剂,在体外和体内均表现出极强的抗增殖活性,可显著提高 H4K16Ac 水平,显著抑制克隆形成和迁移、诱导细胞周期阻滞并促进细胞凋亡 (apoptosis),并通过间接降解 SIRT2 及阻断下游蛋白磷酸化来抑制 AKT/mTOR 信号通路,从而破坏信号级联反应并抑制肿瘤发展,可用于卵巢癌的研究 (粉色: SIRT3 配体 (MS-L05338);蓝色: Cereblon 配体 (MS-O60836);黑色: 连接子)。
PROTAC Sirt2 Degrader-2
产品编号: MS-Q30455 分子式: C37H42N6O5S 分子量: 682.83
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

PROTAC Sirt2 Degrader-2 是一种靶向 SIRT2 的高效选择性 PROTAC 降解剂,在体外和体内均表现出极强的抗增殖活性,可显著提高 H4K16Ac 水平,显著抑制克隆形成和迁移、诱导细胞周期阻滞并促进细胞凋亡 (apoptosis),并通过间接降解 SIRT2 及阻断下游蛋白磷酸化来抑制 AKT/mTOR 信号通路,从而破坏信号级联反应并抑制肿瘤发展,可用于卵巢癌的研究 (粉色: SIRT3 配体 (MS-L05338);蓝色: Cereblon 配体 (MS-O60836);黑色: 连接子)。

生物实验数据

生物活性 PROTAC Sirt2 Degrader-2 is a highly potent and selective PROTAC degrader targeting SIRT2 that exhibits strong antiproliferative activity both in vitro and in vivo, significantly increases H4K16Ac levels, markedly inhibits colony formation and migration, induces cell cycle arrest, and promotes apoptosis, and inhibits the AKT/mTOR signaling pathway by indirectly degrading SIRT2 and blocking downstream protein phosphorylation, thereby disrupting the signaling cascade and suppressing tumor development, and can be used for the study of ovarian cancer (pink: SIRT3 ligand (MS-L05338); blue: Cereblon ligand (MS-O60836); black: linker).
IC50 & Target

SIRT2

 

Cereblon

 

体外研究
(In Vitro)

PROTAC Sirt2 Degrader-2 (Compound W10) (72 小时) 对多种卵巢癌细胞系表现出强效的抗增殖活性和高选择性,包括 SKOV3 (IC50 = 0.33 μM) 、OVCAR3 (IC50 = 0.25 μM) 和 A2780 (IC50 = 0.08 μM) 卵巢癌细胞,同时对正常细胞 IOSE80 的毒性较低 (CC50 = 2.64 μM)。
PROTAC Sirt2 Degrader-2 (0.01-20 μM,6-48 小时) 能高效且选择性地降解 A2780 卵巢癌细胞中的 SIRT2 蛋白。其作用机制具有浓度和时间依赖性,但在高浓度下会出现钩状效应。
PROTAC Sirt2 Degrader-2 (1 小时) 能提高 A2780 卵巢癌细胞中 SIRT2 蛋白的热稳定性,表明 PROTAC Sirt2 Degrader-2 直接与 SIRT2 结合并稳定其结构。
PROTAC Sirt2 Degrader-2 (0.01-5 μM,14 天) 以浓度依赖的方式抑制 A2780 细胞的克隆形成。
PROTAC Sirt2 Degrader-2 (0.01-10 μM,36 小时) 诱导 A2780 细胞在 S 期和 G2/M 期发生细胞周期阻滞。
PROTAC Sirt2 Degrader-2 (0.01-10 μM,36 小时) 以浓度依赖的方式诱导 A2780 细胞的早期和晚期凋亡,其中晚期凋亡更为显著。

Western Blot Analysis

Cell Line: A2780 ovarian cancer cells
Concentration: 0.001 μM, 0.01 μM, 0.1 μM, 1 μM, 10 μM, 20 μM
Incubation Time: 6 h, 9 h, 12 h, 24 h, 36 h, 48 h
Result: Degradation was concentration-dependent (effective at 0.01 μmol/L, optimal at 1 μM, and exhibited a hook effect at 20 μM).
Degradation was time-dependent (significant effect after 36 hours).

Cell Cycle Analysis

Cell Line: A2780 ovarian cancer cells
Concentration: 0.01 μM, 0.1 μM, 1 μM, 10 μM
Incubation Time: 36 h
Result: Induced cell cycle arrest in A2780 cells during the S and G2/M phases.
体内研究
(In Vivo)

PROTAC Sirt2 Degrader-2 (Compound W10) (3-10 mg/kg,腹腔注射,每两天一次) 可显著抑制 A2780 荷瘤小鼠的肿瘤生长,且无明显毒性,并能有效降解体内的 SIRT2 蛋白。

Animal Model: 5 × 106 cells human ovarian cancer cell line A2780 were injected subcutaneously into the right axillary region of female BALB/c nude mice (4 weeks old).
Dosage: 3 mg/kg, 5 mg/kg, 10 mg/kg
Administration: I.p., once every two days
Result: Significantly inhibited the growth of ovarian cancer xenografts.
Mice maintained stable body weight.
Effectively degraded SIRT2 protein in vivo.
The proportion of Ki-67 positive cells was significantly reduced, indicating that tumor cell proliferation was inhibited.

化学信息

分子量 682.83
分子式 C37H42N6O5S

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础