DXL625 是一种具有自嗜性的 CD20 靶向剂,可触发依赖完整脂筏和细胞外 Ca2+ 的下游凋亡 (apoptosis) 信号通路,诱导癌细胞发生半胱天冬酶介导的凋亡并选择性靶向处于活跃增殖 S 期的细胞,同时介导癌细胞和原代 B 淋巴细胞的补体依赖的细胞毒性,可用于伯基特淋巴瘤、B 细胞淋巴瘤的相关研究。
DXL625
产品编号: MS-O14191
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
询价
5mg
询价
询价
10mg
询价
询价

产品描述

DXL625 是一种具有自嗜性的 CD20 靶向剂,可触发依赖完整脂筏和细胞外 Ca2+ 的下游凋亡 (apoptosis) 信号通路,诱导癌细胞发生半胱天冬酶介导的凋亡并选择性靶向处于活跃增殖 S 期的细胞,同时介导癌细胞和原代 B 淋巴细胞的补体依赖的细胞毒性,可用于伯基特淋巴瘤、B 细胞淋巴瘤的相关研究。

生物实验数据

生物活性 DXL625 is a self-consuming CD20-targeting agent that triggers a downstream apoptosis signaling pathway dependent on intact lipid rafts and extracellular Ca2+, induces caspase-mediated apoptosis in cancer cells with selective targeting of cells in the actively proliferating S phase, and mediates complement-dependent cytotoxicity in cancer cells and primary B lymphocytes, making it applicable to research on Burkitt lymphoma and B-cell lymphoma.
体外研究
(In Vitro)

DXL625 (1-25 μg/mL; 24 h, 48 h) 可诱导 Ramos 伯基特淋巴瘤细胞内 ATP 含量呈剂量依赖性和时间依赖性降低,且效力均优于利妥昔单抗。
DXL625 (1-25 μg/mL; 24 h) 可在 Ramos 伯基特淋巴瘤细胞中诱导剂量依赖性的 caspase 介导的细胞凋亡,在最高测试浓度 (25 μg/mL) 处理 24 小时后,有 30.0% 的细胞发生凋亡。
DXL625 (10 μg/mL; 24 h) 可诱导 Ramos 伯基特淋巴瘤细胞发生 caspase 介导的细胞凋亡,经 10 μg/mL DXL625 处理 24 小时后,活化 caspase 呈阳性的细胞占比为 24.2%。
DXL625 (10 μg/mL; 2 h) 可诱导 Ramos 伯基特淋巴瘤细胞发生补体依赖性细胞毒性,在添加 5% (v/v) 兔补体血清的条件下,以 10 μg/mL DXL625 处理 2 小时后,细胞死亡率达 56.5%。
DXL625 (10 μg/mL; 2 h) 对健康供体外周血淋巴细胞中的原代 CD19+ B 淋巴细胞保留补体依赖性细胞毒性活性;在添加 5% (v/v) 兔补体血清的条件下,以 10 μg/mL DXL625 处理 2 小时后,CD19+细胞群比例降至 3.1%。
DXL625 (10 μg/mL; 24 h) 可诱导 Ramos 伯基特淋巴瘤细胞中 NK 细胞介导的抗体依赖性细胞毒性增强,在效靶比为 6:1、10 μg/mL DXL625 处理 24 小时后,可将标准化细胞活力降至 0.56。

Cell Viability Assay

Cell Line: Ramos Burkitt’s lymphoma cells
Concentration: 1-25 μg/mL
Incubation Time: 24 h; 48 h
Result: Reduced cellular ATP content by 18.4%, 26.4%, 29.7%, and 31.1% at concentrations of 1, 5, 10, and 25 μg/mL, respectively, after 24 hours compared to vehicle-treated cells.
Reduced cellular ATP content by 36.5%, 46.3%, 48.3%, and 48.5% at concentrations of 1, 5, 10, and 25 μg/mL, respectively, after 48 hours compared to vehicle-treated cells.
Showed statistically significant reductions compared to vehicle and Rituxan at all tested concentrations and time points.

Apoptosis Analysis

Cell Line: Ramos Burkitt’s lymphoma cells
Concentration: 1-25 μg/mL
Incubation Time: 24 h
Result: Induced a dose-dependent increase in apoptotic sub-G0/G1 cells: 9.5%, 21.0%, 24.9%, and 30.0% at concentrations of 1, 5, 10, and 25 μg/mL, respectively.
Showed significantly higher apoptotic cell percentages than Rituxan at the same concentrations.
Displayed apoptotic cells with reduced forward scatter and increased side scatter, consistent with apoptotic progression.

Apoptosis Analysis

Cell Line: Ramos Burkitt’s lymphoma cells
Concentration: 10 μg/mL
Incubation Time: 24 h
Result: Resulted in 24.2% caspase-positive cells, which was double the rate seen with equivalent Rituxan treatment.
Showed caspase-positive cells with morphological features consistent with apoptosis, matching the sub-G0/G1 population identified by PI staining.

化学信息

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础