Tracizoline 是一种口服有效的 I2-imidazoline 受体激动剂,可对 I2-imidazoline 受体进行功能性调节,调控海马区 FADD 细胞命运衔接蛋白,减轻机械性和热痛觉过敏,以极弱的部分激动作用激活 α2A-adrenergic 受体,并通过激活 5-HT1A 受体诱导类抗抑郁活性,可用于炎性疼痛、神经性疼痛及抑郁症的相关研究。
产品编号: MS-O03011 CAS No.: 65248-90-0 分子式: C11H12N2 分子量: 172.23
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
50mg
询价
询价
100mg
询价
询价
250mg
询价
询价

产品描述

Tracizoline 是一种口服有效的 I2-imidazoline 受体激动剂,可对 I2-imidazoline 受体进行功能性调节,调控海马区 FADD 细胞命运衔接蛋白,减轻机械性和热痛觉过敏,以极弱的部分激动作用激活 α2A-adrenergic 受体,并通过激活 5-HT1A 受体诱导类抗抑郁活性,可用于炎性疼痛、神经性疼痛及抑郁症的相关研究。

生物实验数据

生物活性 Tracizoline is an orally effective I2-imidazoline receptor agonist that functionally modulates I2-imidazoline receptors, regulates the hippocampal FADD cell fate adaptor protein, alleviates mechanical and thermal hyperalgesia, activates α2A-adrenergic receptors with very weak partial agonism, and induces antidepressant-like activity via activation of 5-HT1A receptors, and it can be used in research related to inflammatory pain, neuropathic pain, and depression.
IC50 & Target

5-HT1A Receptor

 

α2-adrenergic receptor

 

体内研究
(In Vivo)

Tracizoline (10 mg/kg;腹腔注射;每日一次;连续 7 天) 可使 6 月龄和 12 月龄雄性 Sprague-Dawley 大鼠的海马 FADD 蛋白含量显著升高 19%。
Tracizoline (10 mg/kg;腹腔注射;每日 1 次,连续 7 天或 24 小时内给药 3 次) 不会改变 9~10 月龄雄性 Sprague-Dawley 大鼠的体重、体温、认知表现或类情感行为。
Tracizoline (3.2-32 mg/kg;腹腔注射) 可在 CFA 诱导的炎性疼痛大鼠中产生剂量依赖性的抗痛觉过敏作用,对机械性痛觉过敏的最大 MPE 达 62.1%,对热痛觉过敏的最大 MPE 达 72.0%,其 ED50 值分别约为 10.3 mg/kg 和 10.4 mg/kg。

Animal Model: Sprague-Dawley (male, 6 or 12 months old)
Dosage: 10 mg/kg
Administration: i.p.; daily; 7 days
Result: Increased hippocampal FADD protein content by 19% compared to saline-treated control rats.
Did not significantly alter hippocampal FADD levels compared to saline-treated control rats.
Animal Model: Sprague-Dawley (male, 9-10 months old)
Dosage: 10 mg/kg
Administration: i.p.; daily for 7 days or three doses over 24 hours
Result: Did not alter body weight over the 7-day treatment period.
Did not induce hypothermia (no significant change in core body temperature compared to controls).
Did not change the time needed to complete the 8-arm radial maze or the number of errors committed on day 1 or day 8.
Did not significantly alter the time spent immobile or climbing in the forced-swim test compared to saline-treated control rats.
Animal Model: Sprague-Dawley (adult male, CFA-induced inflammatory pain)
Dosage: 3.2 mg/kg; 10 mg/kg; 32 mg/kg
Administration: i.p.
Result: Increased paw withdrawal threshold (mechanical hyperalgesia) and paw withdrawal latency (thermal hyperalgesia) dose-dependently in the CFA-treated paw, with no effect on the non-injured paw.
Significantly increased both paw withdrawal threshold and paw withdrawal latency in the CFA-treated paw at 10 mg/kg and 32 mg/kg (P < 0.05).
Produced a maximum of 62.1% maximal possible effect (MPE) in the von Frey test (mechanical hyperalgesia) and 72.0% MPE in the plantar test (thermal hyperalgesia).
Reached ED50 values of 10 mg/kg in the von Frey test and 10 mg/kg in the plantar test.

化学信息

分子量 172.23
分子式 C11H12N2
CAS No. 65248-90-0

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

运输条件 Room temperature in continental US; may vary elsewhere.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础