PAIR2 是一种靶向人源 IRE1α 激酶结构域的高选择性抑制剂,对人源 IRE1α 的 Ki 值为 8.8 nM,可完全占据 IRE1α 激酶结构域的 ATP 结合位点,部分拮抗 IRE1α 的核糖核酸酶活性,特异性抑制受调控的 IRE1α 依赖性降解 (RIDD) 及其介导的底物切割,同时保留 Xbp1 mRNA 的剪接功能,还能促进 B 细胞向浆细胞分化、阻断 IRE1α 诱导的细胞凋亡 (apoptosis)、恢复 AT2 细胞中 Fgfr2 mRNA 的表达,并能有效在小家鼠肺组织中达到稳态浓度,是研究肺纤维化等疾病中 IRE1α 信号通路功能的重要工具。
产品编号: MS-P43475 CAS No.: 2771006-54-1 分子式: C27H26F4N6O3S 分子量: 590.59
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
询价
5mg
询价
询价
10mg
询价
询价

产品描述

PAIR2 是一种靶向人源 IRE1α 激酶结构域的高选择性抑制剂,对人源 IRE1α 的 Ki 值为 8.8 nM,可完全占据 IRE1α 激酶结构域的 ATP 结合位点,部分拮抗 IRE1α 的核糖核酸酶活性,特异性抑制受调控的 IRE1α 依赖性降解 (RIDD) 及其介导的底物切割,同时保留 Xbp1 mRNA 的剪接功能,还能促进 B 细胞向浆细胞分化、阻断 IRE1α 诱导的细胞凋亡 (apoptosis)、恢复 AT2 细胞中 Fgfr2 mRNA 的表达,并能有效在小家鼠肺组织中达到稳态浓度,是研究肺纤维化等疾病中 IRE1α 信号通路功能的重要工具。

生物实验数据

生物活性 PAIR2 is a highly selective inhibitor targeting the human IRE1α kinase domain with a Ki of 8.8 nM for human IRE1α; it fully occupies the ATP-binding site of the IRE1α kinase domain, partially antagonizes IRE1α ribonuclease activity, specifically inhibits regulated IRE1α-dependent decay (RIDD) and its mediated substrate cleavage while preserving Xbp1 mRNA splicing, promotes B cell-to-plasma cell differentiation, blocks IRE1α-induced apoptosis, restores Fgfr2 mRNA expression in AT2 cells, and effectively achieves steady-state concentrations in mouse lung tissue, making it an important tool for studying the function of IRE1α signaling pathways in diseases such as pulmonary fibrosis.
IC50 & Target

IRE1α

8.8 nM (Ki)

FGFR2

 

体外研究
(In Vitro)

PAIR2 (1-10 μM; 1 h+6 h doxycycline (MS-M54651)) 可剂量依赖性地阻断多西环素诱导的 INS-1::PCMV/2xTetO 细胞中 IRE1α 的自磷酸化。
PAIR2 (0.5-10 μM; 1 h+2 h DTT (MS-V97800)) 维持经 DTT 应激处理的亲本 INS-1 细胞中 XBP1 mRNA 的剪接。
PAIR2 (2 μM; 24 h Thapsigargin (MS-N00779)) 可挽救 Thapsigargin 应激的无血清、无饲养层小鼠原代 AT2 类器官中 Fgfr2 mRNA 的表达,同时保留 IRE1α 介导的 Xbp1 剪接。
PAIR2 (2 μM; 3-d) 无法在 pemigatinib 直接阻断 Fgfr 信号通路时,阻止小鼠原代无血清、无饲养层 AT2 细胞向 DATCs 的转化。

Western Blot Analysis

Cell Line: INS-1::PCMV/2xTetO rat insulinoma cells (doxycycline-inducible IRE1α overexpression)
Concentration: 1, 3, 10 μM
Incubation Time: 1 h (PAIR2 pre-incubation); 6 h (doxycycline treatment)
Result: Dose-dependently blocked doxycycline-induced IRE1α autophosphorylation, reducing phosphorylated IRE1α levels to near baseline at concentrations ≥3 μM, with equivalent potency to KIRA8.

RT-PCR

Cell Line: parent INS-1 rat insulinoma cells
Concentration: 0.5, 1, 3, 10 μM
Incubation Time: 1 h (PAIR2 pre-incubation); 2 h (DTT treatment)
Result: Preserved DTT-induced XBP1 mRNA splicing at all tested concentrations, with no significant reduction in splicing percentage relative to DTT-only treated cells (all P values > 0.05, non-significant).
体内研究
(In Vivo)

PAIR2 (30 mg/kg;腹腔注射;每日 2 次) 选择性抑制 RIDD,可减少 AT2 细胞向促纤维化过渡细胞的分化,并保护 C57BL/6 小鼠免受 Bleomycin (MS-R86735) 诱导的肺纤维化。

Animal Model: C57BL/6 (10-20 week-old, both male and female, bleomycin-induced pulmonary fibrosis)
Dosage: 30 mg/kg
Administration: i.p.; twice daily; starting 1 day before bleomycin exposure and continuing through study end
Result: Reduced fraction of trace+Krt8+ / trace+ cells compared to vehicle control at day 10 post-bleomycin exposure.
Significantly lowered lung hydroxyproline content and reduced fibrillar collagen deposition via picrosirius red staining at day 14 post-bleomycin exposure.
Derepressed expression of canonical RIDD target Bloc1s1 in lung tissue.
Did not significantly affect Xbp1 splicing.

化学信息

分子量 590.59
分子式 C27H26F4N6O3S
CAS No. 2771006-54-1

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础