Senazodan hydrochloride

Synonyms: MCI 154 hydrochloride
Senazodan (MCI 154) (hydrochloride) 是一种 Ca2+ 感光剂,同时可抑制 PDE III 的活性。
产品编号: MS-Q28254 纯度: 99.84% CAS No.: 98326-33-1 分子式: C15H15ClN4O 分子量: 302.76
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
3-5 天
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价
(0.1 - 0.2mg)
询价
询价

产品描述

Senazodan (MCI 154) (hydrochloride) 是一种 Ca2+ 感光剂,同时可抑制 PDE III 的活性。

生物实验数据

生物活性 Senazodan (MCI 154) (hydrochloride) is a Ca2+ sensitizer that also inhibits PDE III activity.
IC50 & Target

PDE III

体外研究
(In Vitro)

Senazodan (hydrochloride) seems to affect directly the actin-myosin crossbridge kinetics, and increases myosin ATPase activity. Senazodan (hydrochloride) produces a concentration-dependent increase in tension development. Senazodan (hydrochloride) enhances Ca2+ binding to myofilaments and to purified cardiac troponin C. Senazodan (hydrochloride) also enhances contractility in guinea-pig papillary muscles by inhibiting PDE III.Senazodan (0.1 nM~0.1 mM) (hydrochloride) shows that the contractile response of superior mesenteric arterie (SMA) to norepinephrine (NE) after hemorrhagic shock is significantly decreased as compared with the normal control group. Senazodan (0.01 mM) (hydrochloride) pretreatment prevents the effects of Ang II, and the concentration-response curve of Ca2+ is shifted to the right as compared with Ang II-alone group.

体内研究
(In Vivo)

Senazodan (0.1~2.0 mg/kg; left femoral vein catheterization infusion) (hydrochloride) decreases the pressor effect of norepinephrine (NE).
Senazodan (0.1 mg/kg; i.v.) (hydrochloride) makes LVSP, IP, MC, and Lo all increased significantly, while heart rate is not obviously changed and left ventricular end-diastolic pressure (LVEDP) is reduced remarkably.

Animal Model: Wistar rats (200~250 g)
Dosage: 0.1~2.0 mg/kg
Administration: Left femoral vein catheterization infusion
Result: Decreased the pressor effect of norepinephrine (NE).
Animal Model: Rabbits
Dosage: 0.1 mg/kg
Administration: I.v.
Result: LVSP, IP, MC, and Lo all were increased significantly while heart rate was not obviously changed and left ventricular end-diastolic pressure (LVEDP) was reduced remarkably.
性状 固体
颜色 Light yellow to yellow

化学信息

分子量 302.76
分子式 C15H15ClN4O
CAS No. 98326-33-1
别名 MCI 154 hydrochloride

储存&溶解度

体内实验配方
10% DMSO+40% PEG300+5% Tween 80+45% Saline: 2 mg/mL (6.61 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式

4°C, sealed storage, away from moisture and light

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 67.5 mg/mL (222.95 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

H2O 中的溶解度 : 25 mg/mL (82.57 mM; 超声助溶)

可选溶剂浓度1 mg5 mg10 mg25 mg
H2O / DMSO1 mM3.3029 mL16.5147 mL33.0295 mL82.5737 mL
5 mM0.6606 mL3.3029 mL6.6059 mL16.5147 mL
10 mM0.3303 mL1.6515 mL3.3029 mL8.2574 mL
15 mM0.2202 mL1.1010 mL2.2020 mL5.5049 mL
20 mM0.1651 mL0.8257 mL1.6515 mL4.1287 mL
25 mM0.1321 mL0.6606 mL1.3212 mL3.3029 mL
30 mM0.1101 mL0.5505 mL1.1010 mL2.7525 mL
40 mM0.0826 mL0.4129 mL0.8257 mL2.0643 mL
50 mM0.0661 mL0.3303 mL0.6606 mL1.6515 mL
60 mM0.0550 mL0.2752 mL0.5505 mL1.3762 mL
80 mM0.0413 mL0.2064 mL0.4129 mL1.0322 mL
DMSO100 mM0.0330 mL0.1651 mL0.3303 mL0.8257 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础