AM 103 是一种具有选择性且有效的 FLAP 抑制剂,IC50 值为 4.2 nM。
产品编号: MS-P83871 纯度: 99.59% CAS No.: 1147872-22-7 分子式: C36H38N3NaO4S 分子量: 631.76
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
10mM * 1mL in DMSO
询价
3-5 天
1mg
询价
3-5 天
5mg
询价
3-5 天
10mg
询价
询价
25mg
询价
询价
50mg
询价
询价
100mg
询价
询价
200mg
询价
询价
500mg
询价
询价

产品描述

AM 103 是一种具有选择性且有效的 FLAP 抑制剂,IC50 值为 4.2 nM。

生物实验数据

生物活性 AM 103 is a selective and potent FLAP inhibitor with an IC50 value of 4.2 nM.
IC50 & Target FLAP:4.2 nM
体外研究
(In Vitro)

AM 103 has an IC50 value of 349 nM in the human blood LTB4 inhibition assay. AM 103 has an excellent CYP profile against the 5 most common CYP isoforms with IC50 values greater than 30 μM for CYP2D6 and >50 μM for CYPs 3A4, 2C9 2C19, and 1A2. AM103 is a novel, potent, and selective FLAP inhibitor with IC50 values of 350, 113, and 117 nM against human, rat, and mouse whole-blood ionophore-stimulated LTB4 production, respectively.

体内研究
(In Vivo)

AM 103 has high bioavailability (64%), low clearance (2.9 mL/min/kg), low volume of distribution (0.41 L/kg), and a long i.v. half-life (5.2 h) in dogs. AM 103 (10 mg/kg q.i.d.) inhibits the increase in CysLTs and EPO by approximately 60%, and IL-5 levels are reduced to the concentrations obtained following saline treatment alone in mice. AM103 (1 mg/kg, p.o.) displays >50% inhibition for up to 6 h with a calculated EC50 of appr 60 nM, in a rat ex vivo whole-blood calcium ionophore-induced LTB4 assay. AM 103 inhibits LTB4 and cysteinyl leukotriene (CysLT) production with ED50 values of 0.8 and 1 mg/kg, respectively, when rat lung is challenged in vivo with calcium ionophore. In this model, the EC50 derived from plasma AM103 is appr 330 nM for inhibition of both LTB4 and CysLT. In a model of chronic lung inflammation using ovalbumin-primed and challenged BALB/c mice, AM103 reduces the concentrations of eosinophil peroxidase, CysLTs, and interleukin-5 in the bronchoalveolar lavage fluid. Finally, AM 103 increases survival time in mice exposed to a lethal intravenous injection of platelet-activating factor.

性状 固体
颜色 Off-white to light yellow

化学信息

分子量 631.76
分子式 C36H38N3NaO4S
CAS No. 1147872-22-7

储存&溶解度

体内实验配方
10% DMSO+90% Corn Oil: 5 mg/mL (7.91 mM), Sonication is recommended.
请按顺序添加溶剂,在添加下一种溶剂之前,尽可能使溶液澄清。如有必要,可通过加热、超声、涡旋处理进行溶解。工作液建议现配现用。以上配方仅供参考,体内配方并不是绝对的,请根据不同情况进行调整。
储存方式

4°C, sealed storage, away from moisture and light

*In solvent: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)

运输条件 Room temperature in continental US; may vary elsewhere.
溶液配制表

DMSO 中的溶解度 : 200 mg/mL (316.58 mM; 超声助溶; 吸湿的 DMSO 对产品的溶解度有显著影响,请使用新开封的 DMSO)

可选溶剂浓度1 mg5 mg10 mg25 mg
DMSO1 mM1.5829 mL7.9144 mL15.8288 mL39.5720 mL
5 mM0.3166 mL1.5829 mL3.1658 mL7.9144 mL
10 mM0.1583 mL0.7914 mL1.5829 mL3.9572 mL
15 mM0.1055 mL0.5276 mL1.0553 mL2.6381 mL
20 mM0.0791 mL0.3957 mL0.7914 mL1.9786 mL
25 mM0.0633 mL0.3166 mL0.6332 mL1.5829 mL
30 mM0.0528 mL0.2638 mL0.5276 mL1.3191 mL
40 mM0.0396 mL0.1979 mL0.3957 mL0.9893 mL
50 mM0.0317 mL0.1583 mL0.3166 mL0.7914 mL
60 mM0.0264 mL0.1319 mL0.2638 mL0.6595 mL
80 mM0.0198 mL0.0989 mL0.1979 mL0.4946 mL
100 mM0.0158 mL0.0791 mL0.1583 mL0.3957 mL

* 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。
储备液的保存方式和期限:-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)。-80°C储存时,请在6个月内使用,-20°C储存时,请在1个月内使用。

该溶液配制表仅适用于固体产品。对于液体产品,请根据标明的浓度或密度计算稀释方案。

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础