MEDI-5884

Synonyms: REG-101
MEDI-5884 (REG-101) 是一种靶向内皮脂肪酶 (EL) 的人源化 IgG4Pκ 中和单克隆抗体,对人和食蟹猴 EL 的 IC50 分别为 1.3 nM 和 1.7 nM,Kd 分别为 4.1 nM 和 1.6 nM,可升高血浆 HDL-C、载脂蛋白 A1 (ApoA1) 及磷脂水平,同时使 LDL-C 和载脂蛋白 B (ApoB) 水平出现小幅升高,可用于心血管疾病、冠心病、冠状动脉粥样硬化及稳定型冠状动脉疾病的相关研究。
产品编号: MS-N87568 CAS No.: 2643310-75-0
MolStrong 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务
规格 价格 是否有货 数量 购物车
1mg
询价
询价
5mg
询价
询价
10mg
询价
询价

产品描述

MEDI-5884 (REG-101) 是一种靶向内皮脂肪酶 (EL) 的人源化 IgG4Pκ 中和单克隆抗体,对人和食蟹猴 EL 的 IC50 分别为 1.3 nM 和 1.7 nM,Kd 分别为 4.1 nM 和 1.6 nM,可升高血浆 HDL-C、载脂蛋白 A1 (ApoA1) 及磷脂水平,同时使 LDL-C 和载脂蛋白 B (ApoB) 水平出现小幅升高,可用于心血管疾病、冠心病、冠状动脉粥样硬化及稳定型冠状动脉疾病的相关研究。

生物实验数据

生物活性 MEDI-5884 (REG-101) is a humanized IgG4Pκ neutralizing monoclonal antibody targeting endothelial lipase (EL), with IC50 values of 1.3 nM and 1.7 nM and Kd values of 4.1 nM and 1.6 nM for human and cynomolgus monkey EL, respectively; it elevates plasma HDL-C, apolipoprotein A1 (ApoA1), and phospholipid levels while causing slight increases in LDL-C and apolipoprotein B (ApoB) levels, and can be used in research related to cardiovascular disease, coronary heart disease, coronary atherosclerosis, and stable coronary artery disease.
IC50 & Target

Endothelial lipase

体内研究
(In Vivo)

MEDI-5884 (30 mg/kg;皮下注射;单次给药) 可在体内抑制人内皮脂肪酶活性,使过表达腺病毒 hEL 的小鼠的 HDL-C 水平几乎恢复至基线水平。
MEDI-5884 (0.5-30 mg/kg;皮下注射;单次给药) 可中和食蟹猴体内的内源性内皮脂肪酶,使 HDL-C、ApoA1 和磷脂呈剂量依赖性持续升高,在 30 mg/kg 剂量下,HDL-C 水平升高 1 倍的状态可维持 2 个月。
MEDI-5884 (10 mg/kg;皮下注射;第 28 天和第 42 天各给药 1 次) 可提升经 PCSK9 抑制剂预处理的食蟹猴体内的 HDL-C 水平,同时可缓解相关的 LDL-C 升高现象。

Animal Model: C57BL/6J (8-week-old male, adenoviral overexpression of human endothelial lipase to reduce endogenous HDL-C)
Dosage: 30 mg/kg
Administration: s.c.; single dose
Result: Prevented further reduction in HDL-C and restored HDL-C nearly to baseline concentrations (baseline ~100 mg/dl, day 4 after Ad-hEL ~50 mg/dl, day 5 after treatment ~75 mg/dl).
Animal Model: Macaca fascicularis (2 to 3 years old, male, 2.4 to 3.0 kg)
Dosage: 0.5 mg/kg; 6 mg/kg; 30 mg/kg
Administration: s.c.; single dose
Result: Increased plasma HDL-C, ApoA1, and phospholipids in a dose-dependent manner.
Achieved an approximate twofold increase in HDL-C within 2 weeks at 30 mg/kg, which persisted for 2 months.
Produced similar maximum HDL-C increase at 6 mg/kg, with HDL-C returning to baseline by study end.
Resulted in smaller HDL-C increase at 0.5 mg/kg, which returned to baseline within 3 weeks.
Caused smaller magnitude, dose-dependent increases in LDL-C and ApoB, with no clear effect on triglycerides.
Animal Model: Macaca fascicularis (2 to 3 years old, male, 2.4 to 3.0 kg, pretreated with PCSK9 inhibitor to lower LDL-C)
Dosage: 10 mg/kg
Administration: s.c.; two doses on day 28 and day 42
Result: Maintained ability to raise HDL-C to a similar degree as seen in monkeys without PCSK9 inhibitor pretreatment.
Blunted the magnitude of LDL-C increase relative to MEDI-5884 alone.
Changed ApoA1 and ApoB matching patterns of HDL-C and LDL-C, respectively.
Clinical Trial
NCT NumberSponsorConditionStart DatePhase
NCT03351738MedImmune LLC
Stable Coronary Heart Disease
2017-12-13PHASE2
NCT03001297MedImmune LLC
Healthy Volunteers
2017-01-17PHASE1

化学信息

CAS No. 2643310-75-0
别名 REG-101

储存&溶解度

储存方式

Please store the product under the recommended conditions in the Certificate of Analysis.

计算器

质量 (mg) = 浓度 (mM) x 体积 (mL) x 分子摩尔量 (g/mol)
Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)
起始浓度(M)× 起始体积(L)= 最终浓度(M)× 最终体积(L)
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
This equation is commonly abbreviated as: C1V1 = C2V2
溶液体积 = 质量 ÷ 配液浓度
Volume (to add to vial) = Mass (in vial) ÷ Desired Reconstitution Concentration
÷
分子量计算器
Enter the chemical formula of the compound to calculate its molar mass and elemental composition
g/mol

体内实验配液计算器

动物实验计算换算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:

比如您的给药剂量是10 mg/kg,每只动物体重20 g,给药体积100 μL, 一共给药动物10只,您使用的配方为 10% DMSO + 40% PEG300 + 5% Tween 80 + 45% Saline / PBS / ddH2O, 那么您的工作液浓度为2 mg/mL。

母液配置方法:2 mg 药物溶于 100 μL DMSO ( 母液浓度为 20 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。

体内配方的制备方法: 取 100 μL DMSO 母液, 添加 400 μL PEG300 混匀澄清, 再加 50 μL Tween 80, 混匀澄清, 再加 450 μL Saline / PBS / ddH2O 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

方案所需的各类助溶剂如: DMSO, PEG300, PEG400, Tween 80, SBE-β-CD, 玉米油等, 均可在MolStrong网站点击购买。

第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量)
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系客服为您提供正确的澄清溶液配方)
+
+
+

计算结果:

工作液浓度: mg/ml;

DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,

体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL Saline/PBS/ddH2O,混匀澄清。

1. 首先保证母液是澄清的;
           2. 一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。

开始您的科研之旅

20,0000+ 种高纯度分子化合物,专业靶点数据库,全程技术支持
让每一个实验数据都有坚实的分子基础